Import 2.1.76

CREDITS

@@ -537,15 +537,6 @@ S: P.O. Box 76, Epping
 S: N.S.W., 2121
 S: Australia
 
-N: Richard E. Gooch
-E: rgooch@atnf.csiro.au
-D: parent process death signal to children
-D: prctl() syscall
-S: CSIRO Australia Telescope National Facility
-S: P.O. Box 76, Epping
-S: N.S.W., 2121
-S: Australia
-
 N: Dmitry S. Gorodchanin
 E: begemot@bgm.rosprint.net
 D: RISCom/8 driver, misc kernel fixes.

Documentation/networking/de4x5.txt

@@ -11,9 +11,9 @@
     Digital Semiconductor   SROM   Specification.    The  driver   currently
     recognises the following chips:
 
-        DC21040     (no SROM)
-	DC21041[A]
-	DC21140[A]
+        DC21040  (no SROM) 
+	DC21041[A]  
+	DC21140[A] 
 	DC21142 
 	DC21143 
 
@@ -57,7 +57,7 @@
     1) copy de4x5.c from the  /linux/drivers/net directory to your favourite
     temporary directory.
     2) for fixed  autoprobes (not  recommended),  edit the source code  near
-    line 5537 to reflect the I/O address  you're using, or assign these when
+    line 5594 to reflect the I/O address  you're using, or assign these when
     loading by:
 
                    insmod de4x5 io=0xghh           where g = bus number
@@ -92,6 +92,16 @@
     can compile with a  DEC_ONLY define, or if  loading as a module, use the
     'dec_only=1'  parameter. 
 
+    I've changed the timing routines to  use the kernel timer and scheduling
+    functions  so that the  hangs  and other assorted problems that occurred
+    while autosensing the  media  should be gone.  A  bonus  for the DC21040
+    auto  media sense algorithm is  that it can now  use one that is more in
+    line with the  rest (the DC21040  chip doesn't  have a hardware  timer).
+    The downside is the 1 'jiffies' (10ms) resolution.
+
+    IEEE 802.3u MII interface code has  been added in anticipation that some
+    products may use it in the future.
+
     The SMC9332 card  has a non-compliant SROM  which needs fixing -  I have
     patched this  driver to detect it  because the SROM format used complies
     to a previous DEC-STD format.
@@ -133,11 +143,36 @@
     is  the preferred way to use   this driver, since  it  doesn't have this
     limitation.
 
-    Where SROM  media detection is used and  full duplex is specified in the
-    SROM, the feature is ignored unless de4x5_full_duplex  is set at compile
-    time OR during a module  load (insmod de4x5 de4x5_full_duplex=1).   This
-    is because there  is no way  to automatically  detect full duplex  links
-    except through  autonegotiation.   When I  include  the  autonegotiation
-    feature  in  the  SROM  autoconf   code,   this detection  will    occur
-    automatically.
-
+    Where SROM media  detection is used and  full duplex is specified in the
+    SROM,  the feature is  ignored unless  lp->params.fdx  is set at compile
+    time  OR during  a   module load  (insmod  de4x5   args='eth??:fdx' [see
+    below]).  This is because there  is no way  to automatically detect full
+    duplex   links  except through   autonegotiation.    When I  include the
+    autonegotiation feature in  the SROM autoconf  code, this detection will
+    occur automatically for that case.
+
+    Command line arguements are  now allowed, similar to  passing arguements
+    through LILO. This will allow a per adapter board set  up of full duplex
+    and media. The only lexical constraints are:  the board name (dev->name)
+    appears in  the list before its parameters.  The list of parameters ends
+    either at the end of the parameter list or with another board name.  The
+    following parameters are allowed:
+
+            fdx        for full duplex
+	    autosense  to set the media/speed; with the following 
+	               sub-parameters:
+		       TP, TP_NW, BNC, AUI, BNC_AUI, 100Mb, 10Mb, AUTO
+
+    Case sensitivity is important  for  the sub-parameters. They *must*   be
+    upper case. Examples:
+
+        insmod de4x5 args='eth1:fdx autosense=BNC eth0:autosense=100Mb'.
+
+    For a compiled in driver, in linux/drivers/net/CONFIG, place e.g.
+	DE4X5_OPTS = -DDE4X5_PARM='"eth0:fdx autosense=AUI eth2:autosense=TP"' 
+
+    Yes,  I know full duplex  isn't permissible on BNC  or AUI; they're just
+    examples. By default, full duplex is turned  off and AUTO is the default
+    autosense setting. In  reality, I expect only the  full duplex option to
+    be used. Note the use of single quotes in the two examples above and the
+    lack of commas to separate items.

Makefile

 VERSION = 2
 PATCHLEVEL = 1
-SUBLEVEL = 75
+SUBLEVEL = 76
 
 ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/)
 
@@ -206,7 +206,6 @@ symlinks:
 	fi
 
 oldconfig: symlinks
-	$(MAKE) -C drivers/sound mkscript
 	$(CONFIG_SHELL) scripts/Configure -d arch/$(ARCH)/config.in
 
 xconfig: symlinks
@@ -339,23 +338,24 @@ clean:	archclean
 	rm -f core `find . -name '*.[oas]' ! -regex '.*lxdialog/.*' -print`
 	rm -f core `find . -type f -name 'core' -print`
 	rm -f vmlinux System.map
-	rm -f .tmp* drivers/sound/configure
+	rm -f .tmp*
 	rm -f drivers/char/consolemap_deftbl.c drivers/char/conmakehash
+	rm -f drivers/sound/bin2hex drivers/sound/hex2hex
 	rm -f `find modules/ -type f -print`
 	rm -f submenu*
 
 mrproper: clean
 	rm -f include/linux/autoconf.h include/linux/version.h
-	rm -f drivers/sound/local.h drivers/sound/.defines
 	rm -f drivers/net/soundmodem/sm_tbl_{afsk1200,afsk2666,fsk9600}.h
 	rm -f drivers/net/soundmodem/sm_tbl_{hapn4800,psk4800}.h
 	rm -f drivers/net/soundmodem/sm_tbl_{afsk2400_7,afsk2400_8}.h
 	rm -f drivers/net/soundmodem/gentbl
 	rm -f drivers/char/hfmodem/gentbl drivers/char/hfmodem/tables.h
+	rm -f drivers/sound/*_boot.h drivers/sound/.*.boot
 	rm -f .version .config* config.in config.old
 	rm -f scripts/tkparse scripts/kconfig.tk scripts/kconfig.tmp
 	rm -f scripts/lxdialog/*.o scripts/lxdialog/lxdialog
-	rm -f .menuconfig .menuconfig.log
+	rm -f .menuconfig.log
 	rm -f include/asm
 	rm -f .depend `find . -name .depend -print`
 	rm -f .hdepend scripts/mkdep
@@ -367,8 +367,6 @@ distclean: mrproper
 	rm -f core `find . \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
                 -o -name '.*.rej' -o -name '.SUMS' -o -size 0 \) -print` TAGS
-#	rm -f drivers/sound/Config.in
-#	cp drivers/sound/Config.std drivers/sound/Config.in
 
 backup: mrproper
 	cd .. && tar cf - linux/ | gzip -9 > backup.gz

arch/alpha/kernel/alpha_ksyms.c

@@ -22,9 +22,11 @@
 #include <linux/interrupt.h>
 #include <asm/softirq.h>
 
+#define __KERNEL_SYSCALLS__
+#include <asm/unistd.h>
+
 extern void bcopy (const char *src, char *dst, int len);
 extern struct hwrpb_struct *hwrpb;
-extern long __kernel_thread(unsigned long, int (*)(void *), void *);
 extern void dump_thread(struct pt_regs *, struct user *);
 extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 
@@ -71,6 +73,7 @@ EXPORT_SYMBOL(strncat);
 EXPORT_SYMBOL(strstr);
 EXPORT_SYMBOL(strtok);
 EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
 EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(__memcpy);
@@ -81,9 +84,21 @@ EXPORT_SYMBOL(dump_thread);
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(hwrpb);
 EXPORT_SYMBOL(wrusp);
-EXPORT_SYMBOL(__kernel_thread);
 EXPORT_SYMBOL(start_thread);
 
+/* In-kernel system calls.  */
+EXPORT_SYMBOL(__kernel_thread);
+EXPORT_SYMBOL(sys_open);
+EXPORT_SYMBOL(sys_dup);
+EXPORT_SYMBOL(sys_exit);
+EXPORT_SYMBOL(sys_write);
+EXPORT_SYMBOL(sys_read);
+EXPORT_SYMBOL(sys_lseek);
+EXPORT_SYMBOL(__kernel_execve);
+EXPORT_SYMBOL(sys_setsid);
+EXPORT_SYMBOL(sys_sync);
+EXPORT_SYMBOL(sys_wait4);
+
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_tcpudp_magic);
 EXPORT_SYMBOL(ip_fast_csum);

arch/alpha/kernel/entry.S

@@ -252,6 +252,28 @@ __kernel_thread:
 	call_pal PAL_halt
 .end	__kernel_thread
 
+/*
+ * __kernel_execve(path, argv, envp, regs)
+ */
+.align 3
+.globl	__kernel_execve
+.ent	__kernel_execve
+__kernel_execve:
+	ldgp	$29,0($27)	/* we can be called from modules.  */
+	subq	$30,16,$30
+	.frame	$30,16,$26,0
+	stq	$26,0($30)
+	stq	$19,8($30)
+	.prologue 1
+	jsr	$26,do_execve
+	bne	$0,1f		/* error! */
+	ldq	$30,8($30)
+	br	$31,ret_from_sys_call
+1:	ldq	$26,0($30)
+	addq	$30,16,$30
+	ret
+.end	__kernel_execve
+
 .align 3
 .ent	do_switch_stack
 do_switch_stack:

arch/i386/kernel/head.S

@@ -172,7 +172,7 @@ checkCPUtype:
 	 * if CPUID works.
 	 */
 	movl $0x69727943,X86_VENDOR_ID			# low 4 chars
-	movl $0x00000078,X86_VENDOR_ID			# next 4 chars
+	movl $0x00000078,X86_VENDOR_ID+4		# next 4 chars
 
 	/*
 	 * N.B. The pattern of accesses to 0x22 and 0x23 is *important*

arch/i386/kernel/setup.c

@@ -356,8 +356,8 @@ static struct cpu_model_info cpu_models[] __initdata = {
 	{ X86_VENDOR_AMD,	5,
 	  { "K5/SSA5 (PR-75, PR-90, PR-100)", "K5 (PR-120, PR-133)",
 	    "K5 (PR-166)", "K5 (PR-200)", NULL, NULL,
-	    "K6 (166 - 266)", "K6 (166 - 300)", "K6 (model 8)",
-	    "K6 (model 9)", NULL, NULL, NULL, NULL, NULL, NULL }},
+	    "K6 (166 - 266)", "K6 (166 - 300)", "K6-3D (200 - 450)",
+	    "K6-3D-Plus (200 - 450)", NULL, NULL, NULL, NULL, NULL, NULL }},
 	{ X86_VENDOR_UMC,	4,
 	  { NULL, "U5D", "U5S", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 	    NULL, NULL, NULL, NULL, NULL, NULL }},

drivers/block/raid5.c

@@ -1019,7 +1019,7 @@ static void handle_stripe(struct stripe_head *sh)
 				if (sh->bh_new[i])
 					continue;
 				block = (int) compute_blocknr(sh, i);
-				bh = efind_buffer(MKDEV(MD_MAJOR, minor), block, sh->size);
+				bh = find_buffer(MKDEV(MD_MAJOR, minor), block, sh->size);
 				if (bh && bh->b_count == 0 && buffer_dirty(bh) && !buffer_locked(bh)) {
 					PRINTK(("Whee.. sector %lu, index %d (%d) found in the buffer cache!\n", sh->sector, i, block));
 					add_stripe_bh(sh, bh, i, WRITE);

drivers/char/bttv.c

@@ -1265,11 +1265,11 @@ static int bttv_ioctl(struct video_device *dev, unsigned int cmd, void *arg)
 	
 		case VIDIOCGAUDIO:
 		{
-			struct video_audio vp;
-			vp=btv->audio_dev;
-			vp.flags&=~(VIDEO_AUDIO_MUTE|VIDEO_AUDIO_MUTABLE);
-			vp.flags|=VIDEO_AUDIO_MUTABLE;
-			strcpy(vp.name,"TV");
+			struct video_audio v;
+			v=btv->audio_dev;
+			v.flags&=~(VIDEO_AUDIO_MUTE|VIDEO_AUDIO_MUTABLE);
+			v.flags|=VIDEO_AUDIO_MUTABLE;
+			strcpy(v.name,"TV");
 			if(copy_to_user(&v,arg,sizeof(v)))
 				return -EFAULT;
 			return 0;

drivers/char/mem.c

@@ -549,6 +549,9 @@ __initfunc(int chr_dev_init(void))
 #endif
 #ifdef CONFIG_FTAPE
 	ftape_init();
+#endif
+#ifdef CONFIG_VIDEO_DEV
+	videodev_init();
 #endif
 	return 0;
 }

drivers/char/pcwd.c

@@ -31,6 +31,8 @@
  * 970912       Enabled board on open and disable on close.
  * 971107	Took account of recent VFS changes (broke read).
  * 971210       Disable board on initialisation in case board already ticking.
+ * 971222       Changed open/close for temperature handling
+ *              Michael Meskes <meskes@debian.org>.
  */
 
 #include <linux/module.h>
@@ -378,14 +380,23 @@ static ssize_t pcwd_write(struct file *file, const char *buf, size_t len,
 
 static int pcwd_open(struct inode *ino, struct file *filep)
 {
-	if (is_open)
-		return -EIO;
-	MOD_INC_USE_COUNT;
-	/*  Enable the port  */
-	if (revision == PCWD_REVISION_C)
-		outb_p(0x00, current_readport + 3);
-	is_open = 1;
-	return(0);
+        switch (MINOR(ino->i_rdev))
+        {
+                case WD_MINOR:
+                    if (is_open)
+                        return -EBUSY;
+                    MOD_INC_USE_COUNT;
+                    /*  Enable the port  */
+                    if (revision == PCWD_REVISION_C)
+                        outb_p(0x00, current_readport + 3);
+                    is_open = 1;
+                    return(0);
+                case TEMP_MINOR:
+                    MOD_INC_USE_COUNT;
+                    return(0);
+                default:
+                    return (-ENODEV);
+        }
 }
 
 static ssize_t pcwd_read(struct file *file, char *buf, size_t count,
@@ -400,7 +411,8 @@ static ssize_t pcwd_read(struct file *file, char *buf, size_t count,
 	switch(MINOR(file->f_dentry->d_inode->i_rdev)) 
 	{
 		case TEMP_MINOR:
-			cp = c;
+		        /* c is in celsius, we need fahrenheit */
+		        cp = (c*9/5)+32;
 			if(copy_to_user(buf, &cp, 1))
 				return -EFAULT;
 			return 1;
@@ -411,15 +423,18 @@ static ssize_t pcwd_read(struct file *file, char *buf, size_t count,
 
 static int pcwd_close(struct inode *ino, struct file *filep)
 {
-	is_open = 0;
 	MOD_DEC_USE_COUNT;
+	if (MINOR(ino->i_rdev)==WD_MINOR)
+	{
+	        is_open = 0;
 #ifndef CONFIG_WATCHDOG_NOWAYOUT
-	/*  Disable the board  */
-	if (revision == PCWD_REVISION_C) {
-		outb_p(0xA5, current_readport + 3);
-		outb_p(0xA5, current_readport + 3);
-	}
+		/*  Disable the board  */
+		if (revision == PCWD_REVISION_C) {
+			outb_p(0xA5, current_readport + 3);
+			outb_p(0xA5, current_readport + 3);
+		}
 #endif
+	}
 	return 0;
 }
 

drivers/net/CONFIG

@@ -44,23 +44,11 @@
 #     DE4X5_DEBUG	Set the desired debug level
 #     DEC_ONLY          Allows driver to work with DIGITAL cards only - 
 #			see linux/drivers/net/README.de4x5
-#     DE4X5_AUTOSENSE   (Default) auto media/mode selection
-#                       If you want at least one board to not autosense then
-#                       no board can autosense. For a board mix of several
-#	                types, OR the manual values [eg for a DE500 (100M) with
-#	                a DE450 (AUI) use '-DDE4X5_AUTOSENSE=(_100Mb|AUI)']
-#                       For full auto media/mode selection           = AUTO
-#                       For manual TP media selection                = TP
-#                       For manual TP/Nway media selection (DC21041) = TP_NW
-#                       For manual BNC media selection               = BNC
-#                       For manual AUI media selection               = AUI
-#                       For manual BNC/AUI media selection (DC21040) = BNC_AUI
-#                       For manual 10Mb/s mode selection   (DC21140) = _10Mb
-#                       For manual 100Mb/s mode selection  (DC21140) = _100Mb
-#                       The DC21040 will default to TP if TP_NW is specified
-#                       The DC21041 will default to BNC if BNC_AUI is specified
 #     DE4X5_DO_MEMCPY   Forces the Intels to use memory copies into sk_buffs
 #	                rather than straight DMA.
+#     DE4X5_PARM	See linux/Documentation/networking/de4x5.txt or the
+#			driver source code for detailed information on setting
+#			duplex and speed/media on individual adapters.
 #
 #  DEFXX		The DIGITAL series of FDDI EISA (DEFEA) and PCI (DEFPA)
 #			controllers
@@ -95,7 +83,7 @@ HP_OPTS		=
 PLIP_OPTS	=
 DEPCA_OPTS	= 
 EWRK3_OPTS	= 
-DE4X5_OPTS	= -DDE4X5_AUTOSENSE=AUTO
+DE4X5_OPTS	= 
 DEFXX_OPTS	=
 ELP_OPTS	=
 TULIP_OPTS	=

drivers/net/Config.in

@@ -15,7 +15,9 @@ fi
 tristate 'Dummy net driver support' CONFIG_DUMMY
 tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
 if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Ethertap network tap' CONFIG_ETHERTAP
+  if [ "CONFIG_NETLINK_DEV" != "n" ]; then
+     dep_tristate 'Ethertap network tap' CONFIG_ETHERTAP $CONFIG_NETLINK_DEV
+  fi
 fi
 #
 #	Ethernet

drivers/net/Makefile

@@ -198,7 +198,7 @@ else
 endif
 
 ifdef CONFIG_PPP
-  M_OBJS += bsd_comp.o
+  M_OBJS += bsd_comp.o ppp_deflate.o
 endif
 
 ifeq ($(CONFIG_SLIP),y)

drivers/net/de4x5.h

@@ -166,11 +166,7 @@
 /*
 ** PCI Configuration Base I/O Address Register (PCI_CBIO)
 */
-#ifdef __sparc_v9__
-#define CBIO_MASK   0xffffffffffffff80       /* Base I/O Address Mask */
-#else
-#define CBIO_MASK   0xffffff80       /* Base I/O Address Mask */
-#endif
+#define CBIO_MASK   -128             /* Base I/O Address Mask */
 #define CBIO_IOSI   0x00000001       /* I/O Space Indicator (RO, value is 1) */
 
 /*
@@ -368,7 +364,7 @@
 #define OMR_SIA     (OMR_SDP | OMR_TTM)
 #define OMR_SYM     (OMR_SDP | OMR_SCR | OMR_PCS | OMR_HBD | OMR_PS)
 #define OMR_MII_10  (OMR_SDP | OMR_TTM | OMR_PS)
-#define OMR_MII_100 (OMR_SDP | OMR_SCR | OMR_HBD | OMR_PS)
+#define OMR_MII_100 (OMR_SDP | OMR_HBD | OMR_PS)
 
 /*
 ** DC21040 Interrupt Mask Register (DE4X5_IMR)
@@ -813,16 +809,22 @@
 
 /*
 ** Media / mode state machine definitions
+** User selectable:
 */
-#define NC              0x0000     /* No Connection                        */
 #define TP              0x0001     /* 10Base-T                             */
 #define TP_NW           0x0002     /* 10Base-T with Nway                   */
 #define BNC             0x0004     /* Thinwire                             */
 #define AUI             0x0008     /* Thickwire                            */
 #define BNC_AUI         0x0010     /* BNC/AUI on DC21040 indistinguishable */
-#define ANS             0x0020     /* Intermediate AutoNegotiation State   */
 #define _10Mb           0x0040     /* 10Mb/s Ethernet                      */
 #define _100Mb          0x0080     /* 100Mb/s Ethernet                     */
+#define AUTO            0x4000     /* Auto sense the media or speed        */
+
+/*
+** Internal states
+*/
+#define NC              0x0000     /* No Connection                        */
+#define ANS             0x0020     /* Intermediate AutoNegotiation State   */
 #define SPD_DET         0x0100     /* Parallel speed detection             */
 #define INIT            0x0200     /* Initial state                        */
 #define EXT_SIA         0x0400     /* External SIA for motherboard chip    */
@@ -834,7 +836,6 @@
 #define AUI_SUSPECT     0x0807     /* Suspect the AUI port is down         */
 #define MII             0x1000     /* MII on the 21143                     */
 
-#define AUTO            0x4000     /* Auto sense the media or speed        */
 #define TIMER_CB        0x80000000 /* Timer callback detection             */
 
 /*
@@ -907,6 +908,7 @@
 #define OPEN                 2     /* Running */
 
 /*
+** Various wait times
 */
 #define PDET_LINK_WAIT    1200    /* msecs to wait for link detect bits     */
 #define ANS_FINISH_WAIT   1000    /* msecs to wait for link detect bits     */
@@ -936,12 +938,13 @@
   } else if (lp->useSROM && !lp->useMII) {\
     omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
     omr |= (lp->fdx ? OMR_FDX : 0);\
-    outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
+    outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
   } else {\
     omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
     omr |= (lp->fdx ? OMR_FDX : 0);\
-    outl(omr | OMR_TTM, DE4X5_OMR);\
+    outl(omr | OMR_SDP | OMR_TTM, DE4X5_OMR);\
     lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD);\
+    gep_wr(lp->cache.gep, dev);\
   }\
 }
 
@@ -964,12 +967,13 @@
   } else if (lp->useSROM && !lp->useMII) {\
     omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
     omr |= (lp->fdx ? OMR_FDX : 0);\
-    outl(omr | (lp->infoblock_csr6 & ~(OMR_SCR | OMR_HBD)), DE4X5_OMR);\
+    outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
   } else {\
     omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
     omr |= (lp->fdx ? OMR_FDX : 0);\
-    outl(omr | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
     lp->cache.gep = (lp->fdx ? 0 : GEP_FDXD) | GEP_MODE;\
+    gep_wr(lp->cache.gep, dev);\
   }\
 }
 
@@ -981,11 +985,12 @@
     outl(omr, DE4X5_OMR);\
   } else if (lp->useSROM && !lp->useMII) {\
     omr = (inl(DE4X5_OMR) & ~(OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
-    outl(omr | lp->infoblock_csr6, DE4X5_OMR);\
+    outl(omr, DE4X5_OMR);\
   } else {\
     omr = (inl(DE4X5_OMR) & ~(OMR_PS | OMR_HBD | OMR_TTM | OMR_PCS | OMR_SCR | OMR_FDX));\
-    outl(omr | OMR_PS | OMR_HBD | OMR_PCS | OMR_SCR, DE4X5_OMR);\
+    outl(omr | OMR_SDP | OMR_PS | OMR_HBD | OMR_PCS, DE4X5_OMR);\
     lp->cache.gep = (GEP_FDXD | GEP_MODE);\
+    gep_wr(lp->cache.gep, dev);\
   }\
 }
 

drivers/net/ppp_deflate.c

@@ -55,11 +55,7 @@
 #include <linux/ioctl.h>
 
 #include <linux/ppp_defs.h>
-
-#undef	 PACKETPTR
-#define	 PACKETPTR 1
 #include <linux/ppp-comp.h>
-#undef	 PACKETPTR
 
 #include "zlib.c"
 

drivers/net/zlib.c

 /*
- * This file is derived from various .h and .c files from the zlib-0.95
+ * This file is derived from various .h and .c files from the zlib-1.0.4
  * distribution by Jean-loup Gailly and Mark Adler, with some additions
  * by Paul Mackerras to aid in implementing Deflate compression and
  * decompression for PPP packets.  See zlib.h for conditions of
@@ -8,15 +8,13 @@
  * Changes that have been made include:
  * - added Z_PACKET_FLUSH (see zlib.h for details)
  * - added inflateIncomp and deflateOutputPending
- * - changed DEBUG_ZLIB to DEBUG_ZLIB
- * - use ZALLOC_INIT rather than ZALLOC for allocations during initialization
  * - allow strm->next_out to be NULL, meaning discard the output
  *
- * $Id: zlib.c,v 1.2 1997/10/02 17:59:23 davem Exp $
+ * $Id: zlib.c,v 1.3 1997/12/23 10:47:42 paulus Exp $
  */
 
 /* 
- *  ==FILEVERSION 970501==
+ *  ==FILEVERSION 971210==
  *
  * This marker is used by the Linux installation script to determine
  * whether an up-to-date version of this file is already installed.
@@ -50,23 +48,20 @@
 #include "zlib.h"
 
 #if defined(KERNEL) || defined(_KERNEL)
-/* Assume this is a *BSD kernel */
+/* Assume this is a *BSD or SVR4 kernel */
 #include <sys/types.h>
 #include <sys/time.h>
 #include <sys/systm.h>
 #  define HAVE_MEMCPY
-#  define zmemcpy(d, s, n)	bcopy((s), (d), (n))
-#  define zmemzero		bzero
-#  define zmemcmp		bcmp
+#  define memcpy(d, s, n)	bcopy((s), (d), (n))
+#  define memset(d, v, n)	bzero((d), (n))
+#  define memcmp		bcmp
 
 #else
 #if defined(__KERNEL__)
 /* Assume this is a Linux kernel */
 #include <linux/string.h>
 #define HAVE_MEMCPY
-#define zmemcpy 		memcpy
-#define zmemzero(dest, len)	memset(dest, 0, len)
-#define zmemcmp			memcmp
 
 #else /* not kernel */
 
@@ -959,7 +954,7 @@ local void flush_pending(strm)
     if (len > strm->avail_out) len = strm->avail_out;
     if (len == 0) return;
 
-    if (strm->next_out != NULL) {
+    if (strm->next_out != Z_NULL) {
 	zmemcpy(strm->next_out, s->pending_out, len);
 	strm->next_out += len;
     }
@@ -4893,7 +4888,7 @@ int r;
     z->adler = s->check = (*s->checkfn)(s->check, q, n);
 
   /* copy as far as end of window */
-  if (p != NULL) {
+  if (p != Z_NULL) {
     zmemcpy(p, q, n);
     p += n;
   }
@@ -4921,7 +4916,7 @@ int r;
       z->adler = s->check = (*s->checkfn)(s->check, q, n);
 
     /* copy */
-    if (p != NULL) {
+    if (p != Z_NULL) {
       zmemcpy(p, q, n);
       p += n;
     }

drivers/net/zlib.h

-/*	$Id: zlib.h,v 1.1 1997/10/02 02:35:37 paulus Exp $	*/
+/*	$Id: zlib.h,v 1.2 1997/12/23 10:47:44 paulus Exp $	*/
 
 /*
- * This file is derived from zlib.h and zconf.h from the zlib-0.95
+ * This file is derived from zlib.h and zconf.h from the zlib-1.0.4
  * distribution by Jean-loup Gailly and Mark Adler, with some additions
  * by Paul Mackerras to aid in implementing Deflate compression and
  * decompression for PPP packets.
  */
 
 /*
- *  ==FILEVERSION 970501==
+ *  ==FILEVERSION 971127==
  *
  * This marker is used by the Linux installation script to determine
  * whether an up-to-date version of this file is already installed.

drivers/pci/pci.c

@@ -50,11 +50,12 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( NCR,		NCR_53C895,	"53c895"),
 	DEVICE( NCR,		NCR_53C885,	"53c885"),
 	DEVICE( NCR,		NCR_53C875,	"53c875"),
-	DEVICE( NCR,		NCR_53C876,	"53c876"),
+	DEVICE( NCR,		NCR_53C875J,	"53c875J"),
 	DEVICE( ATI,		ATI_68800,      "68800AX"),
 	DEVICE( ATI,		ATI_215CT222,   "215CT222"),
 	DEVICE( ATI,		ATI_210888CX,   "210888CX"),
 	DEVICE( ATI,		ATI_215GB,	"Mach64 GB"),
+	DEVICE( ATI,		ATI_215GD,	"Mach64 GD (Rage Pro)"),
 	DEVICE( ATI,		ATI_215GP,	"Mach64 GP (Rage Pro)"),
 	DEVICE( ATI,		ATI_215GT,	"Mach64 GT (Rage II)"),
 	DEVICE( ATI,		ATI_215GTB,	"Mach64 GT (Rage II)"),
@@ -110,7 +111,7 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( AMD,		AMD_SCSI,	"53C974"),
 	DEVICE( TRIDENT,	TRIDENT_9420,	"TG 9420"),
 	DEVICE( TRIDENT,	TRIDENT_9440,	"TG 9440"),
-	DEVICE( TRIDENT,	TRIDENT_9660,	"TG 9660"),
+	DEVICE( TRIDENT,	TRIDENT_9660,	"TG 9660 / Cyber9385"),
 	DEVICE( TRIDENT,	TRIDENT_9750,	"Image 975"),
 	DEVICE( AI,		AI_M1435,	"M1435"),
 	DEVICE( MATROX,		MATROX_MGA_2,	"Atlas PX2085"),
@@ -186,6 +187,14 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( NEXGEN,		NEXGEN_82C501,	"82C501"),
 	DEVICE( QLOGIC,		QLOGIC_ISP1020,	"ISP1020"),
 	DEVICE( QLOGIC,		QLOGIC_ISP1022,	"ISP1022"),
+	DEVICE( CYRIX,		CYRIX_5510,	"5510"),
+	DEVICE( CYRIX,		CYRIX_PCI_MASTER,"PCI Master"),
+	DEVICE( CYRIX,		CYRIX_5520,	"5520"),
+	DEVICE( CYRIX,		CYRIX_5530_LEGACY,"5530 Kahlua Legacy"),
+	DEVICE( CYRIX,		CYRIX_5530_SMI,	"5530 Kahlua SMI"),
+	DEVICE( CYRIX,		CYRIX_5530_IDE,	"5530 Kahlua IDE"),
+	DEVICE( CYRIX,		CYRIX_5530_AUDIO,"5530 Kahlua Audio"),
+	DEVICE( CYRIX,		CYRIX_5530_VIDEO,"5530 Kahlua Video"),
 	DEVICE( LEADTEK,	LEADTEK_805,	"S3 805"),
 	DEVICE( CONTAQ,		CONTAQ_82C599,	"82C599"),
 	DEVICE( OLICOM,		OLICOM_OC3136,	"OC-3136/3137"),
@@ -245,7 +254,8 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( TEKRAM2,	TEKRAM2_690c,	"DC690c"),
 	DEVICE( TUNDRA,		TUNDRA_CA91C042,"CA91C042 Universe"),
 	DEVICE( AMCC,		AMCC_MYRINET,	"Myrinet PCI (M2-PCI-32)"),
-	DEVICE( AMCC,		AMCC_S5933,	"S5933"),
+	DEVICE( AMCC,		AMCC_S5933,	"S5933 PCI44"),
+	DEVICE( AMCC,		AMCC_S5933_HEPC3,"S5933 Traquair HEPC3"),
 	DEVICE( INTERG,		INTERG_1680,	"IGA-1680"),
 	DEVICE( INTERG,         INTERG_1682,    "IGA-1682"),
 	DEVICE( REALTEK,	REALTEK_8029,	"8029"),
@@ -311,6 +321,7 @@ struct pci_dev_info dev_info[] = {
  	DEVICE( DIGI,		DIGI_RIGHTSWITCH, "RightSwitch SE-6"),
 	DEVICE( MUTECH,		MUTECH_MV1000,	"MV-1000"),
 	DEVICE( RENDITION,	RENDITION_VERITE,"Verite 1000"),
+	DEVICE( RENDITION,	RENDITION_VERITE2100,"Verite 2100"),
 	DEVICE( TOSHIBA,	TOSHIBA_601,	"Laptop"),
 	DEVICE( RICOH,		RICOH_RL5C466,	"RL5C466"),
 	DEVICE( ZEITNET,	ZEITNET_1221,	"1221"),
@@ -336,6 +347,9 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( CYCLADES,	CYCLOM_Z_Lo,	"Cyclom-Z below 1Mbyte"),
 	DEVICE( CYCLADES,	CYCLOM_Z_Hi,	"Cyclom-Z above 1Mbyte"),
 	DEVICE( 3DFX,		3DFX_VOODOO,	"Voodoo"),
+	DEVICE( STALLION,	STALLION_ECHPCI832,"EasyConnection 8/32"),
+	DEVICE( STALLION,	STALLION_ECHPCI864,"EasyConnection 8/64"),
+	DEVICE( STALLION,	STALLION_EIOPCI,"EasyIO"),
 	DEVICE( SIGMADES,	SIGMADES_6425,	"REALmagic64/GX"),
 	DEVICE( OPTIBASE,	OPTIBASE_FORGE,	"MPEG Forge"),
 	DEVICE( OPTIBASE,	OPTIBASE_FUSION,"MPEG Fusion"),
@@ -371,6 +385,9 @@ struct pci_dev_info dev_info[] = {
 	DEVICE( S3,		S3_PLATO_PXG,	"PLATO/PX (graphics)"),
 	DEVICE( S3,		S3_ViRGE_DXGX,	"ViRGE/DX or /GX"),
 	DEVICE( S3,		S3_ViRGE_GX2,	"ViRGE/GX2"),
+	DEVICE( S3,		S3_ViRGE_MX,	"ViRGE/MX"),
+	DEVICE( S3,		S3_ViRGE_MXP,	"ViRGE/MX+"),
+	DEVICE( S3,		S3_ViRGE_MXPMV,	"ViRGE/MX+MV"),
 	DEVICE( INTEL,		INTEL_82375,	"82375EB"),
 	DEVICE( INTEL,		INTEL_82424,	"82424ZX Saturn"),
 	DEVICE( INTEL,		INTEL_82378,	"82378IB"),
@@ -582,6 +599,7 @@ const char *pci_strvendor(unsigned int vendor)
 	      case PCI_VENDOR_ID_APPLE:		return "Apple";
 	      case PCI_VENDOR_ID_NEXGEN:	return "Nexgen";
 	      case PCI_VENDOR_ID_QLOGIC:	return "Q Logic";
+	      case PCI_VENDOR_ID_CYRIX:		return "Cyrix";
 	      case PCI_VENDOR_ID_LEADTEK:	return "Leadtek Research";
 	      case PCI_VENDOR_ID_CONTAQ:	return "Contaq";
 	      case PCI_VENDOR_ID_FOREX:		return "Forex";
@@ -637,6 +655,7 @@ const char *pci_strvendor(unsigned int vendor)
 	      case PCI_VENDOR_ID_RP:		return "Comtrol";
 	      case PCI_VENDOR_ID_CYCLADES:	return "Cyclades";
 	      case PCI_VENDOR_ID_3DFX:		return "3Dfx";
+	      case PCI_VENDOR_ID_STALLION:	return "Stallion Technologies";
 	      case PCI_VENDOR_ID_SIGMADES:	return "Sigma Designs";
 	      case PCI_VENDOR_ID_OPTIBASE:	return "Optibase";
 	      case PCI_VENDOR_ID_ENSONIQ:	return "Ensoniq";

drivers/scsi/ncr53c8xx.c

@@ -9359,8 +9359,7 @@ static int ncr53c8xx_pci_init(Scsi_Host_Template *tpnt,
 #if defined(__i386) && !defined(MODULE)
 	if ((driver_setup.pci_fix_up & 1) &&
 	    (chip->features & FE_CLSE) && cache_line_size == 0) {
-		extern char x86;
-		switch(x86) {
+	    	switch(boot_cpu_data.x86) {
 		case 4:	cache_line_size = 4; break;
 		case 5:	cache_line_size = 8; break;
 		}

drivers/scsi/st.c

@@ -995,7 +995,6 @@ st_write(struct file * filp, const char * buf, size_t count, loff_t *ppos)
       return -ENXIO;
     }
 
-    STp = &(scsi_tapes[dev]);
     if (STp->ready != ST_READY) {
       if (STp->ready == ST_NO_TAPE)
 	return (-ENOMEDIUM);
@@ -1510,7 +1509,6 @@ st_read(struct file * filp, char * buf, size_t count, loff_t *ppos)
       return -ENXIO;
     }
 
-    STp = &(scsi_tapes[dev]);
     if (STp->ready != ST_READY) {
       if (STp->ready == ST_NO_TAPE)
 	return (-ENOMEDIUM);
@@ -2298,10 +2296,9 @@ st_int_ioctl(struct inode * inode,
 
    ioctl_result = (STp->buffer)->last_result_fatal;
 
-   scsi_release_command(SCpnt);
-   SCpnt = NULL;
-
    if (!ioctl_result) {  /* SCSI command successful */
+     scsi_release_command(SCpnt);
+     SCpnt = NULL;
      STps->drv_block = blkno;
      STps->drv_file = fileno;
      STps->at_sm = at_sm;
@@ -2349,7 +2346,8 @@ st_int_ioctl(struct inode * inode,
        STp->partition = 0;
      }
 
-   } else {  /* SCSI command was not completely successful */
+   } else {  /* SCSI command was not completely successful. Don't return
+	        from this block without releasing the SCSI command block! */
 
      if (SCpnt->sense_buffer[2] & 0x40) {
        if (cmd_in != MTBSF && cmd_in != MTBSFM &&
@@ -2430,6 +2428,9 @@ st_int_ioctl(struct inode * inode,
 
      if (cmd_in == MTLOCK)
        STp->door_locked = ST_LOCK_FAILS;
+
+     scsi_release_command(SCpnt);
+     SCpnt = NULL;
    }
 
    return ioctl_result;
@@ -2591,7 +2592,6 @@ set_location(struct inode * inode, unsigned int block, int partition,
     if (!SCpnt)
       return (-EBUSY);
 
-    SCpnt->request.rq_status = RQ_INACTIVE;  /* Mark as not busy */
     STps->drv_block = STps->drv_file = (-1);
     STps->eof = ST_NOEOF;
     if ((STp->buffer)->last_result_fatal != 0) {

drivers/sound/.objects

-OBJS=
-
-ifdef CONFIG_AD1848
-	OBJS := $(OBJS)  ad1848.o
-endif
-
-ifdef CONFIG_YM3812
-	OBJS := $(OBJS)  adlib_card.o
-endif
-
-ifdef CONFIG_AUDIO
-	OBJS := $(OBJS)  audio.o
-endif
-
-ifdef CONFIG_CS4232
-	OBJS := $(OBJS)  cs4232.o
-endif
-
-ifdef CONFIG_AUDIO
-	OBJS := $(OBJS)  dmabuf.o
-endif
-
-ifdef CONFIG_GUSHW
-	OBJS := $(OBJS)  gus_card.o gus_midi.o gus_vol.o gus_wave.o ics2101.o
-endif
-
-ifdef CONFIG_MAD16
-	OBJS := $(OBJS)  mad16.o
-endif
-
-ifdef CONFIG_MAUI
-	OBJS := $(OBJS)  maui.o
-endif
-
-ifdef CONFIG_MIDI
-	OBJS := $(OBJS)  midi_synth.o midibuf.o
-endif
-
-ifdef CONFIG_MPU401
-	OBJS := $(OBJS)  mpu401.o
-else
-  ifdef CONFIG_MPU_EMU
-	OBJS := $(OBJS)  mpu401.o
-  endif
-endif
-
-ifdef CONFIG_YM3812
-	OBJS := $(OBJS)  opl3.o
-endif
-
-ifdef CONFIG_PAS
-	OBJS := $(OBJS)  pas2_card.o pas2_midi.o pas2_mixer.o pas2_pcm.o
-endif
-
-ifdef CONFIG_PSS
-	OBJS := $(OBJS)  pss.o
-endif
-
-ifdef CONFIG_SBDSP
-	OBJS := $(OBJS) sb_card.o sb_common.o sb_audio.o sb_mixer.o sb_midi.o
-endif
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sequencer.o
-endif
-
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sound_timer.o
-endif
-
-ifdef CONFIG_SSCAPEHW
-	OBJS := $(OBJS)  sscape.o
-endif
-
-ifdef CONFIG_TRIX
-	OBJS := $(OBJS)  trix.o
-endif
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sys_timer.o
-endif
-
-ifdef CONFIG_UART6850
-	OBJS := $(OBJS)  uart6850.o
-endif
-
-ifdef CONFIG_UART401
-	OBJS := $(OBJS)  uart401.o
-endif
-
-ifdef CONFIG_OPL3SA1
-	OBJS := $(OBJS)  opl3sa.o
-endif
-
-ifdef CONFIG_SOFTOSS
-	OBJS := $(OBJS)  softoss.o softoss_rs.o
-endif
-
-ifdef CONFIG_VMIDI
-	OBJS := $(OBJS)  v_midi.o
-endif

drivers/sound/.objects.orig

-OBJS=
-
-ifdef CONFIG_AD1848
-	OBJS := $(OBJS)  ad1848.o
-endif
-
-ifdef CONFIG_YM3812
-	OBJS := $(OBJS)  adlib_card.o
-endif
-
-ifdef CONFIG_AUDIO
-	OBJS := $(OBJS)  audio.o
-endif
-
-ifdef CONFIG_CS4232
-	OBJS := $(OBJS)  cs4232.o
-endif
-
-ifdef CONFIG_AUDIO
-	OBJS := $(OBJS)  dmabuf.o
-endif
-
-ifdef CONFIG_GUSHW
-	OBJS := $(OBJS)  gus_card.o gus_midi.o gus_vol.o gus_wave.o ics2101.o
-endif
-
-ifdef CONFIG_MAD16
-	OBJS := $(OBJS)  mad16.o
-endif
-
-ifdef CONFIG_MAUI
-	OBJS := $(OBJS)  maui.o
-endif
-
-ifdef CONFIG_MIDI
-	OBJS := $(OBJS)  midi_synth.o midibuf.o
-endif
-
-ifdef CONFIG_MPU401
-	OBJS := $(OBJS)  mpu401.o
-else
-  ifdef CONFIG_MPU_EMU
-	OBJS := $(OBJS)  mpu401.o
-  endif
-endif
-
-ifdef CONFIG_YM3812
-	OBJS := $(OBJS)  opl3.o
-endif
-
-ifdef CONFIG_PAS
-	OBJS := $(OBJS)  pas2_card.o pas2_midi.o pas2_mixer.o pas2_pcm.o
-endif
-
-ifdef CONFIG_PSS
-	OBJS := $(OBJS)  pss.o
-endif
-
-ifdef CONFIG_SBDSP
-	OBJS := $(OBJS) sb_card.o sb_common.o sb_audio.o sb_mixer.o sb_midi.o
-endif
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sequencer.o
-endif
-
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sound_timer.o
-endif
-
-ifdef CONFIG_SSCAPEHW
-	OBJS := $(OBJS)  sscape.o
-endif
-
-ifdef CONFIG_TRIX
-	OBJS := $(OBJS)  trix.o
-endif
-
-ifdef CONFIG_SEQUENCER
-	OBJS := $(OBJS)  sys_timer.o
-endif
-
-ifdef CONFIG_UART6850
-	OBJS := $(OBJS)  uart6850.o
-endif
-
-ifdef CONFIG_UART401
-	OBJS := $(OBJS)  uart401.o
-endif
-
-ifdef CONFIG_OPL3SA1
-	OBJS := $(OBJS)  opl3sa.o
-endif
-
-ifdef CONFIG_SOFTOSS
-	OBJS := $(OBJS)  softoss.o softoss_rs.o
-endif
-

drivers/sound/Config.std

-#
-# Sound driver configuration
-#
-#--------
-# There is another confic script which is compatible with rest of
-# the kernel. It can be activated by running 'make mkscript' in this
-# directory. Please note that this is an _experimental_ feature which
-# doesn't work with all cards (PSS, SM Wave, AudioTriX Pro, Maui).
-#--------
-#
-$MAKE -C drivers/sound config || exit 1
-
-bool 'Additional low level drivers' CONFIG_LOWLEVEL_SOUND
-
-if [ "$CONFIG_LOWLEVEL_SOUND" = "y" ]; then
-   bool 'ACI mixer (miroPCM12)' CONFIG_ACI_MIXER
-   bool 'AWE32 synth' CONFIG_AWE32_SYNTH
-   bool 'Gallant Audio Cards (SC-6000 and SC-6600 based)' CONFIG_AEDSP16
-
-   if [ "$CONFIG_AEDSP16" = "y" ]; then
-      comment 'SC-6600 Audio Cards have no jumper switches at all'
-      bool 'SC-6600 based audio cards (new Audio Excel DSP 16)' CONFIG_SC6600
-
-      if [ "$CONFIG_SB" = "y" -a "$CONFIG_AEDSP16_MSS" != "y" ]; then
-         bool 'Audio Excel DSP 16 (SBPro emulation)' CONFIG_AEDSP16_SBPRO
-         if [ "$CONFIG_AEDSP16_SBPRO" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [Sound Blaster Pro]'
-            hex 'I/O base for Audio Excel DSP 16 220 or 240' \
-	                                           AEDSP16_BASE $SBC_BASE
-            int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' \
-	                                           AEDSP16_SBC_IRQ $SBC_IRQ
-            int 'Audio Excel DSP 16 DMA 0, 1 or 3' AEDSP16_SBC_DMA $SBC_DMA
-         fi
-      fi
-   
-      if [ "$CONFIG_MSS" = "y" -a "$CONFIG_AEDSP16_SBPRO" != "y" ]; then
-         bool 'Audio Excel DSP 16 (MSS emulation)' CONFIG_AEDSP16_MSS
-         if [ "$CONFIG_AEDSP16_MSS" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [Microsoft Sound System]'
-	    hex 'I/O base for Audio Excel DSP 16 220 or 240' AEDSP16_BASE 220
-            int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11' \
-	                                           AEDSP16_MSS_IRQ $MSS_IRQ
-            int 'Audio Excel DSP 16 DMA 0, 1 or 3' AEDSP16_MSS_DMA $MSS_DMA
-         fi
-      fi
-
-      if [ "$CONFIG_MPU401" = "y" ]; then
-         bool 'Audio Excel DSP 16 (MPU401 emulation)' CONFIG_AEDSP16_MPU401
-         if [ "$CONFIG_AEDSP16_MPU401" = "y" ]; then
-	    comment 'Audio Excel DSP 16 [MPU-401]'
-	    if [ "$CONFIG_AEDSP16_SBPRO" != "y" \
-	         -a "$CONFIG_AEDSP16_MSS" != "y" ]; then
-	       hex 'I/O base for Audio Excel DSP 16 220 or 240' AEDSP16_BASE 220
-	    fi
-            int 'MPU401 IRQ for Audio Excel DSP 16 5, 7, 9, 10 or 0 (disable)' \
-	    						AEDSP16_MPU_IRQ $MPU_IRQ
-         fi
-      fi
-
-      if [ "$CONFIG_SC6600" = "y" ]; then
-         comment 'SC-6600 specific configuration'
-         bool 'Activate SC-6600 Joystick Interface' CONFIG_SC6600_JOY
-         int 'SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)' \
-	 					CONFIG_SC6600_CDROM 4
-         hex 'SC-6600 CDROM Interface I/O Address' CONFIG_SC6600_CDROMBASE 0
-      fi
-
-   fi
-fi

drivers/sound/Defines

+# This used to be a computer generated file, but it's not any more.
+# Edit all you need!
+
+ifdef CONFIG_PSS
+ifneq ($(CONFIG_MPU_EMU),Y)
+CONFIG_MPU_EMU=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_MPU_EMU),Y)
+CONFIG_MPU_EMU=y
+endif
+endif
+
+ifdef CONFIG_CS4232
+ifneq ($(CONFIG_MPU_EMU),Y)
+CONFIG_MPU_EMU=y
+endif
+endif
+
+ifdef CONFIG_MAUI
+ifneq ($(CONFIG_MPU_EMU),Y)
+CONFIG_MPU_EMU=y
+endif
+endif
+
+ifdef CONFIG_PSS
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_GUS16
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_GUSMAX
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_MSS
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_CS4232
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_OPL3SA1
+ifneq ($(CONFIG_AD1848),Y)
+CONFIG_AD1848=y
+endif
+endif
+
+ifdef CONFIG_SB
+ifneq ($(CONFIG_SBDSP),Y)
+CONFIG_SBDSP=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_SBDSP),Y)
+CONFIG_SBDSP=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_SBDSP),Y)
+CONFIG_SBDSP=y
+endif
+endif
+
+ifdef CONFIG_SB
+ifneq ($(CONFIG_UART401),Y)
+CONFIG_UART401=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_UART401),Y)
+CONFIG_UART401=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_UART401),Y)
+CONFIG_UART401=y
+endif
+endif
+
+ifdef CONFIG_OPL3SA1
+ifneq ($(CONFIG_UART401),Y)
+CONFIG_UART401=y
+endif
+endif
+
+ifdef CONFIG_GUS
+ifneq ($(CONFIG_GUSHW),Y)
+CONFIG_GUSHW=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_SSCAPEHW),Y)
+CONFIG_SSCAPEHW=y
+endif
+endif
+
+ifdef CONFIG_PAS
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_SB
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_ADLIB
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_GUS
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_MPU401
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_PSS
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_GUS16
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_GUSMAX
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_MSS
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_CS4232
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_MAUI
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_OPL3SA1
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_SOFTOSS
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_YM3812_AUTO
+ifneq ($(CONFIG_SEQUENCER),Y)
+CONFIG_SEQUENCER=y
+endif
+endif
+
+ifdef CONFIG_PAS
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_SB
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_GUS
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_PSS
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_GUS16
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_GUSMAX
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_MSS
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_CS4232
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_OPL3SA1
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_SOFTOSS
+ifneq ($(CONFIG_AUDIO),Y)
+CONFIG_AUDIO=y
+endif
+endif
+
+ifdef CONFIG_PAS
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_SB
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_GUS
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_MPU401
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_PSS
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_GUS16
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_GUSMAX
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_SSCAPE
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_TRIX
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_MAD16
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_CS4232
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_MAUI
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_OPL3SA1
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+
+ifdef CONFIG_SOFTOSS
+ifneq ($(CONFIG_MIDI),Y)
+CONFIG_MIDI=y
+endif
+endif
+

drivers/sound/Makefile

@@ -24,21 +24,9 @@ ifeq ($(ARCH),m68k)
   clean:
 	rm -f core *.o *.a *.s
 
-  # dummy rule to keep 'make xconfig' happy
-  mkscript:
-
-# More dummy targets for make [menu]config
-mkscript:
-kernelconfig:
-
 else
 
-ifeq (.defines,$(wildcard .defines))
-include .defines
-#include .objects
-endif
-
-TARGET_OS=linux
+include Defines
 
 ifndef TOPDIR
 TOPDIR=/usr/src/linux
@@ -92,7 +80,7 @@ else
   ifeq ($(CONFIG_GUS),m)
     M_OBJS += gus.o
   endif
-  ifeq ($(CONFIG_GUSMAX),m)
+  ifeq ($(CONFIG_GUSMAX),y)
     ifneq ($(CONFIG_MSS),y)
       CONFIG_MSS = m
     endif
@@ -259,33 +247,80 @@ sound.o: soundcard.o dev_table.o sound_switch.o audio.o dmabuf.o sequencer.o sys
 gus.o: gus_card.o gus_midi.o gus_vol.o gus_wave.o ics2101.o
 	ld -r -o gus.o gus_card.o gus_midi.o gus_vol.o gus_wave.o ics2101.o
 
-kernelconfig: setup
-	rm -f configure
-	$(HOSTCC) -o configure configure.c
-	./configure fixedlocal > local.h
-	./configure fixeddefines > .defines
-	@echo \#define SOUND_CONFIG_DATE \"`date`\" >> local.h
-	@echo \#define SOUND_CONFIG_BY \"`whoami`\" >> local.h
-#	@echo \#define SOUND_CONFIG_HOST \"`hostname`\" >> local.h 2>/dev/null
-#	@echo \#define SOUND_CONFIG_DOMAIN \"`hostname -d`\" >> local.h 2>/dev/null
-	@echo \#define SOUND_UNAME_A \"`uname -a`\" >> local.h
-
-configure: configure.c
-	$(HOSTCC) -o configure configure.c
-	@cat .blurb
-
-setup:
-	@echo Compiling Sound Driver v $(VERSION) for Linux
-
-mkscript:
-
-config: configure
-	@$(MAKE) setup
-	@./configure > local.h
-	@echo \#define SOUND_CONFIG_DATE \"`date`\" >> local.h
-	@echo \#define SOUND_CONFIG_BY \"`whoami`\" >> local.h
-#	@echo \#define SOUND_CONFIG_HOST \"`hostname`\" >> local.h 2>/dev/null
-#	@echo \#define SOUND_CONFIG_DOMAIN \"`hostname -d`\" >> local.h 2>/dev/null
-	@echo \#define SOUND_UNAME_A \"`uname -a`\" >> local.h
+# Firmware files that need translation
+#
+# The translated files are protected by a file that keeps track
+# of what name was used to build them.  If the name changes, they
+# will be forced to be remade.
+
+bin2hex: bin2hex.c
+	$(HOSTCC) -o bin2hex bin2hex.c
+
+hex2hex: hex2hex.c
+	$(HOSTCC) -o hex2hex hex2hex.c
+
+ifeq ($(MAUI_HAVE_BOOT),y)
+
+MAUI_BOOT_FILE := $(patsubst "%", %, $(MAUI_BOOT_FILE))
+
+maui.o: maui_boot.h
+
+maui_boot.h: $(MAUI_BOOT_FILE) bin2hex
+	bin2hex maui_os < "$(MAUI_BOOT_FILE)" > $@
+	@ ( \
+	    echo 'ifeq ($(strip $(MAUI_BOOT_FILE)),$$(strip $$(MAUI_BOOT_FILE)))'; \
+	    echo 'FILES_BOOT_UP_TO_DATE += $@'; \
+	    echo 'endif' \
+	) > .$@.boot
+
+endif
+
+ifeq ($(PSS_HAVE_BOOT),y)
+
+PSS_BOOT_FILE := $(patsubst "%", %, $(PSS_BOOT_FILE))
+
+pss.o: pss_boot.h
 
+pss_boot.h: $(PSS_BOOT_FILE) bin2hex
+	bin2hex pss_synth < "$(PSS_BOOT_FILE)" > $@
+	@ ( \
+	    echo 'ifeq ($(strip $(PSS_BOOT_FILE)),$$(strip $$(PSS_BOOT_FILE)))'; \
+	    echo 'FILES_BOOT_UP_TO_DATE += $@'; \
+	    echo 'endif' \
+	) > .$@.boot
+
+endif
+
+ifeq ($(TRIX_HAVE_BOOT),y)
+
+TRIX_BOOT_FILE := $(patsubst "%", %, $(TRIX_BOOT_FILE))
+
+trix.o: trix_boot.h
+
+trix_boot.h: $(TRIX_BOOT_FILE) hex2hex
+	hex2hex trix_boot < "$(TRIX_BOOT_FILE)" > $@
+	@ ( \
+	    echo 'ifeq ($(strip $(TRIX_BOOT_FILE)),$$(strip $$(strip $$(TRIX_BOOT_FILE)))'; \
+	    echo 'FILES_BOOT_UP_TO_DATE += $@'; \
+	    echo 'endif' \
+	) > .$@.boot
+
+endif
+
+# Find boot files whose source file names have changed and force rebuild.
+
+FILES_BOOT_UP_TO_DATE :=
+
+FILES_BOOT_EXIST := $(wildcard .*.boot)
+ifneq ($(FILES_BOOT_EXIST),)
+include $(FILES_BOOT_EXIST)
+endif
+
+FILES_BOOT_CHANGED := $(strip \
+    $(filter-out $(FILES_BOOT_UP_TO_DATE), \
+	maui_boot.h pss_boot.h trix_boot.h))
+
+ifneq ($(FILES_BOOT_CHANGED),)
+$(FILES_BOOT_CHANGED): dummy
+endif
 endif

drivers/sound/Readme.cards

@@ -18,32 +18,8 @@ IMPORTANT!	This document covers only cards that were "known" when
 		http://www.opensound.com/ossfree for info about
 		cards introduced recently.
 
-		The following covers mainly the "old" configuration
-		method (make config). Most of it is valid for the "new"
-		configuration (make menuconfig/xconfig) too.
-
-		Cards having some kind of loadable "microcode" such as
-		PSS, SM Wave, AudioTrix Pro and Maui/Tropez must be
-		configured using the old method. The new one will not 
-		work with them. The "old" method is used by default by
-		"make config". "make xconfig" will always use the "new"
-		method. "make menuconfig" will allow you to select which
-		method to use. After you have used the "new" method once
-		it will always be used when you use any of the config
-		programs. To return back to the "old" method you should
-		execute "cp Config.std Config.in" in linux/drivers/sound.
-
-		The /etc/soundconf file (forget it if you don't know what
-		this file does) contains settings that are used only by
-		the "old" method. Don't ever think the "active" settings
-		are stored there (they really are _NOT_ stored
-		there). Don't try to edit /etc/soundconf or any other
-		kernel or sound driver config files manually. The _only_
-		proper ways to change the settings are make config or
-		make menuconfig (the "old" method).
-
-		When using make xconfig and/or make menuconfig, you should
-		carefully check each sound configuration option (particularly
+		When configuring the sound driver, you should carefully
+		check each sound configuration option (particularly
 		"Support for /dev/dsp and /dev/audio"). The default values
 		offered by these programs are not necessarily valid.
 
@@ -377,9 +353,6 @@ MediaTrix AudioTrix Pro
 	chips. The OPL4 mode is supported by a microcontroller running a
 	General MIDI emulator. There is also a SB 1.5 compatible playback mode.
 
-	NOTE! You will have to use the "old" config script when configuring
-	AudioTrix Pro.
-
 Ensoniq SoundScape and compatibles
 	Ensoniq has designed a soundcard architecture based on the
 	OTTO synthesizer chip used in their professional MIDI synthesizers.
@@ -411,8 +384,8 @@ OPTi MAD16 and Mozart based cards
 Audio Excel DSP16 
 	Support for this card was written by Riccardo Faccetti
 	(riccardo@cdc8g5.cdc.polimi.it). The AEDSP16 driver included in
-	the lowlevel/ directory. To use it you should use the "new" config
-	script and to enable the "Additional low level drivers" option.
+	the lowlevel/ directory. To use it you should enable the
+	"Additional low level drivers" option.
 
 Crystal CS4232 and CS4236 based cards such as AcerMagic S23, TB Tropez _Plus_ and 
 	many PC motherboards (Compaq, HP, Intel, ...)
@@ -431,8 +404,6 @@ Turtle Beach Maui and Tropez "classic"
 	described in the Maui/Tropez User's manual. 
 	There is now full initialization support too. The audio side of
 	the Tropez is based on the MAD16 chip (see above).
-	NOTE! You will have to use the "old" config script when configuring
-	Maui or Tropez.
 	NOTE! Tropez Plus is different card than Tropez "classic" and will not
 	work fully in Linux. You can get audio features working by configuring
 	the card as a CS4232 based card (above).
@@ -529,29 +500,20 @@ the kernel following instructions in the kernel README.
 The sound driver configuration dialog
 -------------------------------------
 
-All config information of the sound driver is written to file 
-linux/drivers/sound/local.h. You may save the old version is this file and
-use it again in case you want to use the same config later. In this case
-just answer n to each question made by the sound config program and put
-the original local.h back before running "make dep".
-Don't do this if the version number of the sound driver has changed. In this
-case you have to enter the configuration information again.
-
 If you already have the sound driver installed, consult printout of
 "cat /dev/sndstat" when configuring the driver again. It gives the I/O,
 IRQ and DMA settings you have used earlier.
 
-
-The sound config program (linux/drivers/sound/configure) starts by making
-some yes/no questions. Be careful when answering to these questions since
-answering y to a question may prevent some later ones from being asked. For
-example don't answer y to the first question (PAS16) if you don't really
-have a PAS16. Don't enable more cards than you really need since they
-just consume memory. Also some drivers (like MPU401) may conflict with your
-SCSI controller and prevent kernel from booting. If you card was in the list
-of supported cards (above), please look at the card specific config 
-instructions (later in this file) before starting to configure. Some cards
-must be configured in way which is not obvious.
+Sound configuration starts by making some yes/no questions. Be careful
+when answering to these questions since answering y to a question may
+prevent some later ones from being asked. For example don't answer y to
+the first question (PAS16) if you don't really have a PAS16. Don't enable
+more cards than you really need since they just consume memory. Also
+some drivers (like MPU401) may conflict with your SCSI controller and
+prevent kernel from booting. If you card was in the list of supported
+cards (above), please look at the card specific config instructions
+(later in this file) before starting to configure. Some cards must be
+configured in way which is not obvious.
 
 So here is the beginning of the config dialog. Answer 'y' or 'n' to these
 questions. The default answer is shown so that (y/n) means 'y' by default and
@@ -688,9 +650,7 @@ card specific configuration information. Usually just a set of
 I/O address, IRQ and DMA numbers are asked. With some cards the program
 asks for some files to be used during initialization of the card. For example
 many cards have a DSP chip or microprocessor which must be initialized by
-downloading a program (microcode) file to the card. In some cases this file
-is written to a .h file by the config program and then included to the driver
-during compile.
+downloading a program (microcode) file to the card.
 
 Instructions for answering these questions are given in the next section.
 
@@ -1041,9 +1001,6 @@ specific section for instructions about configuring more than one MPU401 cards.
 Logitech Soundman Wave
 ----------------------
 
-NOTE! You will have to use the "old" config script when configuring
-      SM Wave.
-
 Read the above MV Jazz specific instructions first.
 
 The Logitech SoundMan Wave (don't confuse with the SM16 or SM Games) is

drivers/sound/bin2hex.c

+#include <stdio.h>
+
+int main( int argc, const char * argv [] )
+{
+    const char * varname = argv[1];
+    int i = 0;
+    int c;
+
+    printf( "/* automatically generated by bin2hex */\n" );
+    printf( "static unsigned char %s [] =\n{\n", varname );
+
+    while ( ( c = getchar( ) ) != EOF )
+    {
+	if ( i != 0 && i % 10 == 0 )
+	    printf( "\n" );
+	printf( "0x%02lx,", c & 0xFFl );
+	i++;
+    }
+
+    printf( "};\n#define %sLen %d\n", varname, i );
+    return 0;
+}

drivers/sound/dev_table.h

@@ -15,6 +15,7 @@
 #ifndef _DEV_TABLE_H_
 #define _DEV_TABLE_H_
 
+#include <linux/config.h>
 
 /*
  * Sound card numbers 27 to 999. (1 to 26 are defined in soundcard.h)

drivers/sound/hex2hex.h → drivers/sound/hex2hex.c

 /*
- * This file is a part of configure.c
- *
- * hex2hex reads an input file in Intel HEX format and produces
- * an (unsigned char) array which contains the bytes and writes it to the
- * output file using C syntax
+ * hex2hex reads stdin in Intel HEX format and produces an
+ * (unsigned char) array which contains the bytes and writes it
+ * to stdout using C syntax
  */
 
+#include <stdio.h>
+#include <stdlib.h>
+
+#define ABANDON(why) { fprintf(stderr, "%s\n", why); exit(1); }
 #define MAX_SIZE (256*1024)
-#define ABANDON(why) { \
-		fprintf(stderr, "%s: " why "\n", source); \
-		return 0; \
-		}
+unsigned char buf[MAX_SIZE];
 
-int loadhex(FILE *inf, unsigned char *buf, char *source)
+int loadhex(FILE *inf, unsigned char *buf)
 {
 	int l=0, c, i;
 
@@ -65,48 +64,24 @@ int loadhex(FILE *inf, unsigned char *buf, char *source)
 	return l;
 }
 
-int hex2hex(char *source, char *target, char *varline)
+int main( int argc, const char * argv [] )
 {
-	FILE *inf, *outf;
-
+	const char * varline = argv[1];
 	int i,l;
-	unsigned char buf[MAX_SIZE];
-
-	if ((inf=fopen(source, "r"))==NULL)
-	{
-		perror(source);
-		return 0;
-	}
-
-	if ((outf=fopen(target, "w"))==NULL)
-	{
-		perror(target);
-		fclose(inf);
-		return 0;
-	}
-
-	l=loadhex(inf, buf, source);
-	if (l<=0)
-        {
-           fclose(inf);
-	   fclose(outf);
-	   return l;
-	}
 
+	l = loadhex(stdin, buf);
 
-	fprintf(outf, "/*\n *\t Computer generated file. Do not edit.\n */\n");
-        fprintf(outf, "static int %s_len = %d;\n", varline, l);
-	fprintf(outf, "static unsigned char %s[] = {\n", varline);
+	printf("/*\n *\t Computer generated file. Do not edit.\n */\n");
+        printf("static int %s_len = %d;\n", varline, l);
+	printf("static unsigned char %s[] = {\n", varline);
 
 	for (i=0;i<l;i++)
 	{
-		if (i) fprintf(outf, ",");
-		if (i && !(i % 16)) fprintf(outf, "\n");
-		fprintf(outf, "0x%02x", buf[i]);
+		if (i) printf(",");
+		if (i && !(i % 16)) printf("\n");
+		printf("0x%02x", buf[i]);
 	}
 
-	fprintf(outf, "\n};\n\n");
-	fclose(inf);
-	fclose(outf);
-	return 1;
+	printf("\n};\n\n");
+	return 0;
 }

drivers/sound/local.h.master

 /* Computer generated file. Please don't edit! */
 
+#include <linux/config.h>
+
 #define KERNEL_COMPATIBLE_CONFIG
 
 #define SELECTED_SOUND_OPTIONS	0x00000000

drivers/sound/maui.c

@@ -41,12 +41,11 @@ static int     *maui_osp;
 static int      (*orig_load_patch) (int dev, int format, const char *addr,
 			      int offs, int count, int pmgr_flag) = NULL;
 
-#ifdef HAVE_MAUI_BOOT
+#ifdef MAUI_HAVE_BOOT
 #include "maui_boot.h"
 #else
 static unsigned char *maui_os = NULL;
-static int      maui_osLen = 0;
-
+static int maui_osLen = 0;
 #endif
 
 static struct wait_queue *maui_sleeper = NULL;

drivers/sound/opl3.c

@@ -1204,7 +1204,6 @@ void cleanup_module(void)
 {
 	if (devc)
 	{
-		vfree(devc);
 		devc = NULL;
 		sound_unload_synthdev(me);
 	}

drivers/sound/pss.c

@@ -51,13 +51,11 @@
 
 #include "coproc.h"
 
-#ifdef PSS_HAVE_LD
-#include "synth-ld.h"
+#ifdef PSS_HAVE_BOOT
+#include "pss_boot.h"
 #else
-static int      pss_synthLen = 0;
-static unsigned char *pss_synth =
-NULL;
-
+static unsigned char *pss_synth = NULL;
+static int pss_synthLen = 0;
 #endif
 
 typedef struct pss_confdata