Commit 3d7a6db5 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes for recent regressions (PCI/ACPI resources and at91
  RTC locking), a stable-candidate powercap RAPL driver fix and two ARM
  cpuidle fixes (one stable-candidate too).

  Specifics:

   - Revert a recent PCI commit related to IRQ resources management that
     introduced a regression for drivers attempting to bind to devices
     whose previous drivers did not balance pci_enable_device() and
     pci_disable_device() as expected (Rafael J Wysocki).

   - Fix a deadlock in at91_rtc_interrupt() introduced by a typo in a
     recent commit related to wakeup interrupt handling (Dan Carpenter).

   - Allow the power capping RAPL (Running-Average Power Limit) driver
     to use different energy units for domains within one CPU package
     which is necessary to handle Intel Haswell EP processors correctly
     (Jacob Pan).

   - Improve the cpuidle mvebu driver's handling of Armada XP SoCs by
     updating the target residency and exit latency numbers for those
     chips (Sebastien Rannou).

   - Prevent the cpuidle mvebu driver from calling cpu_pm_enter() twice
     in a row before cpu_pm_exit() is called on the same CPU which
     breaks the core's assumptions regarding the usage of those
     functions (Gregory Clement)"

* tag 'pm+acpi-4.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "x86/PCI: Refine the way to release PCI IRQ resources"
  rtc: at91rm9200: double locking bug in at91_rtc_interrupt()
  powercap / RAPL: handle domains with different energy units
  cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
  cpuidle: mvebu: Fix the CPU PM notifier usage
parents 97448d5b 9c86286a
......@@ -93,6 +93,8 @@ extern raw_spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
extern bool mp_should_keep_irq(struct device *dev);
struct pci_raw_ops {
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val);
......
......@@ -513,31 +513,6 @@ void __init pcibios_set_cache_line_size(void)
}
}
/*
* Some device drivers assume dev->irq won't change after calling
* pci_disable_device(). So delay releasing of IRQ resource to driver
* unbinding time. Otherwise it will break PM subsystem and drivers
* like xen-pciback etc.
*/
static int pci_irq_notifier(struct notifier_block *nb, unsigned long action,
void *data)
{
struct pci_dev *dev = to_pci_dev(data);
if (action != BUS_NOTIFY_UNBOUND_DRIVER)
return NOTIFY_DONE;
if (pcibios_disable_irq)
pcibios_disable_irq(dev);
return NOTIFY_OK;
}
static struct notifier_block pci_irq_nb = {
.notifier_call = pci_irq_notifier,
.priority = INT_MIN,
};
int __init pcibios_init(void)
{
if (!raw_pci_ops) {
......@@ -550,9 +525,6 @@ int __init pcibios_init(void)
if (pci_bf_sort >= pci_force_bf)
pci_sort_breadthfirst();
bus_register_notifier(&pci_bus_type, &pci_irq_nb);
return 0;
}
......@@ -711,6 +683,12 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return 0;
}
void pcibios_disable_device (struct pci_dev *dev)
{
if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
int pci_ext_cfg_avail(void)
{
if (raw_pci_ext_ops)
......
......@@ -234,10 +234,10 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
if (dev->irq_managed && dev->irq > 0) {
if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
dev->irq > 0) {
mp_unmap_irq(dev->irq);
dev->irq_managed = 0;
dev->irq = 0;
}
}
......
......@@ -1256,9 +1256,22 @@ static int pirq_enable_irq(struct pci_dev *dev)
return 0;
}
bool mp_should_keep_irq(struct device *dev)
{
if (dev->power.is_prepared)
return true;
#ifdef CONFIG_PM
if (dev->power.runtime_status == RPM_SUSPENDING)
return true;
#endif
return false;
}
static void pirq_disable_irq(struct pci_dev *dev)
{
if (io_apic_assign_pci_irqs && dev->irq_managed && dev->irq) {
if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
dev->irq_managed && dev->irq) {
mp_unmap_irq(dev->irq);
dev->irq = 0;
dev->irq_managed = 0;
......
......@@ -485,6 +485,14 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (!pin || !dev->irq_managed || dev->irq <= 0)
return;
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
#ifdef CONFIG_PM
if (dev->dev.power.runtime_status == RPM_SUSPENDING)
return;
#endif
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
return;
......@@ -505,6 +513,5 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (gsi >= 0) {
acpi_unregister_gsi(gsi);
dev->irq_managed = 0;
dev->irq = 0;
}
}
......@@ -37,11 +37,11 @@ static int mvebu_v7_enter_idle(struct cpuidle_device *dev,
deepidle = true;
ret = mvebu_v7_cpu_suspend(deepidle);
cpu_pm_exit();
if (ret)
return ret;
cpu_pm_exit();
return index;
}
......@@ -50,17 +50,17 @@ static struct cpuidle_driver armadaxp_idle_driver = {
.states[0] = ARM_CPUIDLE_WFI_STATE,
.states[1] = {
.enter = mvebu_v7_enter_idle,
.exit_latency = 10,
.exit_latency = 100,
.power_usage = 50,
.target_residency = 100,
.target_residency = 1000,
.name = "MV CPU IDLE",
.desc = "CPU power down",
},
.states[2] = {
.enter = mvebu_v7_enter_idle,
.exit_latency = 100,
.exit_latency = 1000,
.power_usage = 5,
.target_residency = 1000,
.target_residency = 10000,
.flags = MVEBU_V7_FLAG_DEEP_IDLE,
.name = "MV CPU DEEP IDLE",
.desc = "CPU and L2 Fabric power down",
......
......@@ -73,7 +73,7 @@
#define TIME_WINDOW_MAX_MSEC 40000
#define TIME_WINDOW_MIN_MSEC 250
#define ENERGY_UNIT_SCALE 1000 /* scale from driver unit to powercap unit */
enum unit_type {
ARBITRARY_UNIT, /* no translation */
POWER_UNIT,
......@@ -158,6 +158,7 @@ struct rapl_domain {
struct rapl_power_limit rpl[NR_POWER_LIMITS];
u64 attr_map; /* track capabilities */
unsigned int state;
unsigned int domain_energy_unit;
int package_id;
};
#define power_zone_to_rapl_domain(_zone) \
......@@ -190,6 +191,7 @@ struct rapl_defaults {
void (*set_floor_freq)(struct rapl_domain *rd, bool mode);
u64 (*compute_time_window)(struct rapl_package *rp, u64 val,
bool to_raw);
unsigned int dram_domain_energy_unit;
};
static struct rapl_defaults *rapl_defaults;
......@@ -227,7 +229,8 @@ static int rapl_read_data_raw(struct rapl_domain *rd,
static int rapl_write_data_raw(struct rapl_domain *rd,
enum rapl_primitives prim,
unsigned long long value);
static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
static u64 rapl_unit_xlate(struct rapl_domain *rd, int package,
enum unit_type type, u64 value,
int to_raw);
static void package_power_limit_irq_save(int package_id);
......@@ -305,7 +308,9 @@ static int get_energy_counter(struct powercap_zone *power_zone, u64 *energy_raw)
static int get_max_energy_counter(struct powercap_zone *pcd_dev, u64 *energy)
{
*energy = rapl_unit_xlate(0, ENERGY_UNIT, ENERGY_STATUS_MASK, 0);
struct rapl_domain *rd = power_zone_to_rapl_domain(pcd_dev);
*energy = rapl_unit_xlate(rd, 0, ENERGY_UNIT, ENERGY_STATUS_MASK, 0);
return 0;
}
......@@ -639,6 +644,11 @@ static void rapl_init_domains(struct rapl_package *rp)
rd->msrs[4] = MSR_DRAM_POWER_INFO;
rd->rpl[0].prim_id = PL1_ENABLE;
rd->rpl[0].name = pl1_name;
rd->domain_energy_unit =
rapl_defaults->dram_domain_energy_unit;
if (rd->domain_energy_unit)
pr_info("DRAM domain energy unit %dpj\n",
rd->domain_energy_unit);
break;
}
if (mask) {
......@@ -648,11 +658,13 @@ static void rapl_init_domains(struct rapl_package *rp)
}
}
static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
static u64 rapl_unit_xlate(struct rapl_domain *rd, int package,
enum unit_type type, u64 value,
int to_raw)
{
u64 units = 1;
struct rapl_package *rp;
u64 scale = 1;
rp = find_package_by_id(package);
if (!rp)
......@@ -663,7 +675,12 @@ static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
units = rp->power_unit;
break;
case ENERGY_UNIT:
units = rp->energy_unit;
scale = ENERGY_UNIT_SCALE;
/* per domain unit takes precedence */
if (rd && rd->domain_energy_unit)
units = rd->domain_energy_unit;
else
units = rp->energy_unit;
break;
case TIME_UNIT:
return rapl_defaults->compute_time_window(rp, value, to_raw);
......@@ -673,11 +690,11 @@ static u64 rapl_unit_xlate(int package, enum unit_type type, u64 value,
};
if (to_raw)
return div64_u64(value, units);
return div64_u64(value, units) * scale;
value *= units;
return value;
return div64_u64(value, scale);
}
/* in the order of enum rapl_primitives */
......@@ -773,7 +790,7 @@ static int rapl_read_data_raw(struct rapl_domain *rd,
final = value & rp->mask;
final = final >> rp->shift;
if (xlate)
*data = rapl_unit_xlate(rd->package_id, rp->unit, final, 0);
*data = rapl_unit_xlate(rd, rd->package_id, rp->unit, final, 0);
else
*data = final;
......@@ -799,7 +816,7 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
"failed to read msr 0x%x on cpu %d\n", msr, cpu);
return -EIO;
}
value = rapl_unit_xlate(rd->package_id, rp->unit, value, 1);
value = rapl_unit_xlate(rd, rd->package_id, rp->unit, value, 1);
msr_val &= ~rp->mask;
msr_val |= value << rp->shift;
if (wrmsrl_safe_on_cpu(cpu, msr, msr_val)) {
......@@ -818,7 +835,7 @@ static int rapl_write_data_raw(struct rapl_domain *rd,
* calculate units differ on different CPUs.
* We convert the units to below format based on CPUs.
* i.e.
* energy unit: microJoules : Represented in microJoules by default
* energy unit: picoJoules : Represented in picoJoules by default
* power unit : microWatts : Represented in milliWatts by default
* time unit : microseconds: Represented in seconds by default
*/
......@@ -834,7 +851,7 @@ static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
}
value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
rp->energy_unit = 1000000 / (1 << value);
rp->energy_unit = ENERGY_UNIT_SCALE * 1000000 / (1 << value);
value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
rp->power_unit = 1000000 / (1 << value);
......@@ -842,7 +859,7 @@ static int rapl_check_unit_core(struct rapl_package *rp, int cpu)
value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
rp->time_unit = 1000000 / (1 << value);
pr_debug("Core CPU package %d energy=%duJ, time=%dus, power=%duW\n",
pr_debug("Core CPU package %d energy=%dpJ, time=%dus, power=%duW\n",
rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
return 0;
......@@ -859,7 +876,7 @@ static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
return -ENODEV;
}
value = (msr_val & ENERGY_UNIT_MASK) >> ENERGY_UNIT_OFFSET;
rp->energy_unit = 1 << value;
rp->energy_unit = ENERGY_UNIT_SCALE * 1 << value;
value = (msr_val & POWER_UNIT_MASK) >> POWER_UNIT_OFFSET;
rp->power_unit = (1 << value) * 1000;
......@@ -867,7 +884,7 @@ static int rapl_check_unit_atom(struct rapl_package *rp, int cpu)
value = (msr_val & TIME_UNIT_MASK) >> TIME_UNIT_OFFSET;
rp->time_unit = 1000000 / (1 << value);
pr_debug("Atom package %d energy=%duJ, time=%dus, power=%duW\n",
pr_debug("Atom package %d energy=%dpJ, time=%dus, power=%duW\n",
rp->id, rp->energy_unit, rp->time_unit, rp->power_unit);
return 0;
......@@ -1017,6 +1034,13 @@ static const struct rapl_defaults rapl_defaults_core = {
.compute_time_window = rapl_compute_time_window_core,
};
static const struct rapl_defaults rapl_defaults_hsw_server = {
.check_unit = rapl_check_unit_core,
.set_floor_freq = set_floor_freq_default,
.compute_time_window = rapl_compute_time_window_core,
.dram_domain_energy_unit = 15300,
};
static const struct rapl_defaults rapl_defaults_atom = {
.check_unit = rapl_check_unit_atom,
.set_floor_freq = set_floor_freq_atom,
......@@ -1037,7 +1061,7 @@ static const struct x86_cpu_id rapl_ids[] = {
RAPL_CPU(0x3a, rapl_defaults_core),/* Ivy Bridge */
RAPL_CPU(0x3c, rapl_defaults_core),/* Haswell */
RAPL_CPU(0x3d, rapl_defaults_core),/* Broadwell */
RAPL_CPU(0x3f, rapl_defaults_core),/* Haswell */
RAPL_CPU(0x3f, rapl_defaults_hsw_server),/* Haswell servers */
RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */
RAPL_CPU(0x4C, rapl_defaults_atom),/* Braswell */
RAPL_CPU(0x4A, rapl_defaults_atom),/* Tangier */
......
......@@ -324,7 +324,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
ret = IRQ_HANDLED;
}
spin_lock(&suspended_lock);
spin_unlock(&suspended_lock);
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment