Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2016-04-13

This series contains updates to i40e, i40evf and fm10k.

Alex fixes a bug introduced earlier based on his interpretation of the
XL710 datasheet.  The actual limit for fragments with TSO and a skbuff
that has payload data in the header portion of the buffer is actually
only 7 fragments and the skb-data portion counts as 2 buffers, one for
the TSO header, and the one for a segment payload buffer.

Jacob fixes a bug where in a previous refactor of the code broke
multi-bit updates for VFs.  The problem occurs because a multi-bit
request has a non-zero length, and the PF would simply drop any
request with the upper 16 bits set.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/fm10k/fm10k_pf.c

@@ -1223,18 +1223,32 @@ s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
 		if (err)
 			return err;
 
-		/* verify upper 16 bits are zero */
-		if (vid >> 16)
-			return FM10K_ERR_PARAM;
-
 		set = !(vid & FM10K_VLAN_CLEAR);
 		vid &= ~FM10K_VLAN_CLEAR;
 
-		err = fm10k_iov_select_vid(vf_info, (u16)vid);
-		if (err < 0)
-			return err;
+		/* if the length field has been set, this is a multi-bit
+		 * update request. For multi-bit requests, simply disallow
+		 * them when the pf_vid has been set. In this case, the PF
+		 * should have already cleared the VLAN_TABLE, and if we
+		 * allowed them, it could allow a rogue VF to receive traffic
+		 * on a VLAN it was not assigned. In the single-bit case, we
+		 * need to modify requests for VLAN 0 to use the default PF or
+		 * SW vid when assigned.
+		 */
 
-		vid = err;
+		if (vid >> 16) {
+			/* prevent multi-bit requests when PF has
+			 * administratively set the VLAN for this VF
+			 */
+			if (vf_info->pf_vid)
+				return FM10K_ERR_PARAM;
+		} else {
+			err = fm10k_iov_select_vid(vf_info, (u16)vid);
+			if (err < 0)
+				return err;
+
+			vid = err;
+		}
 
 		/* update VSI info for VF in regards to VLAN table */
 		err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -2594,35 +2594,34 @@ int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
 }
 
 /**
- * __i40e_chk_linearize - Check if there are more than 8 fragments per packet
+ * __i40e_chk_linearize - Check if there are more than 8 buffers per packet
  * @skb:      send buffer
  *
- * Note: Our HW can't scatter-gather more than 8 fragments to build
- * a packet on the wire and so we need to figure out the cases where we
- * need to linearize the skb.
+ * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
+ * and so we need to figure out the cases where we need to linearize the skb.
+ *
+ * For TSO we need to count the TSO header and segment payload separately.
+ * As such we need to check cases where we have 7 fragments or more as we
+ * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
+ * the segment payload in the first descriptor, and another 7 for the
+ * fragments.
  **/
 bool __i40e_chk_linearize(struct sk_buff *skb)
 {
 	const struct skb_frag_struct *frag, *stale;
-	int gso_size, nr_frags, sum;
-
-	/* check to see if TSO is enabled, if so we may get a repreive */
-	gso_size = skb_shinfo(skb)->gso_size;
-	if (unlikely(!gso_size))
-		return true;
+	int nr_frags, sum;
 
-	/* no need to check if number of frags is less than 8 */
+	/* no need to check if number of frags is less than 7 */
 	nr_frags = skb_shinfo(skb)->nr_frags;
-	if (nr_frags < I40E_MAX_BUFFER_TXD)
+	if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
 		return false;
 
 	/* We need to walk through the list and validate that each group
 	 * of 6 fragments totals at least gso_size.  However we don't need
-	 * to perform such validation on the first or last 6 since the first
-	 * 6 cannot inherit any data from a descriptor before them, and the
-	 * last 6 cannot inherit any data from a descriptor after them.
+	 * to perform such validation on the last 6 since the last 6 cannot
+	 * inherit any data from a descriptor after them.
 	 */
-	nr_frags -= I40E_MAX_BUFFER_TXD - 1;
+	nr_frags -= I40E_MAX_BUFFER_TXD - 2;
 	frag = &skb_shinfo(skb)->frags[0];
 
 	/* Initialize size to the negative value of gso_size minus 1.  We
@@ -2631,21 +2630,21 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
 	 * descriptors for a single transmit as the header and previous
 	 * fragment are already consuming 2 descriptors.
 	 */
-	sum = 1 - gso_size;
+	sum = 1 - skb_shinfo(skb)->gso_size;
 
-	/* Add size of frags 1 through 5 to create our initial sum */
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
+	/* Add size of frags 0 through 4 to create our initial sum */
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
 
 	/* Walk through fragments adding latest fragment, testing it, and
 	 * then removing stale fragments from the sum.
 	 */
 	stale = &skb_shinfo(skb)->frags[0];
 	for (;;) {
-		sum += skb_frag_size(++frag);
+		sum += skb_frag_size(frag++);
 
 		/* if sum is negative we failed to make sufficient progress */
 		if (sum < 0)
@@ -2655,7 +2654,7 @@ bool __i40e_chk_linearize(struct sk_buff *skb)
 		if (!--nr_frags)
 			break;
 
-		sum -= skb_frag_size(++stale);
+		sum -= skb_frag_size(stale++);
 	}
 
 	return false;

drivers/net/ethernet/intel/i40e/i40e_txrx.h

@@ -413,10 +413,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
  **/
 static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
 {
-	/* we can only support up to 8 data buffers for a single send */
-	if (likely(count <= I40E_MAX_BUFFER_TXD))
+	/* Both TSO and single send will work if count is less than 8 */
+	if (likely(count < I40E_MAX_BUFFER_TXD))
 		return false;
 
-	return __i40e_chk_linearize(skb);
+	if (skb_is_gso(skb))
+		return __i40e_chk_linearize(skb);
+
+	/* we can support up to 8 data buffers for a single send */
+	return count != I40E_MAX_BUFFER_TXD;
 }
 #endif /* _I40E_TXRX_H_ */

drivers/net/ethernet/intel/i40evf/i40e_txrx.c

@@ -1796,35 +1796,34 @@ static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
 }
 
 /**
- * __i40evf_chk_linearize - Check if there are more than 8 fragments per packet
+ * __i40evf_chk_linearize - Check if there are more than 8 buffers per packet
  * @skb:      send buffer
  *
- * Note: Our HW can't scatter-gather more than 8 fragments to build
- * a packet on the wire and so we need to figure out the cases where we
- * need to linearize the skb.
+ * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
+ * and so we need to figure out the cases where we need to linearize the skb.
+ *
+ * For TSO we need to count the TSO header and segment payload separately.
+ * As such we need to check cases where we have 7 fragments or more as we
+ * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
+ * the segment payload in the first descriptor, and another 7 for the
+ * fragments.
  **/
 bool __i40evf_chk_linearize(struct sk_buff *skb)
 {
 	const struct skb_frag_struct *frag, *stale;
-	int gso_size, nr_frags, sum;
-
-	/* check to see if TSO is enabled, if so we may get a repreive */
-	gso_size = skb_shinfo(skb)->gso_size;
-	if (unlikely(!gso_size))
-		return true;
+	int nr_frags, sum;
 
-	/* no need to check if number of frags is less than 8 */
+	/* no need to check if number of frags is less than 7 */
 	nr_frags = skb_shinfo(skb)->nr_frags;
-	if (nr_frags < I40E_MAX_BUFFER_TXD)
+	if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
 		return false;
 
 	/* We need to walk through the list and validate that each group
 	 * of 6 fragments totals at least gso_size.  However we don't need
-	 * to perform such validation on the first or last 6 since the first
-	 * 6 cannot inherit any data from a descriptor before them, and the
-	 * last 6 cannot inherit any data from a descriptor after them.
+	 * to perform such validation on the last 6 since the last 6 cannot
+	 * inherit any data from a descriptor after them.
 	 */
-	nr_frags -= I40E_MAX_BUFFER_TXD - 1;
+	nr_frags -= I40E_MAX_BUFFER_TXD - 2;
 	frag = &skb_shinfo(skb)->frags[0];
 
 	/* Initialize size to the negative value of gso_size minus 1.  We
@@ -1833,21 +1832,21 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
 	 * descriptors for a single transmit as the header and previous
 	 * fragment are already consuming 2 descriptors.
 	 */
-	sum = 1 - gso_size;
+	sum = 1 - skb_shinfo(skb)->gso_size;
 
-	/* Add size of frags 1 through 5 to create our initial sum */
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
-	sum += skb_frag_size(++frag);
+	/* Add size of frags 0 through 4 to create our initial sum */
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
+	sum += skb_frag_size(frag++);
 
 	/* Walk through fragments adding latest fragment, testing it, and
 	 * then removing stale fragments from the sum.
 	 */
 	stale = &skb_shinfo(skb)->frags[0];
 	for (;;) {
-		sum += skb_frag_size(++frag);
+		sum += skb_frag_size(frag++);
 
 		/* if sum is negative we failed to make sufficient progress */
 		if (sum < 0)
@@ -1857,7 +1856,7 @@ bool __i40evf_chk_linearize(struct sk_buff *skb)
 		if (!--nr_frags)
 			break;
 
-		sum -= skb_frag_size(++stale);
+		sum -= skb_frag_size(stale++);
 	}
 
 	return false;

drivers/net/ethernet/intel/i40evf/i40e_txrx.h

@@ -395,10 +395,14 @@ static inline int i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
  **/
 static inline bool i40e_chk_linearize(struct sk_buff *skb, int count)
 {
-	/* we can only support up to 8 data buffers for a single send */
-	if (likely(count <= I40E_MAX_BUFFER_TXD))
+	/* Both TSO and single send will work if count is less than 8 */
+	if (likely(count < I40E_MAX_BUFFER_TXD))
 		return false;
 
-	return __i40evf_chk_linearize(skb);
+	if (skb_is_gso(skb))
+		return __i40evf_chk_linearize(skb);
+
+	/* we can support up to 8 data buffers for a single send */
+	return count != I40E_MAX_BUFFER_TXD;
 }
 #endif /* _I40E_TXRX_H_ */