Commit 4132a577 authored by Lukas Wunner's avatar Lukas Wunner Committed by Bjorn Helgaas

PCI: Afford direct-complete to devices with non-standard PM

There are devices not power-manageable by the platform, but still able to
runtime suspend to D3cold with a non-standard mechanism.  One example is
laptop hybrid graphics where the discrete GPU and its built-in HDA
controller are power-managed either with a _DSM (AMD PowerXpress, Nvidia
Optimus) or a separate gmux controller (MacBook Pro).  Another example is
Thunderbolt on Macs which is power-managed with custom ACPI methods.

When putting the system to sleep, we currently handle such devices
improperly by transitioning them from D3cold to D3hot (the default power
state defined at the top of pci_target_state()).  This wastes energy and
prolongs the suspend sequence (powering up the Thunderbolt controller takes
2 seconds).

Avoid that by assuming that a non-standard PM mechanism is at work if the
device is not platform-power-manageable but currently in D3cold.

If the device is wakeup enabled, we might still have to wake it up from
D3cold if PME cannot be signaled from that power state.

The check for devices without PM capability comes before the check for
D3cold since such devices could in theory also be powered down by
non-standard means and should then be afforded direct-complete as well.
Signed-off-by: default avatarLukas Wunner <lukas@wunner.de>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Acked-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
parent 29b4817d
......@@ -1959,9 +1959,22 @@ static pci_power_t pci_target_state(struct pci_dev *dev)
default:
target_state = state;
}
} else if (!dev->pm_cap) {
return target_state;
}
if (!dev->pm_cap)
target_state = PCI_D0;
} else if (device_may_wakeup(&dev->dev)) {
/*
* If the device is in D3cold even though it's not power-manageable by
* the platform, it may have been powered down by non-standard means.
* Best to let it slumber.
*/
if (dev->current_state == PCI_D3cold)
target_state = PCI_D3cold;
if (device_may_wakeup(&dev->dev)) {
/*
* Find the deepest state from which the device can generate
* wake-up events, make it the target state and enable device
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment