Merge tag 'omap-for-v5.15/fixes-rc4' of...

Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.15

Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:

- Fix compiler warning for sysc_init_soc() that got recently introduced

- Fix external abort for am335x pruss as otherwise some am335x will hang

- Use CLKDM_NOAUTO quirk also for dra7 dcan1

- Fix older NAND device node regression for omap3-sdp

* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  soc: ti: omap-prm: Fix external abort for am335x pruss
  bus: ti-sysc: Add break in switch statement in sysc_init_soc()

Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/omap3430-sdp.dts

@@ -101,7 +101,7 @@ partition@280000 {
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */

arch/arm/mach-omap2/omap_hwmod.c

@@ -3614,6 +3614,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,

drivers/bus/ti-sysc.c

@@ -1464,6 +1464,9 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	/* Quirks that need to be set based on detected module */
 	SYSC_QUIRK("aess", 0, 0, 0x10, -ENODEV, 0x40000000, 0xffffffff,
 		   SYSC_MODULE_QUIRK_AESS),
+	/* Errata i893 handling for dra7 dcan1 and 2 */
+	SYSC_QUIRK("dcan", 0x4ae3c000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff,
+		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dcan", 0x48480000, 0x20, -ENODEV, -ENODEV, 0xa3170504, 0xffffffff,
 		   SYSC_QUIRK_CLKDM_NOAUTO),
 	SYSC_QUIRK("dss", 0x4832a000, 0, 0x10, 0x14, 0x00000020, 0xffffffff,
@@ -2954,6 +2957,7 @@ static int sysc_init_soc(struct sysc *ddata)
 			break;
 		case SOC_AM3:
 			sysc_add_disabled(0x48310000);  /* rng */
+			break;
 		default:
 			break;
 		}

drivers/soc/ti/omap_prm.c

@@ -825,25 +825,28 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
 	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
 	spin_unlock_irqrestore(&reset->lock, flags);
 
-	if (!has_rstst)
-		goto exit;
+	/* wait for the reset bit to clear */
+	ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
+						reset->prm->data->rstctrl,
+						v, !(v & BIT(id)), 1,
+						OMAP_RESET_MAX_WAIT);
+	if (ret)
+		pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+		       reset->prm->data->name, id);
 
 	/* wait for the status to be set */
-	ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
+	if (has_rstst) {
+		ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
 						 reset->prm->data->rstst,
 						 v, v & BIT(st_bit), 1,
 						 OMAP_RESET_MAX_WAIT);
-	if (ret)
-		pr_err("%s: timedout waiting for %s:%lu\n", __func__,
-		       reset->prm->data->name, id);
+		if (ret)
+			pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+			       reset->prm->data->name, id);
+	}
 
-exit:
-	if (reset->clkdm) {
-		/* At least dra7 iva needs a delay before clkdm idle */
-		if (has_rstst)
-			udelay(1);
+	if (reset->clkdm)
 		pdata->clkdm_allow_idle(reset->clkdm);
-	}
 
 	return ret;
 }