Commit 40fd9090 authored by Nevenko Stupar's avatar Nevenko Stupar Committed by Alex Deucher

drm/amd/display:Use Pixel clock in 100Hz units for HDMI Audio wall clock DTO

[Why]
-Pass and use pixel clock in 100 Hz to Audio for HDMI
audio DTO for Audio wall clock programming so audio DTO gets
increased precision for timings with /1001 factor.
-For HDMI TMDS for N and CTS ACR tables are based on 10 KHz
units, these does not need to be modified as N and CTS values
are still valid using current tables.
Signed-off-by: default avatarNevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: default avatarCharlene Liu <Charlene.Liu@amd.com>
Acked-by: default avatarLeo Li <sunpeng.li@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 7cecfe9d
......@@ -145,20 +145,20 @@ static void check_audio_bandwidth_hdmi(
if (channel_count > 2) {
/* Based on HDMI spec 1.3 Table 7.5 */
if ((crtc_info->requested_pixel_clock <= 27000) &&
if ((crtc_info->requested_pixel_clock_100Hz <= 270000) &&
(crtc_info->v_active <= 576) &&
!(crtc_info->interlaced) &&
!(crtc_info->pixel_repetition == 2 ||
crtc_info->pixel_repetition == 4)) {
limit_freq_to_48_khz = true;
} else if ((crtc_info->requested_pixel_clock <= 27000) &&
} else if ((crtc_info->requested_pixel_clock_100Hz <= 270000) &&
(crtc_info->v_active <= 576) &&
(crtc_info->interlaced) &&
(crtc_info->pixel_repetition == 2)) {
limit_freq_to_88_2_khz = true;
} else if ((crtc_info->requested_pixel_clock <= 54000) &&
} else if ((crtc_info->requested_pixel_clock_100Hz <= 540000) &&
(crtc_info->v_active <= 576) &&
!(crtc_info->interlaced)) {
limit_freq_to_174_4_khz = true;
......@@ -737,8 +737,8 @@ void dce_aud_az_configure(
/* search pixel clock value for Azalia HDMI Audio */
static void get_azalia_clock_info_hdmi(
uint32_t crtc_pixel_clock_in_khz,
uint32_t actual_pixel_clock_in_khz,
uint32_t crtc_pixel_clock_100hz,
uint32_t actual_pixel_clock_100Hz,
struct azalia_clock_info *azalia_clock_info)
{
/* audio_dto_phase= 24 * 10,000;
......@@ -749,11 +749,11 @@ static void get_azalia_clock_info_hdmi(
/* audio_dto_module = PCLKFrequency * 10,000;
* [khz] -> [100Hz] */
azalia_clock_info->audio_dto_module =
actual_pixel_clock_in_khz * 10;
actual_pixel_clock_100Hz;
}
static void get_azalia_clock_info_dp(
uint32_t requested_pixel_clock_in_khz,
uint32_t requested_pixel_clock_100Hz,
const struct audio_pll_info *pll_info,
struct azalia_clock_info *azalia_clock_info)
{
......@@ -792,15 +792,15 @@ void dce_aud_wall_dto_setup(
/* calculate DTO settings */
get_azalia_clock_info_hdmi(
crtc_info->requested_pixel_clock,
crtc_info->calculated_pixel_clock,
crtc_info->requested_pixel_clock_100Hz,
crtc_info->calculated_pixel_clock_100Hz,
&clock_info);
DC_LOG_HW_AUDIO("\n%s:Input::requested_pixel_clock = %d"\
"calculated_pixel_clock =%d\n"\
DC_LOG_HW_AUDIO("\n%s:Input::requested_pixel_clock_100Hz = %d"\
"calculated_pixel_clock_100Hz =%d\n"\
"audio_dto_module = %d audio_dto_phase =%d \n\n", __func__,\
crtc_info->requested_pixel_clock,\
crtc_info->calculated_pixel_clock,\
crtc_info->requested_pixel_clock_100Hz,\
crtc_info->calculated_pixel_clock_100Hz,\
clock_info.audio_dto_module,\
clock_info.audio_dto_phase);
......@@ -833,7 +833,7 @@ void dce_aud_wall_dto_setup(
calculate DTO settings */
get_azalia_clock_info_dp(
crtc_info->requested_pixel_clock,
crtc_info->requested_pixel_clock_100Hz,
pll_info,
&clock_info);
......
......@@ -1251,13 +1251,13 @@ static uint32_t calc_max_audio_packets_per_line(
static void get_audio_clock_info(
enum dc_color_depth color_depth,
uint32_t crtc_pixel_clock_in_khz,
uint32_t actual_pixel_clock_in_khz,
uint32_t crtc_pixel_clock_100Hz,
uint32_t actual_pixel_clock_100Hz,
struct audio_clock_info *audio_clock_info)
{
const struct audio_clock_info *clock_info;
uint32_t index;
uint32_t crtc_pixel_clock_in_10khz = crtc_pixel_clock_in_khz / 10;
uint32_t crtc_pixel_clock_in_10khz = crtc_pixel_clock_100Hz / 100;
uint32_t audio_array_size;
switch (color_depth) {
......@@ -1294,16 +1294,16 @@ static void get_audio_clock_info(
}
/* not found */
if (actual_pixel_clock_in_khz == 0)
actual_pixel_clock_in_khz = crtc_pixel_clock_in_khz;
if (actual_pixel_clock_100Hz == 0)
actual_pixel_clock_100Hz = crtc_pixel_clock_100Hz;
/* See HDMI spec the table entry under
* pixel clock of "Other". */
audio_clock_info->pixel_clock_in_10khz =
actual_pixel_clock_in_khz / 10;
audio_clock_info->cts_32khz = actual_pixel_clock_in_khz;
audio_clock_info->cts_44khz = actual_pixel_clock_in_khz;
audio_clock_info->cts_48khz = actual_pixel_clock_in_khz;
actual_pixel_clock_100Hz / 100;
audio_clock_info->cts_32khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->cts_44khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->cts_48khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->n_32khz = 4096;
audio_clock_info->n_44khz = 6272;
......@@ -1369,14 +1369,14 @@ static void dce110_se_setup_hdmi_audio(
/* Program audio clock sample/regeneration parameters */
get_audio_clock_info(crtc_info->color_depth,
crtc_info->requested_pixel_clock,
crtc_info->calculated_pixel_clock,
crtc_info->requested_pixel_clock_100Hz,
crtc_info->calculated_pixel_clock_100Hz,
&audio_clock_info);
DC_LOG_HW_AUDIO(
"\n%s:Input::requested_pixel_clock = %d" \
"calculated_pixel_clock = %d \n", __func__, \
crtc_info->requested_pixel_clock, \
crtc_info->calculated_pixel_clock);
"\n%s:Input::requested_pixel_clock_100Hz = %d" \
"calculated_pixel_clock_100Hz = %d \n", __func__, \
crtc_info->requested_pixel_clock_100Hz, \
crtc_info->calculated_pixel_clock_100Hz);
/* HDMI_ACR_32_0__HDMI_ACR_CTS_32_MASK */
REG_UPDATE(HDMI_ACR_32_0, HDMI_ACR_CTS_32, audio_clock_info.cts_32khz);
......
......@@ -1162,27 +1162,27 @@ static void build_audio_output(
stream->timing.flags.INTERLACE;
audio_output->crtc_info.refresh_rate =
(stream->timing.pix_clk_100hz*10000)/
(stream->timing.pix_clk_100hz*100)/
(stream->timing.h_total*stream->timing.v_total);
audio_output->crtc_info.color_depth =
stream->timing.display_color_depth;
audio_output->crtc_info.requested_pixel_clock =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10;
audio_output->crtc_info.requested_pixel_clock_100Hz =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz;
audio_output->crtc_info.calculated_pixel_clock =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz / 10;
audio_output->crtc_info.calculated_pixel_clock_100Hz =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz;
/*for HDMI, audio ACR is with deep color ratio factor*/
if (dc_is_hdmi_signal(pipe_ctx->stream->signal) &&
audio_output->crtc_info.requested_pixel_clock ==
(stream->timing.pix_clk_100hz / 10)) {
audio_output->crtc_info.requested_pixel_clock_100Hz ==
(stream->timing.pix_clk_100hz)) {
if (pipe_ctx->stream_res.pix_clk_params.pixel_encoding == PIXEL_ENCODING_YCBCR420) {
audio_output->crtc_info.requested_pixel_clock =
audio_output->crtc_info.requested_pixel_clock/2;
audio_output->crtc_info.calculated_pixel_clock =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz/20;
audio_output->crtc_info.requested_pixel_clock_100Hz =
audio_output->crtc_info.requested_pixel_clock_100Hz/2;
audio_output->crtc_info.calculated_pixel_clock_100Hz =
pipe_ctx->stream_res.pix_clk_params.requested_pix_clk_100hz/2;
}
}
......
......@@ -1196,13 +1196,13 @@ static union audio_cea_channels speakers_to_channels(
void get_audio_clock_info(
enum dc_color_depth color_depth,
uint32_t crtc_pixel_clock_in_khz,
uint32_t actual_pixel_clock_in_khz,
uint32_t crtc_pixel_clock_100Hz,
uint32_t actual_pixel_clock_100Hz,
struct audio_clock_info *audio_clock_info)
{
const struct audio_clock_info *clock_info;
uint32_t index;
uint32_t crtc_pixel_clock_in_10khz = crtc_pixel_clock_in_khz / 10;
uint32_t crtc_pixel_clock_in_10khz = crtc_pixel_clock_100Hz / 100;
uint32_t audio_array_size;
switch (color_depth) {
......@@ -1239,16 +1239,16 @@ void get_audio_clock_info(
}
/* not found */
if (actual_pixel_clock_in_khz == 0)
actual_pixel_clock_in_khz = crtc_pixel_clock_in_khz;
if (actual_pixel_clock_100Hz == 0)
actual_pixel_clock_100Hz = crtc_pixel_clock_100Hz;
/* See HDMI spec the table entry under
* pixel clock of "Other". */
audio_clock_info->pixel_clock_in_10khz =
actual_pixel_clock_in_khz / 10;
audio_clock_info->cts_32khz = actual_pixel_clock_in_khz;
audio_clock_info->cts_44khz = actual_pixel_clock_in_khz;
audio_clock_info->cts_48khz = actual_pixel_clock_in_khz;
actual_pixel_clock_100Hz / 100;
audio_clock_info->cts_32khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->cts_44khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->cts_48khz = actual_pixel_clock_100Hz / 10;
audio_clock_info->n_32khz = 4096;
audio_clock_info->n_44khz = 6272;
......@@ -1308,14 +1308,14 @@ static void enc1_se_setup_hdmi_audio(
/* Program audio clock sample/regeneration parameters */
get_audio_clock_info(crtc_info->color_depth,
crtc_info->requested_pixel_clock,
crtc_info->calculated_pixel_clock,
crtc_info->requested_pixel_clock_100Hz,
crtc_info->calculated_pixel_clock_100Hz,
&audio_clock_info);
DC_LOG_HW_AUDIO(
"\n%s:Input::requested_pixel_clock = %d" \
"calculated_pixel_clock = %d \n", __func__, \
crtc_info->requested_pixel_clock, \
crtc_info->calculated_pixel_clock);
"\n%s:Input::requested_pixel_clock_100Hz = %d" \
"calculated_pixel_clock_100Hz = %d \n", __func__, \
crtc_info->requested_pixel_clock_100Hz, \
crtc_info->calculated_pixel_clock_100Hz);
/* HDMI_ACR_32_0__HDMI_ACR_CTS_32_MASK */
REG_UPDATE(HDMI_ACR_32_0, HDMI_ACR_CTS_32, audio_clock_info.cts_32khz);
......
......@@ -605,8 +605,8 @@ void enc1_se_enable_dp_audio(
void get_audio_clock_info(
enum dc_color_depth color_depth,
uint32_t crtc_pixel_clock_in_khz,
uint32_t actual_pixel_clock_in_khz,
uint32_t crtc_pixel_clock_100Hz,
uint32_t actual_pixel_clock_100Hz,
struct audio_clock_info *audio_clock_info);
#endif /* __DC_STREAM_ENCODER_DCN10_H__ */
......@@ -38,8 +38,8 @@ struct audio_crtc_info {
uint32_t h_active;
uint32_t v_active;
uint32_t pixel_repetition;
uint32_t requested_pixel_clock; /* in KHz */
uint32_t calculated_pixel_clock; /* in KHz */
uint32_t requested_pixel_clock_100Hz; /* in 100Hz */
uint32_t calculated_pixel_clock_100Hz; /* in 100Hz */
uint32_t refresh_rate;
enum dc_color_depth color_depth;
bool interlaced;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment