Merge branch 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This contains two bigger than usual tree-wide changes this time. They
  all have proper acks, caused no merge conflicts in linux-next where
  they have been for a while. They are namely:

   - to-gpiod conversion of the i2c-gpio driver and its users (touching
     arch/* and drivers/mfd/*)

   - adding a sbs-manager based on I2C core updates to SMBus alerts
     (touching drivers/power/*)

  Other notable changes:

   - i2c_boardinfo can now carry a dev_name to be used when the device
     is created. This is because some devices in ACPI world need fixed
     names to find the regulators.

   - the designware driver got a long discussed overhaul of its PM
     handling. img-scb and davinci got PM support, too.

   - at24 driver has way better OF support. And it has a new maintainer.
     Thanks Bartosz for stepping up!

  The rest is regular driver updates and fixes"

* 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits)
  ARM: sa1100: simpad: Correct I2C GPIO offsets
  i2c: aspeed: Deassert reset in probe
  eeprom: at24: Add OF device ID table
  MAINTAINERS: new maintainer for AT24 driver
  i2c: nuc900: remove platform_data, too
  i2c: thunderx: Remove duplicate NULL check
  i2c: taos-evm: Remove duplicate NULL check
  i2c: Make i2c_unregister_device() NULL-aware
  i2c: xgene-slimpro: Support v2
  i2c: mpc: remove useless variable initialization
  i2c: omap: Trigger bus recovery in lockup case
  i2c: gpio: Add support for named gpios in DT
  dt-bindings: i2c: i2c-gpio: Add support for named gpios
  i2c: gpio: Local vars in probe
  i2c: gpio: Augment all boardfiles to use open drain
  i2c: gpio: Enforce open drain through gpiolib
  gpio: Make it possible for consumers to enforce open drain
  i2c: gpio: Convert to use descriptors
  power: supply: sbs-message: fix some code style issues
  power: supply: sbs-battery: remove unchecked return var
  ...

Documentation/devicetree/bindings/eeprom/eeprom.txt

@@ -36,6 +36,8 @@ Optional properties:
 
   - read-only: this parameterless property disables writes to the eeprom
 
+  - size: total eeprom size in bytes
+
 Example:
 
 eeprom@52 {

Documentation/devicetree/bindings/i2c/i2c-aspeed.txt

@@ -7,7 +7,9 @@ Required Properties:
 - compatible		: should be "aspeed,ast2400-i2c-bus"
 			  or "aspeed,ast2500-i2c-bus"
 - clocks		: root clock of bus, should reference the APB
-			  clock
+			  clock in the second cell
+- resets		: phandle to reset controller with the reset number in
+			  the second cell
 - interrupts		: interrupt number
 - interrupt-parent	: interrupt controller for bus, should reference a
 			  aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
@@ -40,7 +42,8 @@ i2c {
 		#interrupt-cells = <1>;
 		reg = <0x40 0x40>;
 		compatible = "aspeed,ast2400-i2c-bus";
-		clocks = <&clk_apb>;
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
 		bus-frequency = <100000>;
 		interrupts = <0>;
 		interrupt-parent = <&i2c_ic>;

Documentation/devicetree/bindings/i2c/i2c-davinci.txt

@@ -6,6 +6,18 @@ davinci/keystone i2c interface contains.
 Required properties:
 - compatible: "ti,davinci-i2c" or "ti,keystone-i2c";
 - reg : Offset and length of the register set for the device
+- clocks: I2C functional clock phandle.
+	  For 66AK2G this property should be set per binding,
+	  Documentation/devicetree/bindings/clock/ti,sci-clk.txt
+
+SoC-specific Required Properties:
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains:	Should contain a phandle to a PM domain provider node
+			and an args specifier containing the I2C device id
+			value. This property is as per the binding,
+			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 
 Recommended properties :
 - interrupts : standard interrupt property.

Documentation/devicetree/bindings/i2c/i2c-gpio.txt

@@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver
 
 Required properties:
 	- compatible = "i2c-gpio";
-	- gpios: sda and scl gpio
-
+	- sda-gpios: gpio used for the sda signal, this should be flagged as
+	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
+	  open drain.
+	- scl-gpios: gpio used for the scl signal, this should be flagged as
+	  active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)
+	  from <dt-bindings/gpio/gpio.h> since the signal is by definition
+	  open drain.
 
 Optional properties:
-	- i2c-gpio,sda-open-drain: sda as open drain
-	- i2c-gpio,scl-open-drain: scl as open drain
 	- i2c-gpio,scl-output-only: scl as output only
 	- i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform)
 	- i2c-gpio,timeout-ms: timeout to get data
 
+Deprecated properties, do not use in new device tree sources:
+	- gpios: sda and scl gpio, alternative for {sda,scl}-gpios
+	- i2c-gpio,sda-open-drain: this means that something outside of our
+	  control has put the GPIO line used for SDA into open drain mode, and
+	  that something is not the GPIO chip. It is essentially an
+	  inconsistency flag.
+	- i2c-gpio,scl-open-drain: this means that something outside of our
+	  control has put the GPIO line used for SCL into open drain mode, and
+	  that something is not the GPIO chip. It is essentially an
+	  inconsistency flag.
+
 Example nodes:
 
+#include <dt-bindings/gpio/gpio.h>
+
 i2c@0 {
 	compatible = "i2c-gpio";
-	gpios = <&pioA 23 0 /* sda */
-		 &pioA 24 0 /* scl */
-		>;
-	i2c-gpio,sda-open-drain;
-	i2c-gpio,scl-open-drain;
+	sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 	i2c-gpio,delay-us = <2>;	/* ~100 kHz */
 	#address-cells = <1>;
 	#size-cells = <0>;

Documentation/devicetree/bindings/i2c/i2c-mux.txt

@@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus.
 
 Optional properties:
 - #address-cells = <1>;
-   This property is required is the i2c-mux child node does not exist.
+   This property is required if the i2c-mux child node does not exist.
 
 - #size-cells = <0>;
-   This property is required is the i2c-mux child node does not exist.
+   This property is required if the i2c-mux child node does not exist.
 
 - i2c-mux
    For i2c multiplexers/switches that have child nodes that are a mixture

Documentation/devicetree/bindings/i2c/i2c-rcar.txt

@@ -13,6 +13,7 @@ Required properties:
 	"renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC.
 	"renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC.
 	"renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC.
+	"renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC.
 	"renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device.
 	"renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible
 				device.

Documentation/devicetree/bindings/i2c/i2c.txt

@@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below.
 	interrupts used by the device.
 
 - interrupt-names
-	"irq" and "wakeup" names are recognized by I2C core, other names are
-	left to individual drivers.
+	"irq", "wakeup" and "smbus_alert" names are recognized by I2C core,
+	other names are	left to individual drivers.
 
 - host-notify
 	device uses SMBus host notify protocol instead of interrupt line.

Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt

+Binding for sbs-manager
+
+Required properties:
+- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part
+  number compatible string might be used in order to take care of vendor
+  specific registers.
+- reg: integer, i2c address of the device. Should be <0xa>.
+Optional properties:
+- gpio-controller: Marks the port as GPIO controller.
+  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell
+  is used to specify optional parameters:
+  See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt.
+
+From OS view the device is basically an i2c-mux used to communicate with up to
+four smart battery devices at address 0xb. The driver actually implements this
+behaviour. So standard i2c-mux nodes can be used to register up to four slave
+batteries. Channels will be numerated starting from 1 to 4.
+
+Example:
+
+batman@a {
+    compatible = "lltc,ltc1760", "sbs,sbs-manager";
+    reg = <0x0a>;
+    #address-cells = <1>;
+    #size-cells = <0>;
+
+    gpio-controller;
+    #gpio-cells = <2>;
+
+    i2c@1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <1>;
+
+        battery@b {
+            compatible = "ti,bq2060", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 1 1>;
+        };
+    };
+
+    i2c@2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <2>;
+
+        battery@b {
+            compatible = "ti,bq2060", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 2 1>;
+        };
+    };
+
+    i2c@3 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        reg = <3>;
+
+        battery@b {
+            compatible = "ti,bq2060", "sbs,sbs-battery";
+            reg = <0x0b>;
+            sbs,battery-detect-gpios = <&batman 3 1>;
+        };
+    };
+};

MAINTAINERS

@@ -2249,7 +2249,7 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c

arch/arm/mach-ep93xx/core.c

@@ -31,7 +31,7 @@
 #include <linux/amba/serial.h>
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/spi/spi.h>
 #include <linux/export.h>
 #include <linux/irqchip/arm-vic.h>
@@ -320,42 +320,47 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 /*************************************************************************
  * EP93xx i2c peripheral handling
  *************************************************************************/
-static struct i2c_gpio_platform_data ep93xx_i2c_data;
+
+/* All EP93xx devices use the same two GPIO pins for I2C bit-banging */
+static struct gpiod_lookup_table ep93xx_i2c_gpiod_table = {
+	.dev_id		= "i2c-gpio",
+	.table		= {
+		/* Use local offsets on gpiochip/port "G" */
+		GPIO_LOOKUP_IDX("G", 1, NULL, 0,
+				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		GPIO_LOOKUP_IDX("G", 0, NULL, 1,
+				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+	},
+};
 
 static struct platform_device ep93xx_i2c_device = {
 	.name		= "i2c-gpio",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &ep93xx_i2c_data,
+		.platform_data	= NULL,
 	},
 };
 
 /**
  * ep93xx_register_i2c - Register the i2c platform device.
- * @data:	platform specific i2c-gpio configuration (__initdata)
  * @devices:	platform specific i2c bus device information (__initdata)
  * @num:	the number of devices on the i2c bus
  */
-void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
-				struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 {
 	/*
-	 * Set the EEPROM interface pin drive type control.
-	 * Defines the driver type for the EECLK and EEDAT pins as either
-	 * open drain, which will require an external pull-up, or a normal
-	 * CMOS driver.
+	 * FIXME: this just sets the two pins as non-opendrain, as no
+	 * platforms tries to do that anyway. Flag the applicable lines
+	 * as open drain in the GPIO_LOOKUP above and the driver or
+	 * gpiolib will handle open drain/open drain emulation as need
+	 * be. Right now i2c-gpio emulates open drain which is not
+	 * optimal.
 	 */
-	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
-		pr_warning("sda != EEDAT, open drain has no effect\n");
-	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
-		pr_warning("scl != EECLK, open drain has no effect\n");
-
-	__raw_writel((data->sda_is_open_drain << 1) |
-		     (data->scl_is_open_drain << 0),
+	__raw_writel((0 << 1) | (0 << 0),
 		     EP93XX_GPIO_EEDRIVE);
 
-	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
+	gpiod_add_lookup_table(&ep93xx_i2c_gpiod_table);
 	platform_device_register(&ep93xx_i2c_device);
 }
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 
 #include <sound/cs4271.h>
@@ -61,14 +60,6 @@ static struct ep93xx_eth_data __initdata edb93xx_eth_data = {
 /*************************************************************************
  * EDB93xx i2c peripheral handling
  *************************************************************************/
-static struct i2c_gpio_platform_data __initdata edb93xx_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,	/* default to 100 kHz */
-	.timeout		= 0,	/* default to 100 ms */
-};
 
 static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
@@ -86,13 +77,11 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
-				    edb93xxa_i2c_board_info,
+		ep93xx_register_i2c(edb93xxa_i2c_board_info,
 				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9302() || machine_is_edb9307()
 		|| machine_is_edb9312() || machine_is_edb9315()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
-				    edb93xx_i2c_board_info,
+		ep93xx_register_i2c(edb93xx_i2c_board_info,
 				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -8,7 +8,6 @@
 #include <linux/reboot.h>
 
 struct device;
-struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct spi_board_info;
 struct platform_device;
@@ -37,8 +36,7 @@ void ep93xx_register_flash(unsigned int width,
 			   resource_size_t start, resource_size_t size);
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
-			 struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
 void ep93xx_register_spi(struct ep93xx_spi_info *info,
 			 struct spi_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);

arch/arm/mach-ep93xx/simone.c

@@ -19,7 +19,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/mmc_spi.h>
@@ -129,15 +128,6 @@ static struct ep93xx_spi_info simone_spi_info __initdata = {
 	.use_dma = 1,
 };
 
-static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,
-	.timeout		= 0,
-};
-
 static struct i2c_board_info __initdata simone_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
@@ -161,7 +151,7 @@ static void __init simone_init_machine(void)
 	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&simone_eth_data, 1);
 	ep93xx_register_fb(&simone_fb_info);
-	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,
+	ep93xx_register_i2c(simone_i2c_board_info,
 			    ARRAY_SIZE(simone_i2c_board_info));
 	ep93xx_register_spi(&simone_spi_info, simone_spi_devices,
 			    ARRAY_SIZE(simone_spi_devices));

arch/arm/mach-ep93xx/snappercl15.c

@@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
 #include <linux/fb.h>
 
 #include <linux/mtd/partitions.h>
@@ -127,15 +126,6 @@ static struct ep93xx_eth_data __initdata snappercl15_eth_data = {
 	.phy_id			= 1,
 };
 
-static struct i2c_gpio_platform_data __initdata snappercl15_i2c_gpio_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 0,
-	.timeout		= 0,
-};
-
 static struct i2c_board_info __initdata snappercl15_i2c_data[] = {
 	{
 		/* Audio codec */
@@ -161,7 +151,7 @@ static void __init snappercl15_init_machine(void)
 {
 	ep93xx_init_devices();
 	ep93xx_register_eth(&snappercl15_eth_data, 1);
-	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
+	ep93xx_register_i2c(snappercl15_i2c_data,
 			    ARRAY_SIZE(snappercl15_i2c_data));
 	ep93xx_register_fb(&snappercl15_fb_info);
 	snappercl15_register_audio();

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -22,7 +22,6 @@
 #include <linux/io.h>
 #include <linux/mtd/partitions.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
 #include <linux/platform_data/pca953x.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -144,10 +143,6 @@ static struct pca953x_platform_data pca953x_77_gpio_data = {
 /*************************************************************************
  * I2C Bus
  *************************************************************************/
-static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-};
 
 static struct i2c_board_info vision_i2c_info[] __initdata = {
 	{
@@ -289,7 +284,7 @@ static void __init vision_init_machine(void)
 
 	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
 
-	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
 				ARRAY_SIZE(vision_spi_board_info));

arch/arm/mach-ixp4xx/avila-setup.c

@@ -18,7 +18,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/i2c-gpio.h>
+#include <linux/gpio/machine.h>
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -50,16 +50,21 @@ static struct platform_device avila_flash = {
 	.resource	= &avila_flash_resource,
 };
 
-static struct i2c_gpio_platform_data avila_i2c_gpio_data = {
-	.sda_pin	= AVILA_SDA_PIN,
-	.scl_pin	= AVILA_SCL_PIN,
+static struct gpiod_lookup_table avila_i2c_gpiod_table = {
+	.dev_id		= "i2c-gpio",
+	.table		= {
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SDA_PIN,
+				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", AVILA_SCL_PIN,
+				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+	},
 };
 
 static struct platform_device avila_i2c_gpio = {
 	.name		= "i2c-gpio",
 	.id		= 0,
 	.dev	 = {
-		.platform_data	= &avila_i2c_gpio_data,
+		.platform_data	= NULL,
 	},
 };
 
@@ -148,6 +153,8 @@ static void __init avila_init(void)
 	avila_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
+	gpiod_add_lookup_table(&avila_i2c_gpiod_table);
+
 	platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
 
 	avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);

arch/arm/mach-ixp4xx/dsmg600-setup.c

@@ -26,7 +26,7 @@
 #include <linux/leds.h>
 #include <linux/reboot.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/gpio/machine.h>
 
 #include <mach/hardware.h>
 
@@ -69,16 +69,21 @@ static struct platform_device dsmg600_flash = {
 	.resource		= &dsmg600_flash_resource,
 };
 
-static struct i2c_gpio_platform_data dsmg600_i2c_gpio_data = {
-	.sda_pin		= DSMG600_SDA_PIN,
-	.scl_pin		= DSMG600_SCL_PIN,
+static struct gpiod_lookup_table dsmg600_i2c_gpiod_table = {
+	.dev_id		= "i2c-gpio",
+	.table		= {
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SDA_PIN,
+				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", DSMG600_SCL_PIN,
+				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+	},
 };
 
 static struct platform_device dsmg600_i2c_gpio = {
 	.name			= "i2c-gpio",
 	.id			= 0,
 	.dev	 = {
-		.platform_data	= &dsmg600_i2c_gpio_data,
+		.platform_data	= NULL,
 	},
 };
 
@@ -270,6 +275,7 @@ static void __init dsmg600_init(void)
 	dsmg600_flash_resource.end =
 		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
+	gpiod_add_lookup_table(&dsmg600_i2c_gpiod_table);
 	i2c_register_board_info(0, dsmg600_i2c_board_info,
 				ARRAY_SIZE(dsmg600_i2c_board_info));
 

arch/arm/mach-ixp4xx/fsg-setup.c

@@ -23,7 +23,7 @@
 #include <linux/leds.h>
 #include <linux/reboot.h>
 #include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -55,16 +55,21 @@ static struct platform_device fsg_flash = {
 	.resource		= &fsg_flash_resource,
 };
 
-static struct i2c_gpio_platform_data fsg_i2c_gpio_data = {
-	.sda_pin		= FSG_SDA_PIN,
-	.scl_pin		= FSG_SCL_PIN,
+static struct gpiod_lookup_table fsg_i2c_gpiod_table = {
+	.dev_id		= "i2c-gpio",
+	.table		= {
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SDA_PIN,
+				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", FSG_SCL_PIN,
+				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+	},
 };
 
 static struct platform_device fsg_i2c_gpio = {
 	.name			= "i2c-gpio",
 	.id			= 0,
 	.dev = {
-		.platform_data	= &fsg_i2c_gpio_data,
+		.platform_data	= NULL,
 	},
 };
 
@@ -197,6 +202,7 @@ static void __init fsg_init(void)
 	/* Configure CS2 for operation, 8bit and writable */
 	*IXP4XX_EXP_CS2 = 0xbfff0002;
 
+	gpiod_add_lookup_table(&fsg_i2c_gpiod_table);
 	i2c_register_board_info(0, fsg_i2c_board_info,
 				ARRAY_SIZE(fsg_i2c_board_info));
 

arch/arm/mach-ixp4xx/goramo_mlr.c

@@ -7,7 +7,6 @@
 #include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/hdlc.h>
-#include <linux/i2c-gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
@@ -79,6 +78,12 @@
 static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
 static u8 control_value;
 
+/*
+ * FIXME: this is reimplementing I2C bit-bangining. Move this
+ * over to using driver/i2c/busses/i2c-gpio.c like all other boards
+ * and register proper I2C device(s) on the bus for this. (See
+ * other IXP4xx boards for examples.)
+ */
 static void set_scl(u8 value)
 {
 	gpio_set_value(GPIO_SCL, !!value);
@@ -217,20 +222,6 @@ static struct platform_device device_flash = {
 	.resource	= &flash_resource,
 };
 
-
-/* I^2C interface */
-static struct i2c_gpio_platform_data i2c_data = {
-	.sda_pin	= GPIO_SDA,
-	.scl_pin	= GPIO_SCL,
-};
-
-static struct platform_device device_i2c = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= { .platform_data = &i2c_data },
-};
-
-
 /* IXP425 2 UART ports */
 static struct resource uart_resources[] = {
 	{
@@ -412,9 +403,6 @@ static void __init gmlr_init(void)
 	if (hw_bits & CFG_HW_HAS_HSS1)
 		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
 
-	if (hw_bits & CFG_HW_HAS_EEPROM)
-		device_tab[devices++] = &device_i2c; /* max index 6 */
-
 	gpio_request(GPIO_SCL, "SCL/clock");
 	gpio_request(GPIO_SDA, "SDA/data");
 	gpio_request(GPIO_STR, "strobe");

arch/arm/mach-ixp4xx/ixdp425-setup.c

@@ -15,7 +15,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
-#include <linux/i2c-gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
@@ -123,16 +123,21 @@ static struct platform_device ixdp425_flash_nand = {
 };
 #endif	/* CONFIG_MTD_NAND_PLATFORM */
 
-static struct i2c_gpio_platform_data ixdp425_i2c_gpio_data = {
-	.sda_pin	= IXDP425_SDA_PIN,
-	.scl_pin	= IXDP425_SCL_PIN,
+static struct gpiod_lookup_table ixdp425_i2c_gpiod_table = {
+	.dev_id		= "i2c-gpio",
+	.table		= {
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SDA_PIN,
+				NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+		GPIO_LOOKUP_IDX("IXP4XX_GPIO_CHIP", IXDP425_SCL_PIN,
+				NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+	},
 };
 
 static struct platform_device ixdp425_i2c_gpio = {
 	.name		= "i2c-gpio",
 	.id		= 0,
 	.dev	 = {
-		.platform_data	= &ixdp425_i2c_gpio_data,
+		.platform_data	= NULL,
 	},
 };
 
@@ -246,6 +251,7 @@ static void __init ixdp425_init(void)
 		ixdp425_uart_data[1].flags = 0;
 	}
 
+	gpiod_add_lookup_table(&ixdp425_i2c_gpiod_table);
 	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
 }