Commit 3bf58bb5 authored by Dmitriy Baranov's avatar Dmitriy Baranov Committed by Wolfram Sang

i2c: imx: remove extra spaces.

Signed-off-by: default avatarDmitriy Baranov <dbaranov@dev.rtsoft.ru>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 69e558fa
......@@ -212,7 +212,7 @@ struct imx_i2c_struct {
struct imx_i2c_dma *dma;
};
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
.devtype = IMX1_I2C,
.regshift = IMX_I2C_REGSHIFT,
.clk_div = imx_i2c_clk_div,
......@@ -222,7 +222,7 @@ static const struct imx_i2c_hwdata imx1_i2c_hwdata = {
};
static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
static const struct imx_i2c_hwdata imx21_i2c_hwdata = {
.devtype = IMX21_I2C,
.regshift = IMX_I2C_REGSHIFT,
.clk_div = imx_i2c_clk_div,
......@@ -871,7 +871,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo
if ((!i) && block_data)
msgs->buf[0] = len;
else
msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
dev_dbg(&i2c_imx->adapter.dev,
"<%s> read byte: B%d=0x%X\n",
__func__, i, msgs->buf[i]);
......@@ -916,7 +916,7 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
temp |= I2CR_RSTA;
imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
result = i2c_imx_bus_busy(i2c_imx, 1);
result = i2c_imx_bus_busy(i2c_imx, 1);
if (result)
goto fail0;
}
......@@ -1192,7 +1192,7 @@ static int i2c_imx_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int i2c_imx_runtime_suspend(struct device *dev)
{
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
clk_disable_unprepare(i2c_imx->clk);
......@@ -1201,7 +1201,7 @@ static int i2c_imx_runtime_suspend(struct device *dev)
static int i2c_imx_runtime_resume(struct device *dev)
{
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(i2c_imx->clk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment