Commit 4006f986 authored by DENG Qingfang's avatar DENG Qingfang Committed by David S. Miller

dt-bindings: net: dsa: add MT7530 interrupt controller binding

Add device tree binding to support MT7530 interrupt controller.
Signed-off-by: default avatarDENG Qingfang <dqfext@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ba751e28
...@@ -81,6 +81,12 @@ Optional properties: ...@@ -81,6 +81,12 @@ Optional properties:
- gpio-controller: Boolean; if defined, MT7530's LED controller will run on - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
GPIO mode. GPIO mode.
- #gpio-cells: Must be 2 if gpio-controller is defined. - #gpio-cells: Must be 2 if gpio-controller is defined.
- interrupt-controller: Boolean; Enables the internal interrupt controller.
If interrupt-controller is defined, the following properties are required.
- #interrupt-cells: Must be 1.
- interrupts: Parent interrupt for the interrupt controller.
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required, optional properties and how the integrated switch subnodes must required, optional properties and how the integrated switch subnodes must
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment