Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: rx51: fix USB
  ARM: OMAP: mcbsp: Fix possible memory corruption
  arm/imx: fix power button on imx51 babbage board
  ARM: imx: fix cpufreq build errors
  ARM: mx5: add __initconst for fec pdata
  MXC PWM: should active during DOZE/WAIT/DBG mode
  ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS
  ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep
  ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210
  ARM: SAMSUNG: remove duplicated header include

arch/arm/mach-exynos/mct.c

@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
 
 	imx51_soc_init();
 

arch/arm/mach-mx5/board-mx53_evk.c

@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
 	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_loco.c

@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
 	gpio_set_value(LOCO_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_smd.c

@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = {
 static void __init rx51_charger_init(void)
 {
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
 	platform_device_register(&rx51_charger_device);
 }

arch/arm/mach-omap2/mcbsp.c

@@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->reg_size = 4;
 		pdata->has_ccr = true;
 	}
+	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+	if (id == 1)
+		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
@@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 	omap_mcbsp_count++;
 	return 0;
 }

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
 
 static struct platform_pwm_backlight_data smdkv210_bl_data = {
 	.pwm_id = 3,
+	.pwm_period_ns = 1000,
 };
 
 static void __init smdkv210_map_io(void)

arch/arm/plat-mxc/cpufreq.c

@@ -17,6 +17,7 @@
  * the CPU clock speed on the fly.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>

arch/arm/plat-mxc/pwm.c

@@ -32,6 +32,9 @@
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
@@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 
-		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;

arch/arm/plat-samsung/dev-backlight.c

@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/pwm_backlight.h>
-#include <linux/slab.h>
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>