Commit 3d7a8278 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Revert "pcmcia: add a new resource manager for non ISA systems"

This reverts commit 02b03846.

Alan writes:
it seems there is a regression in there for some configuration of I/O
based devices. I'll take a look at it over the next couple of kernel
releases and see what is up then resubmit it with fixes.
Reported-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 05c00067
......@@ -69,8 +69,7 @@ config YENTA
tristate "CardBus yenta-compatible bridge support"
depends on PCI
select CARDBUS if !EXPERT
select PCCARD_NONSTATIC if PCMCIA != n && ISA
select PCCARD_PCI if PCMCIA !=n && !ISA
select PCCARD_NONSTATIC if PCMCIA != n
---help---
This option enables support for CardBus host bridges. Virtually
all modern PCMCIA bridges are CardBus compatible. A "bridge" is
......@@ -110,8 +109,7 @@ config YENTA_TOSHIBA
config PD6729
tristate "Cirrus PD6729 compatible bridge support"
depends on PCMCIA && PCI
select PCCARD_NONSTATIC if PCMCIA != n && ISA
select PCCARD_PCI if PCMCIA !=n && !ISA
select PCCARD_NONSTATIC
help
This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
device, found in some older laptops and PCMCIA card readers.
......@@ -119,8 +117,7 @@ config PD6729
config I82092
tristate "i82092 compatible bridge support"
depends on PCMCIA && PCI
select PCCARD_NONSTATIC if PCMCIA != n && ISA
select PCCARD_PCI if PCMCIA !=n && !ISA
select PCCARD_NONSTATIC
help
This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
found in some older laptops and more commonly in evaluation boards for the
......@@ -291,9 +288,6 @@ config ELECTRA_CF
Say Y here to support the CompactFlash controller on the
PA Semi Electra eval board.
config PCCARD_PCI
bool
config PCCARD_NONSTATIC
bool
......
......@@ -12,7 +12,6 @@ obj-$(CONFIG_PCMCIA) += pcmcia.o
pcmcia_rsrc-y += rsrc_mgr.o
pcmcia_rsrc-$(CONFIG_PCCARD_NONSTATIC) += rsrc_nonstatic.o
pcmcia_rsrc-$(CONFIG_PCCARD_IODYN) += rsrc_iodyn.o
pcmcia_rsrc-$(CONFIG_PCCARD_PCI) += rsrc_pci.o
obj-$(CONFIG_PCCARD) += pcmcia_rsrc.o
......
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <pcmcia/ss.h>
#include <pcmcia/cistpl.h>
#include "cs_internal.h"
struct pcmcia_align_data {
unsigned long mask;
unsigned long offset;
};
static resource_size_t pcmcia_align(void *align_data,
const struct resource *res,
resource_size_t size, resource_size_t align)
{
struct pcmcia_align_data *data = align_data;
resource_size_t start;
start = (res->start & ~data->mask) + data->offset;
if (start < res->start)
start += data->mask + 1;
return start;
}
static struct resource *find_io_region(struct pcmcia_socket *s,
unsigned long base, int num,
unsigned long align)
{
struct resource *res = pcmcia_make_resource(0, num, IORESOURCE_IO,
dev_name(&s->dev));
struct pcmcia_align_data data;
int ret;
data.mask = align - 1;
data.offset = base & data.mask;
ret = pci_bus_alloc_resource(s->cb_dev->bus, res, num, 1,
base, 0, pcmcia_align, &data);
if (ret != 0) {
kfree(res);
res = NULL;
}
return res;
}
static int res_pci_find_io(struct pcmcia_socket *s, unsigned int attr,
unsigned int *base, unsigned int num,
unsigned int align, struct resource **parent)
{
int i, ret = 0;
/* Check for an already-allocated window that must conflict with
* what was asked for. It is a hack because it does not catch all
* potential conflicts, just the most obvious ones.
*/
for (i = 0; i < MAX_IO_WIN; i++) {
if (!s->io[i].res)
continue;
if (!*base)
continue;
if ((s->io[i].res->start & (align-1)) == *base)
return -EBUSY;
}
for (i = 0; i < MAX_IO_WIN; i++) {
struct resource *res = s->io[i].res;
unsigned int try;
if (res && (res->flags & IORESOURCE_BITS) !=
(attr & IORESOURCE_BITS))
continue;
if (!res) {
if (align == 0)
align = 0x10000;
res = s->io[i].res = find_io_region(s, *base, num,
align);
if (!res)
return -EINVAL;
*base = res->start;
s->io[i].res->flags =
((res->flags & ~IORESOURCE_BITS) |
(attr & IORESOURCE_BITS));
s->io[i].InUse = num;
*parent = res;
return 0;
}
/* Try to extend top of window */
try = res->end + 1;
if ((*base == 0) || (*base == try)) {
ret = adjust_resource(s->io[i].res, res->start,
resource_size(res) + num);
if (ret)
continue;
*base = try;
s->io[i].InUse += num;
*parent = res;
return 0;
}
/* Try to extend bottom of window */
try = res->start - num;
if ((*base == 0) || (*base == try)) {
ret = adjust_resource(s->io[i].res,
res->start - num,
resource_size(res) + num);
if (ret)
continue;
*base = try;
s->io[i].InUse += num;
*parent = res;
return 0;
}
}
return -EINVAL;
}
static struct resource *res_pci_find_mem(u_long base, u_long num,
u_long align, int low, struct pcmcia_socket *s)
{
struct resource *res = pcmcia_make_resource(0, num, IORESOURCE_MEM,
dev_name(&s->dev));
struct pcmcia_align_data data;
unsigned long min;
int ret;
if (align < 0x20000)
align = 0x20000;
data.mask = align - 1;
data.offset = base & data.mask;
min = 0;
if (!low)
min = 0x100000UL;
ret = pci_bus_alloc_resource(s->cb_dev->bus,
res, num, 1, min, 0,
pcmcia_align, &data);
if (ret != 0) {
kfree(res);
res = NULL;
}
return res;
}
static int res_pci_init(struct pcmcia_socket *s)
{
if (!s->cb_dev || (!s->features & SS_CAP_PAGE_REGS)) {
dev_err(&s->dev, "not supported by res_pci\n");
return -EOPNOTSUPP;
}
return 0;
}
struct pccard_resource_ops pccard_nonstatic_ops = {
.validate_mem = NULL,
.find_io = res_pci_find_io,
.find_mem = res_pci_find_mem,
.init = res_pci_init,
.exit = NULL,
};
EXPORT_SYMBOL(pccard_nonstatic_ops);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment