Commit 3d8387ef authored by Huang Ying's avatar Huang Ying Committed by Bjorn Helgaas

PCI/PM: Fix config reg access for D3cold and bridge suspending

This patch fixes the following bug:

http://marc.info/?l=linux-pci&m=134338059022620&w=2

Where lspci does not work properly if a device and the corresponding
parent bridge (such as PCIe port) is suspended.  This is because the
device configuration space registers will be not accessible if the
corresponding parent bridge is suspended or the device is put into
D3cold state.

To solve the issue, the bridge/PCIe port connected to the device is
put into active state before read/write configuration space registers.
If the device is in D3cold state, it will be put into active state
too.

To avoid resume/suspend PCIe port for each configuration register
read/write, a small delay is added before the PCIe port to go
suspended.
Reported-by: default avatarBjorn Mork <bjorn@mork.no>
Signed-off-by: default avatarHuang Ying <ying.huang@intel.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: default avatarRafael J. Wysocki <rjw@sisk.pl>
parent ea8c88f1
......@@ -458,6 +458,40 @@ boot_vga_show(struct device *dev, struct device_attribute *attr, char *buf)
}
struct device_attribute vga_attr = __ATTR_RO(boot_vga);
static void
pci_config_pm_runtime_get(struct pci_dev *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;
if (parent)
pm_runtime_get_sync(parent);
pm_runtime_get_noresume(dev);
/*
* pdev->current_state is set to PCI_D3cold during suspending,
* so wait until suspending completes
*/
pm_runtime_barrier(dev);
/*
* Only need to resume devices in D3cold, because config
* registers are still accessible for devices suspended but
* not in D3cold.
*/
if (pdev->current_state == PCI_D3cold)
pm_runtime_resume(dev);
}
static void
pci_config_pm_runtime_put(struct pci_dev *pdev)
{
struct device *dev = &pdev->dev;
struct device *parent = dev->parent;
pm_runtime_put(dev);
if (parent)
pm_runtime_put_sync(parent);
}
static ssize_t
pci_read_config(struct file *filp, struct kobject *kobj,
struct bin_attribute *bin_attr,
......@@ -484,6 +518,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
size = count;
}
pci_config_pm_runtime_get(dev);
if ((off & 1) && size) {
u8 val;
pci_user_read_config_byte(dev, off, &val);
......@@ -529,6 +565,8 @@ pci_read_config(struct file *filp, struct kobject *kobj,
--size;
}
pci_config_pm_runtime_put(dev);
return count;
}
......@@ -549,6 +587,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
count = size;
}
pci_config_pm_runtime_get(dev);
if ((off & 1) && size) {
pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
......@@ -587,6 +627,8 @@ pci_write_config(struct file* filp, struct kobject *kobj,
--size;
}
pci_config_pm_runtime_put(dev);
return count;
}
......
......@@ -140,9 +140,17 @@ static int pcie_port_runtime_resume(struct device *dev)
{
return 0;
}
static int pcie_port_runtime_idle(struct device *dev)
{
/* Delay for a short while to prevent too frequent suspend/resume */
pm_schedule_suspend(dev, 10);
return -EBUSY;
}
#else
#define pcie_port_runtime_suspend NULL
#define pcie_port_runtime_resume NULL
#define pcie_port_runtime_idle NULL
#endif
static const struct dev_pm_ops pcie_portdrv_pm_ops = {
......@@ -155,6 +163,7 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
.resume_noirq = pcie_port_resume_noirq,
.runtime_suspend = pcie_port_runtime_suspend,
.runtime_resume = pcie_port_runtime_resume,
.runtime_idle = pcie_port_runtime_idle,
};
#define PCIE_PORTDRV_PM_OPS (&pcie_portdrv_pm_ops)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment