Commit 4072604b authored by Mark Brown's avatar Mark Brown

ASoC: Remove unused DAI format defines

The defines for TDM and synchronous clocks are not used - they are
mostly a legacy of the automatic clocking configuration.  TDM will
require configuration of the number of timeslots and which ones to use
so can't be fit into the DAI format and synchronous mode is handled by
symmetric_rates (and needs to be done by constraints rather than when
the DAI format is being configured).
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 33f503c9
......@@ -44,24 +44,6 @@ struct snd_pcm_substream;
#define SND_SOC_DAIFMT_CONT (0 << 4) /* continuous clock */
#define SND_SOC_DAIFMT_GATED (1 << 4) /* clock is gated */
/*
* DAI Left/Right Clocks.
*
* Specifies whether the DAI can support different samples for similtanious
* playback and capture. This usually requires a seperate physical frame
* clock for playback and capture.
*/
#define SND_SOC_DAIFMT_SYNC (0 << 5) /* Tx FRM = Rx FRM */
#define SND_SOC_DAIFMT_ASYNC (1 << 5) /* Tx FRM ~ Rx FRM */
/*
* TDM
*
* Time Division Multiplexing. Allows PCM data to be multplexed with other
* data on the DAI.
*/
#define SND_SOC_DAIFMT_TDM (1 << 6)
/*
* DAI hardware signal inversions.
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment