Commit 412d070b authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly save/restore PMUSERNR_EL0 when host userspace is using
     PMU counters directly

   - Fix GICv2 emulation on GICv3 after the locking rework

   - Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
     document why

  Generic:

   - Avoid setting page table entries pointing to a deleted memslot if a
     host page table entry is changed concurrently with the deletion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Avoid illegal stage2 mapping on invalid memory slot
  KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
  KVM: arm64: Restore GICv2-on-GICv3 functionality
  KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
  KVM: arm64: PMU: Restore the host's PMUSERENR_EL0
parents e7758c0d 2623b3dc
......@@ -222,6 +222,11 @@ static inline bool kvm_pmu_counter_deferred(struct perf_event_attr *attr)
return false;
}
static inline bool kvm_set_pmuserenr(u64 val)
{
return false;
}
/* PMU Version in DFR Register */
#define ARMV8_PMU_DFR_VER_NI 0
#define ARMV8_PMU_DFR_VER_V3P4 0x5
......
......@@ -699,6 +699,8 @@ struct kvm_vcpu_arch {
#define SYSREGS_ON_CPU __vcpu_single_flag(sflags, BIT(4))
/* Software step state is Active-pending */
#define DBG_SS_ACTIVE_PENDING __vcpu_single_flag(sflags, BIT(5))
/* PMUSERENR for the guest EL0 is on physical CPU */
#define PMUSERENR_ON_CPU __vcpu_single_flag(sflags, BIT(6))
/* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
......@@ -1065,9 +1067,14 @@ void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu);
#ifdef CONFIG_KVM
void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr);
void kvm_clr_pmu_events(u32 clr);
bool kvm_set_pmuserenr(u64 val);
#else
static inline void kvm_set_pmu_events(u32 set, struct perf_event_attr *attr) {}
static inline void kvm_clr_pmu_events(u32 clr) {}
static inline bool kvm_set_pmuserenr(u64 val)
{
return false;
}
#endif
void kvm_vcpu_load_sysregs_vhe(struct kvm_vcpu *vcpu);
......
......@@ -82,8 +82,14 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
* EL1 instead of being trapped to EL2.
*/
if (kvm_arm_support_pmu_v3()) {
struct kvm_cpu_context *hctxt;
write_sysreg(0, pmselr_el0);
hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
ctxt_sys_reg(hctxt, PMUSERENR_EL0) = read_sysreg(pmuserenr_el0);
write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
vcpu_set_flag(vcpu, PMUSERENR_ON_CPU);
}
vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
......@@ -106,8 +112,13 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2);
write_sysreg(0, hstr_el2);
if (kvm_arm_support_pmu_v3())
write_sysreg(0, pmuserenr_el0);
if (kvm_arm_support_pmu_v3()) {
struct kvm_cpu_context *hctxt;
hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
vcpu_clear_flag(vcpu, PMUSERENR_ON_CPU);
}
if (cpus_have_final_cap(ARM64_SME)) {
sysreg_clear_set_s(SYS_HFGRTR_EL2, 0,
......
......@@ -92,14 +92,28 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
}
NOKPROBE_SYMBOL(__deactivate_traps);
/*
* Disable IRQs in {activate,deactivate}_traps_vhe_{load,put}() to
* prevent a race condition between context switching of PMUSERENR_EL0
* in __{activate,deactivate}_traps_common() and IPIs that attempts to
* update PMUSERENR_EL0. See also kvm_set_pmuserenr().
*/
void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
{
unsigned long flags;
local_irq_save(flags);
__activate_traps_common(vcpu);
local_irq_restore(flags);
}
void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
{
unsigned long flags;
local_irq_save(flags);
__deactivate_traps_common(vcpu);
local_irq_restore(flags);
}
static const exit_handler_fn hyp_exit_handlers[] = {
......
......@@ -700,7 +700,25 @@ static struct arm_pmu *kvm_pmu_probe_armpmu(void)
mutex_lock(&arm_pmus_lock);
cpu = smp_processor_id();
/*
* It is safe to use a stale cpu to iterate the list of PMUs so long as
* the same value is used for the entirety of the loop. Given this, and
* the fact that no percpu data is used for the lookup there is no need
* to disable preemption.
*
* It is still necessary to get a valid cpu, though, to probe for the
* default PMU instance as userspace is not required to specify a PMU
* type. In order to uphold the preexisting behavior KVM selects the
* PMU instance for the core where the first call to the
* KVM_ARM_VCPU_PMU_V3_CTRL attribute group occurs. A dependent use case
* would be a user with disdain of all things big.LITTLE that affines
* the VMM to a particular cluster of cores.
*
* In any case, userspace should just do the sane thing and use the UAPI
* to select a PMU type directly. But, be wary of the baggage being
* carried here.
*/
cpu = raw_smp_processor_id();
list_for_each_entry(entry, &arm_pmus, entry) {
tmp = entry->arm_pmu;
......
......@@ -209,3 +209,30 @@ void kvm_vcpu_pmu_restore_host(struct kvm_vcpu *vcpu)
kvm_vcpu_pmu_enable_el0(events_host);
kvm_vcpu_pmu_disable_el0(events_guest);
}
/*
* With VHE, keep track of the PMUSERENR_EL0 value for the host EL0 on the pCPU
* where PMUSERENR_EL0 for the guest is loaded, since PMUSERENR_EL0 is switched
* to the value for the guest on vcpu_load(). The value for the host EL0
* will be restored on vcpu_put(), before returning to userspace.
* This isn't necessary for nVHE, as the register is context switched for
* every guest enter/exit.
*
* Return true if KVM takes care of the register. Otherwise return false.
*/
bool kvm_set_pmuserenr(u64 val)
{
struct kvm_cpu_context *hctxt;
struct kvm_vcpu *vcpu;
if (!kvm_arm_support_pmu_v3() || !has_vhe())
return false;
vcpu = kvm_get_running_vcpu();
if (!vcpu || !vcpu_get_flag(vcpu, PMUSERENR_ON_CPU))
return false;
hctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
ctxt_sys_reg(hctxt, PMUSERENR_EL0) = val;
return true;
}
......@@ -446,6 +446,7 @@ int vgic_lazy_init(struct kvm *kvm)
int kvm_vgic_map_resources(struct kvm *kvm)
{
struct vgic_dist *dist = &kvm->arch.vgic;
enum vgic_type type;
gpa_t dist_base;
int ret = 0;
......@@ -460,10 +461,13 @@ int kvm_vgic_map_resources(struct kvm *kvm)
if (!irqchip_in_kernel(kvm))
goto out;
if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2)
if (dist->vgic_model == KVM_DEV_TYPE_ARM_VGIC_V2) {
ret = vgic_v2_map_resources(kvm);
else
type = VGIC_V2;
} else {
ret = vgic_v3_map_resources(kvm);
type = VGIC_V3;
}
if (ret) {
__kvm_vgic_destroy(kvm);
......@@ -473,8 +477,7 @@ int kvm_vgic_map_resources(struct kvm *kvm)
dist_base = dist->vgic_dist_base;
mutex_unlock(&kvm->arch.config_lock);
ret = vgic_register_dist_iodev(kvm, dist_base,
kvm_vgic_global_state.type);
ret = vgic_register_dist_iodev(kvm, dist_base, type);
if (ret) {
kvm_err("Unable to register VGIC dist MMIO regions\n");
kvm_vgic_destroy(kvm);
......
......@@ -677,9 +677,25 @@ static inline u32 armv8pmu_getreset_flags(void)
return value;
}
static void update_pmuserenr(u64 val)
{
lockdep_assert_irqs_disabled();
/*
* The current PMUSERENR_EL0 value might be the value for the guest.
* If that's the case, have KVM keep tracking of the register value
* for the host EL0 so that KVM can restore it before returning to
* the host EL0. Otherwise, update the register now.
*/
if (kvm_set_pmuserenr(val))
return;
write_pmuserenr(val);
}
static void armv8pmu_disable_user_access(void)
{
write_pmuserenr(0);
update_pmuserenr(0);
}
static void armv8pmu_enable_user_access(struct arm_pmu *cpu_pmu)
......@@ -695,8 +711,7 @@ static void armv8pmu_enable_user_access(struct arm_pmu *cpu_pmu)
armv8pmu_write_evcntr(i, 0);
}
write_pmuserenr(0);
write_pmuserenr(ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_CR);
update_pmuserenr(ARMV8_PMU_USERENR_ER | ARMV8_PMU_USERENR_CR);
}
static void armv8pmu_enable_event(struct perf_event *event)
......
......@@ -686,6 +686,24 @@ static __always_inline int kvm_handle_hva_range_no_flush(struct mmu_notifier *mn
return __kvm_handle_hva_range(kvm, &range);
}
static bool kvm_change_spte_gfn(struct kvm *kvm, struct kvm_gfn_range *range)
{
/*
* Skipping invalid memslots is correct if and only change_pte() is
* surrounded by invalidate_range_{start,end}(), which is currently
* guaranteed by the primary MMU. If that ever changes, KVM needs to
* unmap the memslot instead of skipping the memslot to ensure that KVM
* doesn't hold references to the old PFN.
*/
WARN_ON_ONCE(!READ_ONCE(kvm->mn_active_invalidate_count));
if (range->slot->flags & KVM_MEMSLOT_INVALID)
return false;
return kvm_set_spte_gfn(kvm, range);
}
static void kvm_mmu_notifier_change_pte(struct mmu_notifier *mn,
struct mm_struct *mm,
unsigned long address,
......@@ -707,7 +725,7 @@ static void kvm_mmu_notifier_change_pte(struct mmu_notifier *mn,
if (!READ_ONCE(kvm->mmu_invalidate_in_progress))
return;
kvm_handle_hva_range(mn, address, address + 1, pte, kvm_set_spte_gfn);
kvm_handle_hva_range(mn, address, address + 1, pte, kvm_change_spte_gfn);
}
void kvm_mmu_invalidate_begin(struct kvm *kvm, unsigned long start,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment