Commit 3e87599b authored by Rob Clark's avatar Rob Clark

drm/msm/mdp4: add LVDS panel support

LVDS panel support uses the LCDC (parallel) encoder.  Unlike with HDMI,
there is not a separate LVDS block, so no need to split things into a
bridge+connector.  Nor is there is anything re-used with mdp5.

Note that there can be some regulators shared between HDMI and LVDS (in
particular, on apq8064, ext_3v3p), so we should not use the _exclusive()
variants of devm_regulator_get().

The drm_panel framework is used for panel-specific driver.
Signed-off-by: default avatarRob Clark <robdclark@gmail.com>
parent d65bd0e4
......@@ -4,6 +4,7 @@ config DRM_MSM
depends on DRM
depends on ARCH_QCOM || (ARM && COMPILE_TEST)
select DRM_KMS_HELPER
select DRM_PANEL
select SHMEM
select TMPFS
default y
......
......@@ -18,6 +18,8 @@ msm-y := \
mdp/mdp_kms.o \
mdp/mdp4/mdp4_crtc.o \
mdp/mdp4/mdp4_dtv_encoder.o \
mdp/mdp4/mdp4_lcdc_encoder.o \
mdp/mdp4/mdp4_lvds_connector.o \
mdp/mdp4/mdp4_irq.o \
mdp/mdp4/mdp4_kms.o \
mdp/mdp4/mdp4_plane.o \
......@@ -39,5 +41,6 @@ msm-y := \
msm_ringbuffer.o
msm-$(CONFIG_DRM_MSM_FBDEV) += msm_fbdev.o
msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
obj-$(CONFIG_DRM_MSM) += msm.o
......@@ -123,7 +123,7 @@ struct hdmi *hdmi_init(struct drm_device *dev, struct drm_encoder *encoder)
for (i = 0; i < config->hpd_reg_cnt; i++) {
struct regulator *reg;
reg = devm_regulator_get_exclusive(&pdev->dev,
reg = devm_regulator_get(&pdev->dev,
config->hpd_reg_names[i]);
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
......@@ -139,7 +139,7 @@ struct hdmi *hdmi_init(struct drm_device *dev, struct drm_encoder *encoder)
for (i = 0; i < config->pwr_reg_cnt; i++) {
struct regulator *reg;
reg = devm_regulator_get_exclusive(&pdev->dev,
reg = devm_regulator_get(&pdev->dev,
config->pwr_reg_names[i]);
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
......
......@@ -197,6 +197,28 @@ int mdp4_enable(struct mdp4_kms *mdp4_kms)
return 0;
}
#ifdef CONFIG_OF
static struct drm_panel *detect_panel(struct drm_device *dev, const char *name)
{
struct device_node *n;
struct drm_panel *panel = NULL;
n = of_parse_phandle(dev->dev->of_node, name, 0);
if (n) {
panel = of_drm_find_panel(n);
if (!panel)
panel = ERR_PTR(-EPROBE_DEFER);
}
return panel;
}
#else
static struct drm_panel *detect_panel(struct drm_device *dev, const char *name)
{
// ??? maybe use a module param to specify which panel is attached?
}
#endif
static int modeset_init(struct mdp4_kms *mdp4_kms)
{
struct drm_device *dev = mdp4_kms->dev;
......@@ -204,14 +226,11 @@ static int modeset_init(struct mdp4_kms *mdp4_kms)
struct drm_plane *plane;
struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_connector *connector;
struct drm_panel *panel;
struct hdmi *hdmi;
int ret;
/*
* NOTE: this is a bit simplistic until we add support
* for more than just RGB1->DMA_E->DTV->HDMI
*/
/* construct non-private planes: */
plane = mdp4_plane_init(dev, VG1, false);
if (IS_ERR(plane)) {
......@@ -229,7 +248,57 @@ static int modeset_init(struct mdp4_kms *mdp4_kms)
}
priv->planes[priv->num_planes++] = plane;
/* the CRTCs get constructed with a private plane: */
/*
* Setup the LCDC/LVDS path: RGB2 -> DMA_P -> LCDC -> LVDS:
*/
panel = detect_panel(dev, "qcom,lvds-panel");
if (IS_ERR(panel)) {
ret = PTR_ERR(panel);
dev_err(dev->dev, "failed to detect LVDS panel: %d\n", ret);
goto fail;
}
plane = mdp4_plane_init(dev, RGB2, true);
if (IS_ERR(plane)) {
dev_err(dev->dev, "failed to construct plane for RGB2\n");
ret = PTR_ERR(plane);
goto fail;
}
crtc = mdp4_crtc_init(dev, plane, priv->num_crtcs, 0, DMA_P);
if (IS_ERR(crtc)) {
dev_err(dev->dev, "failed to construct crtc for DMA_P\n");
ret = PTR_ERR(crtc);
goto fail;
}
encoder = mdp4_lcdc_encoder_init(dev, panel);
if (IS_ERR(encoder)) {
dev_err(dev->dev, "failed to construct LCDC encoder\n");
ret = PTR_ERR(encoder);
goto fail;
}
/* LCDC can be hooked to DMA_P: */
encoder->possible_crtcs = 1 << priv->num_crtcs;
priv->crtcs[priv->num_crtcs++] = crtc;
priv->encoders[priv->num_encoders++] = encoder;
connector = mdp4_lvds_connector_init(dev, panel, encoder);
if (IS_ERR(connector)) {
ret = PTR_ERR(connector);
dev_err(dev->dev, "failed to initialize LVDS connector: %d\n", ret);
goto fail;
}
priv->connectors[priv->num_connectors++] = connector;
/*
* Setup DTV/HDMI path: RGB1 -> DMA_E -> DTV -> HDMI:
*/
plane = mdp4_plane_init(dev, RGB1, true);
if (IS_ERR(plane)) {
dev_err(dev->dev, "failed to construct plane for RGB1\n");
......@@ -243,7 +312,6 @@ static int modeset_init(struct mdp4_kms *mdp4_kms)
ret = PTR_ERR(crtc);
goto fail;
}
priv->crtcs[priv->num_crtcs++] = crtc;
encoder = mdp4_dtv_encoder_init(dev);
if (IS_ERR(encoder)) {
......@@ -251,7 +319,11 @@ static int modeset_init(struct mdp4_kms *mdp4_kms)
ret = PTR_ERR(encoder);
goto fail;
}
encoder->possible_crtcs = 0x1; /* DTV can be hooked to DMA_E */
/* DTV can be hooked to DMA_E: */
encoder->possible_crtcs = 1 << priv->num_crtcs;
priv->crtcs[priv->num_crtcs++] = crtc;
priv->encoders[priv->num_encoders++] = encoder;
hdmi = hdmi_init(dev, encoder);
......
......@@ -23,6 +23,8 @@
#include "mdp/mdp_kms.h"
#include "mdp4.xml.h"
#include "drm_panel.h"
struct mdp4_kms {
struct mdp_kms base;
......@@ -217,6 +219,22 @@ struct drm_crtc *mdp4_crtc_init(struct drm_device *dev,
long mdp4_dtv_round_pixclk(struct drm_encoder *encoder, unsigned long rate);
struct drm_encoder *mdp4_dtv_encoder_init(struct drm_device *dev);
long mdp4_lcdc_round_pixclk(struct drm_encoder *encoder, unsigned long rate);
struct drm_encoder *mdp4_lcdc_encoder_init(struct drm_device *dev,
struct drm_panel *panel);
struct drm_connector *mdp4_lvds_connector_init(struct drm_device *dev,
struct drm_panel *panel, struct drm_encoder *encoder);
#ifdef CONFIG_COMMON_CLK
struct clk *mpd4_lvds_pll_init(struct drm_device *dev);
#else
static inline struct clk *mpd4_lvds_pll_init(struct drm_device *dev)
{
return ERR_PTR(-ENODEV);
}
#endif
#ifdef CONFIG_MSM_BUS_SCALING
static inline int match_dev_name(struct device *dev, void *data)
{
......
This diff is collapsed.
/*
* Copyright (C) 2014 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
* Author: Vinay Simha <vinaysimha@inforcecomputing.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/gpio.h>
#include "mdp4_kms.h"
struct mdp4_lvds_connector {
struct drm_connector base;
struct drm_encoder *encoder;
struct drm_panel *panel;
};
#define to_mdp4_lvds_connector(x) container_of(x, struct mdp4_lvds_connector, base)
static enum drm_connector_status mdp4_lvds_connector_detect(
struct drm_connector *connector, bool force)
{
struct mdp4_lvds_connector *mdp4_lvds_connector =
to_mdp4_lvds_connector(connector);
return mdp4_lvds_connector->panel ?
connector_status_connected :
connector_status_disconnected;
}
static void mdp4_lvds_connector_destroy(struct drm_connector *connector)
{
struct mdp4_lvds_connector *mdp4_lvds_connector =
to_mdp4_lvds_connector(connector);
struct drm_panel *panel = mdp4_lvds_connector->panel;
if (panel)
drm_panel_detach(panel);
drm_connector_unregister(connector);
drm_connector_cleanup(connector);
kfree(mdp4_lvds_connector);
}
static int mdp4_lvds_connector_get_modes(struct drm_connector *connector)
{
struct mdp4_lvds_connector *mdp4_lvds_connector =
to_mdp4_lvds_connector(connector);
struct drm_panel *panel = mdp4_lvds_connector->panel;
int ret = 0;
if (panel)
ret = panel->funcs->get_modes(panel);
return ret;
}
static int mdp4_lvds_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
struct mdp4_lvds_connector *mdp4_lvds_connector =
to_mdp4_lvds_connector(connector);
struct drm_encoder *encoder = mdp4_lvds_connector->encoder;
long actual, requested;
requested = 1000 * mode->clock;
actual = mdp4_lcdc_round_pixclk(encoder, requested);
DBG("requested=%ld, actual=%ld", requested, actual);
if (actual != requested)
return MODE_CLOCK_RANGE;
return MODE_OK;
}
static struct drm_encoder *
mdp4_lvds_connector_best_encoder(struct drm_connector *connector)
{
struct mdp4_lvds_connector *mdp4_lvds_connector =
to_mdp4_lvds_connector(connector);
return mdp4_lvds_connector->encoder;
}
static const struct drm_connector_funcs mdp4_lvds_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.detect = mdp4_lvds_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = mdp4_lvds_connector_destroy,
};
static const struct drm_connector_helper_funcs mdp4_lvds_connector_helper_funcs = {
.get_modes = mdp4_lvds_connector_get_modes,
.mode_valid = mdp4_lvds_connector_mode_valid,
.best_encoder = mdp4_lvds_connector_best_encoder,
};
/* initialize connector */
struct drm_connector *mdp4_lvds_connector_init(struct drm_device *dev,
struct drm_panel *panel, struct drm_encoder *encoder)
{
struct drm_connector *connector = NULL;
struct mdp4_lvds_connector *mdp4_lvds_connector;
int ret;
mdp4_lvds_connector = kzalloc(sizeof(*mdp4_lvds_connector), GFP_KERNEL);
if (!mdp4_lvds_connector) {
ret = -ENOMEM;
goto fail;
}
mdp4_lvds_connector->encoder = encoder;
mdp4_lvds_connector->panel = panel;
connector = &mdp4_lvds_connector->base;
drm_connector_init(dev, connector, &mdp4_lvds_connector_funcs,
DRM_MODE_CONNECTOR_LVDS);
drm_connector_helper_add(connector, &mdp4_lvds_connector_helper_funcs);
connector->polled = 0;
connector->interlace_allowed = 0;
connector->doublescan_allowed = 0;
drm_connector_register(connector);
drm_mode_connector_attach_encoder(connector, encoder);
if (panel)
drm_panel_attach(panel, connector);
return connector;
fail:
if (connector)
mdp4_lvds_connector_destroy(connector);
return ERR_PTR(ret);
}
/*
* Copyright (C) 2014 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include "mdp4_kms.h"
struct mdp4_lvds_pll {
struct clk_hw pll_hw;
struct drm_device *dev;
unsigned long pixclk;
};
#define to_mdp4_lvds_pll(x) container_of(x, struct mdp4_lvds_pll, pll_hw)
static struct mdp4_kms *get_kms(struct mdp4_lvds_pll *lvds_pll)
{
struct msm_drm_private *priv = lvds_pll->dev->dev_private;
return to_mdp4_kms(to_mdp_kms(priv->kms));
}
struct pll_rate {
unsigned long rate;
struct {
uint32_t val;
uint32_t reg;
} conf[32];
};
/* NOTE: keep sorted highest freq to lowest: */
static const struct pll_rate freqtbl[] = {
{ 72000000, {
{ 0x8f, REG_MDP4_LVDS_PHY_PLL_CTRL_1 },
{ 0x30, REG_MDP4_LVDS_PHY_PLL_CTRL_2 },
{ 0xc6, REG_MDP4_LVDS_PHY_PLL_CTRL_3 },
{ 0x10, REG_MDP4_LVDS_PHY_PLL_CTRL_5 },
{ 0x07, REG_MDP4_LVDS_PHY_PLL_CTRL_6 },
{ 0x62, REG_MDP4_LVDS_PHY_PLL_CTRL_7 },
{ 0x41, REG_MDP4_LVDS_PHY_PLL_CTRL_8 },
{ 0x0d, REG_MDP4_LVDS_PHY_PLL_CTRL_9 },
{ 0, 0 } }
},
};
static const struct pll_rate *find_rate(unsigned long rate)
{
int i;
for (i = 1; i < ARRAY_SIZE(freqtbl); i++)
if (rate > freqtbl[i].rate)
return &freqtbl[i-1];
return &freqtbl[i-1];
}
static int mpd4_lvds_pll_enable(struct clk_hw *hw)
{
struct mdp4_lvds_pll *lvds_pll = to_mdp4_lvds_pll(hw);
struct mdp4_kms *mdp4_kms = get_kms(lvds_pll);
const struct pll_rate *pll_rate = find_rate(lvds_pll->pixclk);
int i;
DBG("pixclk=%lu (%lu)", lvds_pll->pixclk, pll_rate->rate);
if (WARN_ON(!pll_rate))
return -EINVAL;
mdp4_write(mdp4_kms, REG_MDP4_LCDC_LVDS_PHY_RESET, 0x33);
for (i = 0; pll_rate->conf[i].reg; i++)
mdp4_write(mdp4_kms, pll_rate->conf[i].reg, pll_rate->conf[i].val);
mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_PLL_CTRL_0, 0x01);
/* Wait until LVDS PLL is locked and ready */
while (!mdp4_read(mdp4_kms, REG_MDP4_LVDS_PHY_PLL_LOCKED))
cpu_relax();
return 0;
}
static void mpd4_lvds_pll_disable(struct clk_hw *hw)
{
struct mdp4_lvds_pll *lvds_pll = to_mdp4_lvds_pll(hw);
struct mdp4_kms *mdp4_kms = get_kms(lvds_pll);
DBG("");
mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_CFG0, 0x0);
mdp4_write(mdp4_kms, REG_MDP4_LVDS_PHY_PLL_CTRL_0, 0x0);
}
static unsigned long mpd4_lvds_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct mdp4_lvds_pll *lvds_pll = to_mdp4_lvds_pll(hw);
return lvds_pll->pixclk;
}
static long mpd4_lvds_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
const struct pll_rate *pll_rate = find_rate(rate);
return pll_rate->rate;
}
static int mpd4_lvds_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct mdp4_lvds_pll *lvds_pll = to_mdp4_lvds_pll(hw);
lvds_pll->pixclk = rate;
return 0;
}
static const struct clk_ops mpd4_lvds_pll_ops = {
.enable = mpd4_lvds_pll_enable,
.disable = mpd4_lvds_pll_disable,
.recalc_rate = mpd4_lvds_pll_recalc_rate,
.round_rate = mpd4_lvds_pll_round_rate,
.set_rate = mpd4_lvds_pll_set_rate,
};
static const char *mpd4_lvds_pll_parents[] = {
"pxo",
};
static struct clk_init_data pll_init = {
.name = "mpd4_lvds_pll",
.ops = &mpd4_lvds_pll_ops,
.parent_names = mpd4_lvds_pll_parents,
.num_parents = ARRAY_SIZE(mpd4_lvds_pll_parents),
};
struct clk *mpd4_lvds_pll_init(struct drm_device *dev)
{
struct mdp4_lvds_pll *lvds_pll;
struct clk *clk;
int ret;
lvds_pll = devm_kzalloc(dev->dev, sizeof(*lvds_pll), GFP_KERNEL);
if (!lvds_pll) {
ret = -ENOMEM;
goto fail;
}
lvds_pll->dev = dev;
lvds_pll->pll_hw.init = &pll_init;
clk = devm_clk_register(dev->dev, &lvds_pll->pll_hw);
if (IS_ERR(clk)) {
ret = PTR_ERR(clk);
goto fail;
}
return clk;
fail:
return ERR_PTR(ret);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment