Commit 3f1f219c authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman

staging: comedi: s626: move s626_enc_chan_info[]

Move `s626_enc_chan_info[]` and remove its forward declaration.
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Reviewed-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent bc284a2a
......@@ -139,8 +139,6 @@ struct s626_enc_info {
uint16_t my_event_bits[4]; /* bit translations for IntSrc -->RDMISC2 */
};
static const struct s626_enc_info s626_enc_chan_info[];
/* Counter overflow/index event flag masks for RDMISC2. */
#define INDXMASK(C) (1 << (((C) > 2) ? ((C) * 2 - 1) : ((C) * 2 + 4)))
#define OVERMASK(C) (1 << (((C) > 2) ? ((C) * 2 + 5) : ((C) * 2 + 10)))
......@@ -1199,6 +1197,100 @@ static void pulse_index_b(struct comedi_device *dev,
debi_write(dev, k->my_crb, crb);
}
static const struct s626_enc_info s626_enc_chan_info[] = {
{
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR0A,
.my_crb = LP_CR0B,
.my_latch_lsw = LP_CNTR0ALSW,
.my_event_bits = EVBITS(0),
}, {
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR1A,
.my_crb = LP_CR1B,
.my_latch_lsw = LP_CNTR1ALSW,
.my_event_bits = EVBITS(1),
}, {
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR2A,
.my_crb = LP_CR2B,
.my_latch_lsw = LP_CNTR2ALSW,
.my_event_bits = EVBITS(2),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR0A,
.my_crb = LP_CR0B,
.my_latch_lsw = LP_CNTR0BLSW,
.my_event_bits = EVBITS(3),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR1A,
.my_crb = LP_CR1B,
.my_latch_lsw = LP_CNTR1BLSW,
.my_event_bits = EVBITS(4),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR2A,
.my_crb = LP_CR2B,
.my_latch_lsw = LP_CNTR2BLSW,
.my_event_bits = EVBITS(5),
},
};
static unsigned int s626_ai_reg_to_uint(int data)
{
unsigned int tempdata;
......@@ -2370,100 +2462,6 @@ static void close_dma_b(struct comedi_device *dev, struct buffer_dma *pdma,
}
}
static const struct s626_enc_info s626_enc_chan_info[] = {
{
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR0A,
.my_crb = LP_CR0B,
.my_latch_lsw = LP_CNTR0ALSW,
.my_event_bits = EVBITS(0),
}, {
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR1A,
.my_crb = LP_CR1B,
.my_latch_lsw = LP_CNTR1ALSW,
.my_event_bits = EVBITS(1),
}, {
.get_enable = get_enable_a,
.get_int_src = get_int_src_a,
.get_load_trig = get_load_trig_a,
.get_mode = get_mode_a,
.pulse_index = pulse_index_a,
.set_enable = set_enable_a,
.set_int_src = set_int_src_a,
.set_load_trig = set_load_trig_a,
.set_mode = set_mode_a,
.reset_cap_flags = reset_cap_flags_a,
.my_cra = LP_CR2A,
.my_crb = LP_CR2B,
.my_latch_lsw = LP_CNTR2ALSW,
.my_event_bits = EVBITS(2),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR0A,
.my_crb = LP_CR0B,
.my_latch_lsw = LP_CNTR0BLSW,
.my_event_bits = EVBITS(3),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR1A,
.my_crb = LP_CR1B,
.my_latch_lsw = LP_CNTR1BLSW,
.my_event_bits = EVBITS(4),
}, {
.get_enable = get_enable_b,
.get_int_src = get_int_src_b,
.get_load_trig = get_load_trig_b,
.get_mode = get_mode_b,
.pulse_index = pulse_index_b,
.set_enable = set_enable_b,
.set_int_src = set_int_src_b,
.set_load_trig = set_load_trig_b,
.set_mode = set_mode_b,
.reset_cap_flags = reset_cap_flags_b,
.my_cra = LP_CR2A,
.my_crb = LP_CR2B,
.my_latch_lsw = LP_CNTR2BLSW,
.my_event_bits = EVBITS(5),
},
};
static void counters_init(struct comedi_device *dev)
{
int chan;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment