drm: lcdif: Drop unnecessary NULL pointer check on lcdif->bridge

A valid bridge is already found in lcdif_attach_bridge() and set
to lcdif->bridge, so lcdif->bridge cannot be a NULL pointer. Drop
the unnecessary NULL pointer check in KMS stage.
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510092450.4024730-3-victor.liu@nxp.com

drivers/gpu/drm/mxsfb/lcdif_kms.c

@@ -394,7 +394,7 @@ static void lcdif_crtc_mode_set_nofb(struct lcdif_drm_private *lcdif,
 	struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
 	u32 bus_flags = 0;
 
-	if (lcdif->bridge && lcdif->bridge->timings)
+	if (lcdif->bridge->timings)
 		bus_flags = lcdif->bridge->timings->input_bus_flags;
 	else if (bridge_state)
 		bus_flags = bridge_state->input_bus_cfg.flags;
@@ -463,30 +463,24 @@ static void lcdif_crtc_atomic_enable(struct drm_crtc *crtc,
 	struct drm_display_mode *m = &lcdif->crtc.state->adjusted_mode;
 	struct drm_bridge_state *bridge_state = NULL;
 	struct drm_device *drm = lcdif->drm;
-	u32 bus_format = 0;
+	u32 bus_format;
 	dma_addr_t paddr;
 
-	/* If there is a bridge attached to the LCDIF, use its bus format */
-	if (lcdif->bridge) {
-		bridge_state =
-			drm_atomic_get_new_bridge_state(state,
-							lcdif->bridge);
-		if (!bridge_state)
-			bus_format = MEDIA_BUS_FMT_FIXED;
-		else
-			bus_format = bridge_state->input_bus_cfg.format;
-
-		if (bus_format == MEDIA_BUS_FMT_FIXED) {
-			dev_warn_once(drm->dev,
-				      "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
-				      "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
-			bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-		}
-	}
+	bridge_state = drm_atomic_get_new_bridge_state(state, lcdif->bridge);
+	if (!bridge_state)
+		bus_format = MEDIA_BUS_FMT_FIXED;
+	else
+		bus_format = bridge_state->input_bus_cfg.format;
 
-	/* If all else fails, default to RGB888_1X24 */
-	if (!bus_format)
+	if (bus_format == MEDIA_BUS_FMT_FIXED) {
+		dev_warn_once(drm->dev,
+			      "Bridge does not provide bus format, assuming MEDIA_BUS_FMT_RGB888_1X24.\n"
+			      "Please fix bridge driver by handling atomic_get_input_bus_fmts.\n");
 		bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	} else if (!bus_format) {
+		/* If all else fails, default to RGB888_1X24 */
+		bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+	}
 
 	clk_set_rate(lcdif->clk, m->crtc_clock * 1000);