Merge tag 'for-v3.13-rc/hwmod-fixes-a' of...

Merge tag 'for-v3.13-rc/hwmod-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes

From Paul Walmsley:
ARM: OMAP2+: hwmod code/data: fixes for v3.13-rc

Fix a few hwmod code problems involving recovery with bad data and bad
IP block OCP reset handling.  Also, fix the hwmod data to enable IP
block OCP reset for the OMAP USBHOST devices on OMAP3+.

Basic build, boot, and PM tests are available here:

http://www.pwsan.com/omap/testlogs/prcm_fixes_a_v3.13-rc/20131209030611/

* tag 'for-v3.13-rc/hwmod-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
  ARM: OMAP2+: hwmod: Fix usage of invalid iclk / oclk when clock node is not present
  ARM: OMAP3: hwmod data: Don't prevent RESET of USB Host module
  ARM: OMAP2+: hwmod: Fix SOFTRESET logic
  ARM: OMAP4+: hwmod data: Don't prevent RESET of USB Host module
Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/mach-omap2/omap_hwmod.c

@@ -399,7 +399,7 @@ static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
 }
 
 /**
- * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
+ * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
  * @oh: struct omap_hwmod *
  * @v: pointer to register contents to modify
  *
@@ -426,6 +426,36 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
+ * @oh: struct omap_hwmod *
+ * @v: pointer to register contents to modify
+ *
+ * Clear the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
+{
+	u32 softrst_mask;
+
+	if (!oh->class->sysc ||
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
+		return -EINVAL;
+
+	if (!oh->class->sysc->sysc_fields) {
+		WARN(1,
+		     "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
+		     oh->name);
+		return -EINVAL;
+	}
+
+	softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
+
+	*v &= ~softrst_mask;
+
+	return 0;
+}
+
 /**
  * _wait_softreset_complete - wait for an OCP softreset to complete
  * @oh: struct omap_hwmod * to wait on
@@ -785,6 +815,7 @@ static int _init_interface_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
 				   oh->name, os->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		os->_clk = c;
 		/*
@@ -821,6 +852,7 @@ static int _init_opt_clks(struct omap_hwmod *oh)
 			pr_warning("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
 				   oh->name, oc->clk);
 			ret = -EINVAL;
+			continue;
 		}
 		oc->_clk = c;
 		/*
@@ -1911,6 +1943,12 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	ret = _set_softreset(oh, &v);
 	if (ret)
 		goto dis_opt_clks;
+
+	_write_sysconfig(v, oh);
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
+
 	_write_sysconfig(v, oh);
 
 	if (oh->class->sysc->srst_udelay)
@@ -3227,6 +3265,11 @@ int omap_hwmod_softreset(struct omap_hwmod *oh)
 		goto error;
 	_write_sysconfig(v, oh);
 
+	ret = _clear_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
 error:
 	return ret;
 }

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -1943,7 +1943,8 @@ static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
+			   SYSS_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type1,
@@ -2021,15 +2022,7 @@ static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2937,7 +2937,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
 	.sysc_offs	= 0x0010,
 	.syss_offs	= 0x0014,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -3001,15 +3001,7 @@ static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 };
 
 /*

arch/arm/mach-omap2/omap_hwmod_54xx_data.c

@@ -1544,7 +1544,8 @@ static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_RESET_STATUS),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
 			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
 			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
@@ -1598,15 +1599,7 @@ static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
 	 * hence HWMOD_SWSUP_MSTANDBY
 	 */
 
-	/*
-	 * During system boot; If the hwmod framework resets the module
-	 * the module will have smart idle settings; which can lead to deadlock
-	 * (above Errata Id:i660); so, dont reset the module during boot;
-	 * Use HWMOD_INIT_NO_RESET.
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
-			  HWMOD_INIT_NO_RESET,
+	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
 	.main_clk	= "l3init_60m_fclk",
 	.prcm = {
 		.omap4 = {