Commit 3f8057cf authored by Sunil Goutham's avatar Sunil Goutham Committed by David S. Miller

net: thunderx: Add QSGMII interface type support

This patch adds support for QSGMII interface type to
the BGX driver. This type of interface is supported by
81xx SOC.
Signed-off-by: default avatarSunil Goutham <sgoutham@cavium.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 57aaf63c
......@@ -379,8 +379,9 @@ void bgx_lmac_internal_loopback(int node, int bgx_idx,
}
EXPORT_SYMBOL(bgx_lmac_internal_loopback);
static int bgx_lmac_sgmii_init(struct bgx *bgx, int lmacid)
static int bgx_lmac_sgmii_init(struct bgx *bgx, struct lmac *lmac)
{
int lmacid = lmac->lmacid;
u64 cfg;
bgx_reg_modify(bgx, lmacid, BGX_GMP_GMI_TXX_THRESH, 0x30);
......@@ -409,6 +410,14 @@ static int bgx_lmac_sgmii_init(struct bgx *bgx, int lmacid)
cfg |= (PCS_MRX_CTL_RST_AN | PCS_MRX_CTL_AN_EN);
bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MRX_CTL, cfg);
if (lmac->lmac_type == BGX_MODE_QSGMII) {
/* Disable disparity check for QSGMII */
cfg = bgx_reg_read(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL);
cfg &= ~PCS_MISC_CTL_DISP_EN;
bgx_reg_write(bgx, lmacid, BGX_GMP_PCS_MISCX_CTL, cfg);
return 0;
}
if (bgx_poll_reg(bgx, lmacid, BGX_GMP_PCS_MRX_STATUS,
PCS_MRX_STATUS_AN_CPT, false)) {
dev_err(&bgx->pdev->dev, "BGX AN_CPT not completed\n");
......@@ -650,6 +659,14 @@ static void bgx_poll_for_link(struct work_struct *work)
queue_delayed_work(lmac->check_link, &lmac->dwork, HZ * 2);
}
static int phy_interface_mode(u8 lmac_type)
{
if (lmac_type == BGX_MODE_QSGMII)
return PHY_INTERFACE_MODE_QSGMII;
return PHY_INTERFACE_MODE_SGMII;
}
static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
{
struct lmac *lmac;
......@@ -658,9 +675,10 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
lmac = &bgx->lmac[lmacid];
lmac->bgx = bgx;
if (lmac->lmac_type == BGX_MODE_SGMII) {
if ((lmac->lmac_type == BGX_MODE_SGMII) ||
(lmac->lmac_type == BGX_MODE_QSGMII)) {
lmac->is_sgmii = 1;
if (bgx_lmac_sgmii_init(bgx, lmacid))
if (bgx_lmac_sgmii_init(bgx, lmac))
return -1;
} else {
lmac->is_sgmii = 0;
......@@ -697,7 +715,7 @@ static int bgx_lmac_enable(struct bgx *bgx, u8 lmacid)
if (phy_connect_direct(&lmac->netdev, lmac->phydev,
bgx_lmac_handler,
PHY_INTERFACE_MODE_SGMII))
phy_interface_mode(lmac->lmac_type)))
return -ENODEV;
phy_start_aneg(lmac->phydev);
......@@ -799,6 +817,11 @@ static void bgx_init_hw(struct bgx *bgx)
bgx_reg_write(bgx, 0, BGX_CMR_RX_STREERING + (i * 8), 0x00);
}
static u8 bgx_get_lane2sds_cfg(struct bgx *bgx, struct lmac *lmac)
{
return (u8)(bgx_reg_read(bgx, lmac->lmacid, BGX_CMRX_CFG) & 0xFF);
}
static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
{
struct device *dev = &bgx->pdev->dev;
......@@ -838,12 +861,22 @@ static void bgx_print_qlm_mode(struct bgx *bgx, u8 lmacid)
else
dev_info(dev, "%s: 40G_KR4\n", (char *)str);
break;
default:
dev_info(dev, "%s: INVALID\n", (char *)str);
case BGX_MODE_QSGMII:
if ((lmacid == 0) &&
(bgx_get_lane2sds_cfg(bgx, lmac) != lmacid))
return;
if ((lmacid == 2) &&
(bgx_get_lane2sds_cfg(bgx, lmac) == lmacid))
return;
dev_info(dev, "%s: QSGMII\n", (char *)str);
break;
case BGX_MODE_INVALID:
/* Nothing to do */
break;
}
}
static void lmac_set_lane2sds(struct lmac *lmac)
static void lmac_set_lane2sds(struct bgx *bgx, struct lmac *lmac)
{
switch (lmac->lmac_type) {
case BGX_MODE_SGMII:
......@@ -857,6 +890,14 @@ static void lmac_set_lane2sds(struct lmac *lmac)
case BGX_MODE_RXAUI:
lmac->lane_to_sds = (lmac->lmacid) ? 0xE : 0x4;
break;
case BGX_MODE_QSGMII:
/* There is no way to determine if DLM0/2 is QSGMII or
* DLM1/3 is configured to QSGMII as bootloader will
* configure all LMACs, so take whatever is configured
* by low level firmware.
*/
lmac->lane_to_sds = bgx_get_lane2sds_cfg(bgx, lmac);
break;
default:
lmac->lane_to_sds = 0;
break;
......@@ -882,7 +923,7 @@ static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
lmac->use_training =
bgx_reg_read(bgx, 0, BGX_SPUX_BR_PMD_CRTL) &
SPU_PMD_CRTL_TRAIN_EN;
lmac_set_lane2sds(lmac);
lmac_set_lane2sds(bgx, lmac);
return;
}
......@@ -901,7 +942,7 @@ static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
lmac->use_training =
bgx_reg_read(bgx, idx, BGX_SPUX_BR_PMD_CRTL) &
SPU_PMD_CRTL_TRAIN_EN;
lmac_set_lane2sds(lmac);
lmac_set_lane2sds(bgx, lmac);
/* Set LMAC type of other lmac on same DLM i.e LMAC 1/3 */
olmac = &bgx->lmac[idx + 1];
......@@ -909,7 +950,7 @@ static void bgx_set_lmac_config(struct bgx *bgx, u8 idx)
olmac->use_training =
bgx_reg_read(bgx, idx + 1, BGX_SPUX_BR_PMD_CRTL) &
SPU_PMD_CRTL_TRAIN_EN;
lmac_set_lane2sds(olmac);
lmac_set_lane2sds(bgx, olmac);
}
}
......@@ -920,7 +961,7 @@ static bool is_dlm0_in_bgx_mode(struct bgx *bgx)
if (!bgx->is_81xx)
return true;
lmac = &bgx->lmac[1];
lmac = &bgx->lmac[0];
if (lmac->lmac_type == BGX_MODE_INVALID)
return false;
......@@ -946,7 +987,7 @@ static void bgx_get_qlm_mode(struct bgx *bgx)
if (bgx->lmac_count > MAX_LMAC_PER_BGX)
bgx->lmac_count = MAX_LMAC_PER_BGX;
for (idx = 0; idx < bgx->lmac_count; idx++)
for (idx = 0; idx < MAX_LMAC_PER_BGX; idx++)
bgx_set_lmac_config(bgx, idx);
if (!bgx->is_81xx) {
......
......@@ -146,6 +146,7 @@
#define BGX_GMP_PCS_ANX_AN_RESULTS 0x30020
#define BGX_GMP_PCS_SGM_AN_ADV 0x30068
#define BGX_GMP_PCS_MISCX_CTL 0x30078
#define PCS_MISC_CTL_DISP_EN BIT_ULL(13)
#define PCS_MISC_CTL_GMX_ENO BIT_ULL(11)
#define PCS_MISC_CTL_SAMP_PT_MASK 0x7Full
#define BGX_GMP_GMI_PRTX_CFG 0x38020
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment