Commit 418bb3a6 authored by Biju Das's avatar Biju Das Committed by Laurent Pinchart

drm: rcar-du: rzg2l_mipi_dsi: Enhance device lanes check

Enhance device lanes check by reading TXSETR register at probe(),
and enforced in rzg2l_mipi_dsi_host_attach().

As per HW manual, we can read TXSETR register only after
DPHY initialization.
Suggested-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: default avatarBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
parent 7a043f97
......@@ -171,6 +171,11 @@ static void rzg2l_mipi_dsi_link_write(struct rzg2l_mipi_dsi *dsi, u32 reg, u32 d
iowrite32(data, dsi->mmio + LINK_REG_OFFSET + reg);
}
static u32 rzg2l_mipi_dsi_phy_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
{
return ioread32(dsi->mmio + reg);
}
static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
{
return ioread32(dsi->mmio + LINK_REG_OFFSET + reg);
......@@ -180,19 +185,11 @@ static u32 rzg2l_mipi_dsi_link_read(struct rzg2l_mipi_dsi *dsi, u32 reg)
* Hardware Setup
*/
static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
const struct drm_display_mode *mode)
static int rzg2l_mipi_dsi_dphy_init(struct rzg2l_mipi_dsi *dsi,
unsigned long hsfreq)
{
const struct rzg2l_mipi_dsi_timings *dphy_timings;
unsigned long hsfreq;
unsigned int i, bpp;
u32 txsetr;
u32 clstptsetr;
u32 lptrnstsetr;
u32 clkkpt;
u32 clkbfht;
u32 clkstpt;
u32 golpbkt;
unsigned int i;
u32 dphyctrl0;
u32 dphytim0;
u32 dphytim1;
......@@ -200,19 +197,6 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
u32 dphytim3;
int ret;
/*
* Relationship between hsclk and vclk must follow
* vclk * bpp = hsclk * 8 * lanes
* where vclk: video clock (Hz)
* bpp: video pixel bit depth
* hsclk: DSI HS Byte clock frequency (Hz)
* lanes: number of data lanes
*
* hsclk(bit) = hsclk(byte) * 8
*/
bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes);
/* All DSI global operation timings are set with recommended setting */
for (i = 0; i < ARRAY_SIZE(rzg2l_mipi_dsi_global_timings); ++i) {
dphy_timings = &rzg2l_mipi_dsi_global_timings[i];
......@@ -220,12 +204,6 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
break;
}
ret = pm_runtime_resume_and_get(dsi->dev);
if (ret < 0)
return ret;
clk_set_rate(dsi->vclk, mode->clock * 1000);
/* Initializing DPHY before accessing LINK */
dphyctrl0 = DSIDPHYCTRL0_CAL_EN_HSRX_OFS | DSIDPHYCTRL0_CMN_MASTER_EN |
DSIDPHYCTRL0_RE_VDD_DETVCCQLV18 | DSIDPHYCTRL0_EN_BGR;
......@@ -259,10 +237,62 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
ret = reset_control_deassert(dsi->rstc);
if (ret < 0)
goto err_pm_put;
return ret;
udelay(1);
return 0;
}
static void rzg2l_mipi_dsi_dphy_exit(struct rzg2l_mipi_dsi *dsi)
{
u32 dphyctrl0;
dphyctrl0 = rzg2l_mipi_dsi_phy_read(dsi, DSIDPHYCTRL0);
dphyctrl0 &= ~(DSIDPHYCTRL0_EN_LDO1200 | DSIDPHYCTRL0_EN_BGR);
rzg2l_mipi_dsi_phy_write(dsi, DSIDPHYCTRL0, dphyctrl0);
reset_control_assert(dsi->rstc);
}
static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
const struct drm_display_mode *mode)
{
unsigned long hsfreq;
unsigned int bpp;
u32 txsetr;
u32 clstptsetr;
u32 lptrnstsetr;
u32 clkkpt;
u32 clkbfht;
u32 clkstpt;
u32 golpbkt;
int ret;
/*
* Relationship between hsclk and vclk must follow
* vclk * bpp = hsclk * 8 * lanes
* where vclk: video clock (Hz)
* bpp: video pixel bit depth
* hsclk: DSI HS Byte clock frequency (Hz)
* lanes: number of data lanes
*
* hsclk(bit) = hsclk(byte) * 8
*/
bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
hsfreq = (mode->clock * bpp * 8) / (8 * dsi->lanes);
ret = pm_runtime_resume_and_get(dsi->dev);
if (ret < 0)
return ret;
clk_set_rate(dsi->vclk, mode->clock * 1000);
ret = rzg2l_mipi_dsi_dphy_init(dsi, hsfreq);
if (ret < 0)
goto err_phy;
/* Enable Data lanes and Clock lanes */
txsetr = TXSETR_DLEN | TXSETR_NUMLANEUSE(dsi->lanes - 1) | TXSETR_CLEN;
rzg2l_mipi_dsi_link_write(dsi, TXSETR, txsetr);
......@@ -301,7 +331,8 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
return 0;
err_pm_put:
err_phy:
rzg2l_mipi_dsi_dphy_exit(dsi);
pm_runtime_put(dsi->dev);
return ret;
......@@ -309,7 +340,7 @@ static int rzg2l_mipi_dsi_startup(struct rzg2l_mipi_dsi *dsi,
static void rzg2l_mipi_dsi_stop(struct rzg2l_mipi_dsi *dsi)
{
reset_control_assert(dsi->rstc);
rzg2l_mipi_dsi_dphy_exit(dsi);
pm_runtime_put(dsi->dev);
}
......@@ -666,7 +697,9 @@ static const struct dev_pm_ops rzg2l_mipi_pm_ops = {
static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
{
unsigned int num_data_lanes;
struct rzg2l_mipi_dsi *dsi;
u32 txsetr;
int ret;
dsi = devm_kzalloc(&pdev->dev, sizeof(*dsi), GFP_KERNEL);
......@@ -681,7 +714,7 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
return dev_err_probe(dsi->dev, ret,
"missing or invalid data-lanes property\n");
dsi->num_data_lanes = ret;
num_data_lanes = ret;
dsi->mmio = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(dsi->mmio))
......@@ -710,6 +743,24 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
pm_runtime_enable(dsi->dev);
ret = pm_runtime_resume_and_get(dsi->dev);
if (ret < 0)
goto err_pm_disable;
/*
* TXSETR register can be read only after DPHY init. But during probe
* mode->clock and format are not available. So initialize DPHY with
* timing parameters for 80Mbps.
*/
ret = rzg2l_mipi_dsi_dphy_init(dsi, 80000);
if (ret < 0)
goto err_phy;
txsetr = rzg2l_mipi_dsi_link_read(dsi, TXSETR);
dsi->num_data_lanes = min(((txsetr >> 16) & 3) + 1, num_data_lanes);
rzg2l_mipi_dsi_dphy_exit(dsi);
pm_runtime_put(dsi->dev);
/* Initialize the DRM bridge. */
dsi->bridge.funcs = &rzg2l_mipi_dsi_bridge_ops;
dsi->bridge.of_node = dsi->dev->of_node;
......@@ -723,6 +774,9 @@ static int rzg2l_mipi_dsi_probe(struct platform_device *pdev)
return 0;
err_phy:
rzg2l_mipi_dsi_dphy_exit(dsi);
pm_runtime_put(dsi->dev);
err_pm_disable:
pm_runtime_disable(dsi->dev);
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment