Commit 40d8bc28 authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: Rewrite ethernet platform setup

Rewrite ethernet setup to use runtime cpu detection, and also clean up
the ethernet base address mess as far as possible.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
parent 80130204
......@@ -13,9 +13,10 @@
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>
......@@ -372,15 +373,16 @@ static struct platform_device pbdb_smbus_device = {
#endif
/* Macro to help defining the Ethernet MAC resources */
#define MAC_RES_COUNT 3 /* MAC regs base, MAC enable reg, MAC INT */
#define MAC_RES(_base, _enable, _irq) \
{ \
.start = CPHYSADDR(_base), \
.end = CPHYSADDR(_base + 0xffff), \
.start = _base, \
.end = _base + 0xffff, \
.flags = IORESOURCE_MEM, \
}, \
{ \
.start = CPHYSADDR(_enable), \
.end = CPHYSADDR(_enable + 0x3), \
.start = _enable, \
.end = _enable + 0x3, \
.flags = IORESOURCE_MEM, \
}, \
{ \
......@@ -389,19 +391,29 @@ static struct platform_device pbdb_smbus_device = {
.flags = IORESOURCE_IRQ \
}
static struct resource au1xxx_eth0_resources[] = {
#if defined(CONFIG_SOC_AU1000)
MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1100)
MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT),
#endif
static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = {
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
AU1000_MAC0_DMA_INT)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC0_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR,
AU1500_MAC0_DMA_INT)
},
[ALCHEMY_CPU_AU1100] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
AU1100_MAC0_DMA_INT)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC0_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR,
AU1550_MAC0_DMA_INT)
},
};
static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
.phy1_search_mac0 = 1,
};
......@@ -409,20 +421,26 @@ static struct au1000_eth_platform_data au1xxx_eth0_platform_data = {
static struct platform_device au1xxx_eth0_device = {
.name = "au1000-eth",
.id = 0,
.num_resources = ARRAY_SIZE(au1xxx_eth0_resources),
.resource = au1xxx_eth0_resources,
.num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth0_platform_data,
};
#ifndef CONFIG_SOC_AU1100
static struct resource au1xxx_eth1_resources[] = {
#if defined(CONFIG_SOC_AU1000)
MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1550)
MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT),
#elif defined(CONFIG_SOC_AU1500)
MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT),
#endif
static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
[ALCHEMY_CPU_AU1000] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
AU1000_MAC1_DMA_INT)
},
[ALCHEMY_CPU_AU1500] = {
MAC_RES(AU1500_MAC1_PHYS_ADDR,
AU1500_MACEN_PHYS_ADDR + 4,
AU1500_MAC1_DMA_INT)
},
[ALCHEMY_CPU_AU1550] = {
MAC_RES(AU1000_MAC1_PHYS_ADDR,
AU1000_MACEN_PHYS_ADDR + 4,
AU1550_MAC1_DMA_INT)
},
};
static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
......@@ -432,11 +450,9 @@ static struct au1000_eth_platform_data au1xxx_eth1_platform_data = {
static struct platform_device au1xxx_eth1_device = {
.name = "au1000-eth",
.id = 1,
.num_resources = ARRAY_SIZE(au1xxx_eth1_resources),
.resource = au1xxx_eth1_resources,
.num_resources = MAC_RES_COUNT,
.dev.platform_data = &au1xxx_eth1_platform_data,
};
#endif
void __init au1xxx_override_eth_cfg(unsigned int port,
struct au1000_eth_platform_data *eth_data)
......@@ -447,11 +463,62 @@ void __init au1xxx_override_eth_cfg(unsigned int port,
if (port == 0)
memcpy(&au1xxx_eth0_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
#ifndef CONFIG_SOC_AU1100
else
memcpy(&au1xxx_eth1_platform_data, eth_data,
sizeof(struct au1000_eth_platform_data));
#endif
}
static void __init alchemy_setup_macs(int ctype)
{
int ret, i;
unsigned char ethaddr[6];
struct resource *macres;
/* Handle 1st MAC */
if (alchemy_get_macs(ctype) < 1)
return;
macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
return;
}
memcpy(macres, au1xxx_eth0_resources[ctype],
sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth0_device.resource = macres;
i = prom_get_ethernet_addr(ethaddr);
if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
ret = platform_device_register(&au1xxx_eth0_device);
if (!ret)
printk(KERN_INFO "Alchemy: failed to register MAC0\n");
/* Handle 2nd MAC */
if (alchemy_get_macs(ctype) < 2)
return;
macres = kmalloc(sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL);
if (!macres) {
printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
return;
}
memcpy(macres, au1xxx_eth1_resources[ctype],
sizeof(struct resource) * MAC_RES_COUNT);
au1xxx_eth1_device.resource = macres;
ethaddr[5] += 1; /* next addr for 2nd MAC */
if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
/* Register second MAC if enabled in pinfunc */
if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) {
ret = platform_device_register(&au1xxx_eth1_device);
if (ret)
printk(KERN_INFO "Alchemy: failed to register MAC1\n");
}
}
static struct platform_device *au1xxx_platform_devices[] __initdata = {
......@@ -472,33 +539,17 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
#ifdef SMBUS_PSC_BASE
&pbdb_smbus_device,
#endif
&au1xxx_eth0_device,
};
static int __init au1xxx_platform_init(void)
{
int err, i, ctype = alchemy_get_cputype();
unsigned char ethaddr[6];
int err, ctype = alchemy_get_cputype();
alchemy_setup_uarts(ctype);
/* use firmware-provided mac addr if available and necessary */
i = prom_get_ethernet_addr(ethaddr);
if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac))
memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6);
alchemy_setup_macs(ctype);
err = platform_add_devices(au1xxx_platform_devices,
ARRAY_SIZE(au1xxx_platform_devices));
#ifndef CONFIG_SOC_AU1100
ethaddr[5] += 1; /* next addr for 2nd MAC */
if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac))
memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6);
/* Register second MAC if enabled in pinfunc */
if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
err = platform_device_register(&au1xxx_eth1_device);
#endif
return err;
}
......
......@@ -219,6 +219,20 @@ static inline void alchemy_uart_putchar(u32 uart_phys, u8 c)
wmb();
}
/* return number of ethernet MACs on a given cputype */
static inline int alchemy_get_macs(int type)
{
switch (type) {
case ALCHEMY_CPU_AU1000:
case ALCHEMY_CPU_AU1500:
case ALCHEMY_CPU_AU1550:
return 2;
case ALCHEMY_CPU_AU1100:
return 1;
}
return 0;
}
/* arch/mips/au1000/common/clocks.c */
extern void set_au1x00_speed(unsigned int new_freq);
extern unsigned int get_au1x00_speed(void);
......@@ -673,6 +687,12 @@ enum soc_au1200_ints {
*/
#define AU1000_IC0_PHYS_ADDR 0x10400000 /* 01234 */
#define AU1000_MAC0_PHYS_ADDR 0x10500000 /* 023 */
#define AU1000_MAC1_PHYS_ADDR 0x10510000 /* 023 */
#define AU1000_MACEN_PHYS_ADDR 0x10520000 /* 023 */
#define AU1500_MAC0_PHYS_ADDR 0x11500000 /* 1 */
#define AU1500_MAC1_PHYS_ADDR 0x11510000 /* 1 */
#define AU1500_MACEN_PHYS_ADDR 0x11520000 /* 1 */
#define AU1000_UART0_PHYS_ADDR 0x11100000 /* 01234 */
#define AU1000_UART1_PHYS_ADDR 0x11200000 /* 0234 */
#define AU1000_UART2_PHYS_ADDR 0x11300000 /* 0 */
......@@ -680,6 +700,8 @@ enum soc_au1200_ints {
#define AU1000_IC1_PHYS_ADDR 0x11800000 /* 01234 */
#define AU1550_DBDMA_PHYS_ADDR 0x14002000 /* 34 */
#define AU1550_DBDMA_CONF_PHYS_ADDR 0x14003000 /* 34 */
#define AU1000_MACDMA0_PHYS_ADDR 0x14004000 /* 0123 */
#define AU1000_MACDMA1_PHYS_ADDR 0x14004200 /* 0123 */
#ifdef CONFIG_SOC_AU1000
......@@ -697,11 +719,6 @@ enum soc_au1200_ints {
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
......@@ -728,11 +745,6 @@ enum soc_au1200_ints {
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x11500000
#define MAC1_PHYS_ADDR 0x11510000
#define MACEN_PHYS_ADDR 0x11520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
......@@ -764,10 +776,6 @@ enum soc_au1200_ints {
#define USBH_PHYS_ADDR 0x10100000
#define USBD_PHYS_ADDR 0x10200000
#define IRDA_PHYS_ADDR 0x10300000
#define MAC0_PHYS_ADDR 0x10500000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define I2S_PHYS_ADDR 0x11000000
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
......@@ -787,11 +795,6 @@ enum soc_au1200_ints {
#define USBH_PHYS_ADDR 0x14020000
#define USBD_PHYS_ADDR 0x10200000
#define PCI_PHYS_ADDR 0x14005000
#define MAC0_PHYS_ADDR 0x10500000
#define MAC1_PHYS_ADDR 0x10510000
#define MACEN_PHYS_ADDR 0x10520000
#define MACDMA0_PHYS_ADDR 0x14004000
#define MACDMA1_PHYS_ADDR 0x14004200
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define PE_PHYS_ADDR 0x14008000
......@@ -870,12 +873,6 @@ enum soc_au1200_ints {
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT
#define AU1000_ETH0_BASE 0xB0500000
#define AU1000_ETH1_BASE 0xB0510000
#define AU1000_MAC0_ENABLE 0xB0520000
#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
/* Au1500 */
......@@ -887,12 +884,6 @@ enum soc_au1200_ints {
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017fffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT
#define AU1500_ETH0_BASE 0xB1500000
#define AU1500_ETH1_BASE 0xB1510000
#define AU1500_MAC0_ENABLE 0xB1520000
#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
/* Au1100 */
......@@ -904,10 +895,6 @@ enum soc_au1200_ints {
#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
#define USB_HOST_CONFIG 0xB017FFFC
#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT
#define AU1100_ETH0_BASE 0xB0500000
#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
#ifdef CONFIG_SOC_AU1550
......@@ -917,12 +904,6 @@ enum soc_au1200_ints {
#define USB_OHCI_LEN 0x00060000
#define USB_HOST_CONFIG 0xB4027ffc
#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT
#define AU1550_ETH0_BASE 0xB0500000
#define AU1550_ETH1_BASE 0xB0510000
#define AU1550_MAC0_ENABLE 0xB0520000
#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment