Commit 40e30d26 authored by Drew Fustini's avatar Drew Fustini Committed by Linus Walleij

gpio: omap: handle pin config bias flags

Modify omap_gpio_set_config() to handle pin config bias flags by calling
gpiochip_generic_config().

The pin group for the gpio line must have the corresponding pinconf
properties:

PIN_CONFIG_BIAS_PULL_UP requires "pinctrl-single,bias-pullup"
PIN_CONFIG_BIAS_PULL_DOWN requires "pinctrl-single,bias-pulldown"

This is necessary for pcs_pinconf_set() to find the requested bias
parameter in the PIN_MAP_TYPE_CONFIGS_GROUP pinctrl map.
Signed-off-by: default avatarDrew Fustini <drew@beagleboard.org>
Acked-by: default avatarGrygorii Strashko <grygorii.strashko@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20200715213738.1640030-1-drew@beagleboard.orgSigned-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 89b060a0
......@@ -896,12 +896,21 @@ static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
unsigned long config)
{
u32 debounce;
int ret = -ENOTSUPP;
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
return -ENOTSUPP;
if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) ||
(pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) ||
(pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN))
{
ret = gpiochip_generic_config(chip, offset, config);
}
else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE)
{
debounce = pinconf_to_config_argument(config);
ret = omap_gpio_debounce(chip, offset, debounce);
}
debounce = pinconf_to_config_argument(config);
return omap_gpio_debounce(chip, offset, debounce);
return ret;
}
static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment