Commit 41a328b9 authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "A bit larger set than usual, unfortunately -- I've been sitting on
  them longer than I meant to so it's really more like 2 -rc pull
  requests in one, volume-wise.

  Nearly everything is fixes for fallout from the merge window, or other
  fixes for bugs.  The one exception is the highbank L2-enablement
  patch, but it was contained enough that I picked it up anyway:

   - i.MX fixes, mostly for clock and pinctrl changes
   - OMAP fixes, mostly PM-related
   - A patch to enable L2 on highbank
   - A couple of fixes for PXA, Kirkwood, Versatile"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (30 commits)
  ARM: Kirkwood: Fix clk problems modular ethernet driver
  arm: versatile: fix and enable PCI I/O space
  ARM: highbank: Add smc calls to enable/disable the L2
  ARM i.MX imx21ads: Fix overlapping static i/o mappings
  ARM: imx6: exit coherency when shutting down a cpu
  ARM: mx51: Add pinctrl_provide_dummies()
  ARM: mx31: Add pinctrl_provide_dummies()
  ARM: OMAP2+: Fix compile for CONFIG_TIDSPBRIDGE platform init code
  ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set
  ARM: OMAP: Fix MMC_OMAP build when only MMC_OMAP_HS is selected
  OMAP2+: UART: Add mechanism to probe uart pins and configure rx wakeup
  ARM: mmp: fix missing cascade_irq in irq handler
  ARM: dts: update memory size on brownstone
  ARM i.MX27 Visstrim M10: fix gpio handling.
  ARM i.MX53: Fix PLL4 base address
  ARM i.MX pllv2: make round_rate accurate
  ARM i.MX pllv2: use standard register set unconditionally
  ARM: OMAP: Fix lis3lv02d accelerometer to use gpio_to_irq
  ARM: imx: only call l2x0_init if it's available
  ARM: imx: only specify i2c device type once
  ...
parents 485802a6 128789a8
......@@ -293,6 +293,7 @@ config ARCH_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
......
......@@ -11,7 +11,7 @@
/include/ "mmp2.dtsi"
/ {
model = "Marvell MMP2 Aspenite Development Board";
model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
......@@ -19,7 +19,7 @@ chosen {
};
memory {
reg = <0x00000000 0x04000000>;
reg = <0x00000000 0x08000000>;
};
soc {
......
obj-y := clock.o highbank.o system.o
obj-y := clock.o highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
......
......@@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void);
static inline void highbank_lluart_map_io(void) {}
#endif
extern void highbank_smc1(int fn, int arg);
......@@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = {
{}
};
#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
/* Disable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x0);
}
#endif
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
outer_cache.disable = highbank_l2x0_disable;
#endif
}
static void __init highbank_timer_init(void)
......
/*
* Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
* Copyright 2012 Calxeda, Inc.
*
* This program is free software,you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
/*
* This is common routine to manage secure monitor API
* used to modify the PL310 secure registers.
* 'r0' contains the value to be modified and 'r12' contains
* the monitor API number.
* Function signature : void highbank_smc1(u32 fn, u32 arg)
*/
ENTRY(highbank_smc1)
stmfd sp!, {r4-r11, lr}
mov r12, r0
mov r0, r1
dsb
smc #0
ldmfd sp!, {r4-r11, pc}
ENDPROC(highbank_smc1)
......@@ -477,6 +477,7 @@ config MACH_MX31_3DS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
......
......@@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
MX1_TIM1_INT);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
......@@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
MX21_INT_GPT1);
mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
return 0;
}
......@@ -243,6 +243,6 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
......@@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
MX27_INT_GPT1);
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
......
......@@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
MX31_INT_GPT);
mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
......@@ -267,11 +267,9 @@ int __init mx35_clocks_init()
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
MX35_INT_GPT);
mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
......
......@@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
......@@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
......@@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
MX51_INT_GPT);
mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
......@@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
MX53_INT_GPT);
mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
......
......@@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
static const char * const clks_init_on[] __initconst = {
"mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
};
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
......@@ -161,11 +157,14 @@ enum mx6q_clks {
static struct clk *clk[clk_max];
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, mmdc_ch1_axi,
};
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
......@@ -424,21 +423,14 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
c = clk_get_sys(clks_init_on[i], NULL);
if (IS_ERR(c)) {
pr_err("%s: failed to get clk %s", __func__,
clks_init_on[i]);
return PTR_ERR(c);
}
clk_prepare_enable(c);
}
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
mxc_timer_init(NULL, base, irq);
mxc_timer_init(base, irq);
return 0;
}
......@@ -74,30 +74,15 @@ struct clk_pllv2 {
void __iomem *base;
};
static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
void __iomem *pllbase;
unsigned long dbl;
s64 temp;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
pllbase = pll->base;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
if (pll_hfsm == 0) {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
} else {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
}
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
......@@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
return temp;
}
static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
pllbase = pll->base;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
}
static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
{
u32 reg;
void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
unsigned long pll_hfsm, dp_ctl;
pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
......@@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
pdf--;
temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
do_div(temp64, quad_parent_rate/1000000);
temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
reg = mfi << 4 | pdf;
*dp_op = reg;
*dp_mfd = mfd;
*dp_mfn = mfn;
return 0;
}
static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pllv2 *pll = to_clk_pllv2(hw);
void __iomem *pllbase;
u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
int ret;
pllbase = pll->base;
ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
if (ret)
return ret;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
if (pll_hfsm == 0) {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
} else {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
}
__raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
__raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
__raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
......@@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
return rate;
u32 dp_op, dp_mfd, dp_mfn;
__clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
......
......@@ -23,7 +23,7 @@
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
......
......@@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
......@@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
return 1;
}
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
flush_cache_all();
asm volatile(
"mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, %3\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile(
"mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
/*
* platform-specific code to shutdown a CPU
*
......@@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
flush_cache_all();
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
......
......@@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
.type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
......
......@@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
.type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
......
......@@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = {
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
......@@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = {
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
static const struct gpio visstrim_m10_gpios[] __initconst = {
{
.gpio = TVP5150_RSTN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
.label = "tvp5150_rstn",
},
{
.gpio = TVP5150_PWDN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "tvp5150_pwdn",
},
{
.gpio = OTG_PHY_CS_GPIO,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "usbotg_cs",
},
};
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
......@@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void)
struct platform_device *pdev;
int dma;
/* Initialize tvp5150 gpios */
mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
gpio_set_value(TVP5150_RSTN, 1);
gpio_set_value(TVP5150_PWDN, 0);
ndelay(1);
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
......@@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
......@@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
ret = gpio_request_array(visstrim_m10_gpios,
ARRAY_SIZE(visstrim_m10_gpios));
if (ret)
pr_err("Failed to request gpios (%d)\n", ret);
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
......
......@@ -32,7 +32,7 @@
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
#define MX21ADS_MMIO_SIZE SZ_16M
#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
......
......@@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
void __init imx3_init_l2x0(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
......@@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void)
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
#endif
}
#ifdef CONFIG_SOC_IMX31
......@@ -179,6 +181,8 @@ void __init imx31_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
......
......@@ -202,6 +202,8 @@ void __init imx51_soc_init(void)
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
pinctrl_provide_dummies();
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
......
......@@ -193,9 +193,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
bit_idx, 0, &gating_lock, fn);
}
static struct clk *ge0, *ge1;
void __init kirkwood_clk_init(void)
{
struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
......@@ -257,6 +259,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
/* The interface forgets the MAC address assigned by u-boot if
the clock is turned off, so claim the clk now. */
clk_prepare_enable(ge0);
}
......@@ -268,6 +273,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
clk_prepare_enable(ge1);
}
......
......@@ -241,6 +241,7 @@ void __init mmp2_init_icu(void)
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
......@@ -249,6 +250,7 @@ void __init mmp2_init_icu(void)
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
......@@ -257,6 +259,7 @@ void __init mmp2_init_icu(void)
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
......@@ -265,6 +268,7 @@ void __init mmp2_init_icu(void)
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
......@@ -273,6 +277,7 @@ void __init mmp2_init_icu(void)
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
......@@ -281,6 +286,7 @@ void __init mmp2_init_icu(void)
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
......@@ -289,6 +295,7 @@ void __init mmp2_init_icu(void)
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
......
......@@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
......@@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
......@@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void)
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
......
......@@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void)
struct omap_clk *c;
u32 cpu_clkflg = 0;
if (cpu_is_omap3517()) {
if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
......
......@@ -20,6 +20,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/memblock.h>
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
......
......@@ -246,6 +246,17 @@ void __init omap3xxx_check_features(void)
omap_features |= OMAP3_HAS_SDRC;
/*
* am35x fixups:
* - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
* reserved and therefore return 0 when read. Unfortunately,
* OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
* mean that a feature is present even though it isn't so clear
* the incorrectly set feature bits.
*/
if (soc_is_am35xx())
omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
......
......@@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
......
......@@ -217,8 +217,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
static int __init
omap_mux_get_by_name(const char *muxname,
int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
......
......@@ -59,6 +59,7 @@
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
......@@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
int omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux);
#else
static inline int omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
return 0;
}
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
......
......@@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
WARN_ON(1);
return IRQ_HANDLED;
}
......
......@@ -724,6 +724,7 @@ int __init omap3_pm_init(void)
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
......
......@@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
......@@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
static int __init omap3xxx_prcm_init(void)
{
if (cpu_is_omap34xx())
return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
return 0;
int ret = 0;
if (cpu_is_omap34xx()) {
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
}
return ret;
}
subsys_initcall(omap3xxx_prcm_init);
......@@ -57,6 +57,7 @@ struct omap_uart_state {
struct list_head node;
struct omap_hwmod *oh;
struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
......@@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
static void __init
omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
uart->default_omap_uart_pads[0].name = rx_pad_name;
uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
OMAP_DEVICE_PAD_WAKEUP;
uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
OMAP_MUX_MODE0;
uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
uart->default_omap_uart_pads[1].name = tx_pad_name;
uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
OMAP_MUX_MODE0;
bdata->pads = uart->default_omap_uart_pads;
bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
}
static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
char *rx_fmt, *tx_fmt;
int uart_nr = bdata->id + 1;
if (bdata->id != 2) {
rx_fmt = "uart%d_rx.uart%d_rx";
tx_fmt = "uart%d_tx.uart%d_tx";
} else {
rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
}
snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
uart_nr, uart_nr);
snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
uart_nr, uart_nr);
if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
omap_mux_get_by_name
(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
u16 tx_mode, rx_mode;
tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
/*
* Check if uart is used in default tx/rx mode i.e. in mux mode0
* if yes then configure rx pin for wake up capability
*/
if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
omap_serial_fill_uart_tx_rx_pads(bdata, uart);
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
}
#endif
static char *cmdline_find_option(char *str)
......@@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info)
bdata.pads = NULL;
bdata.pads_cnt = 0;
if (cpu_is_omap44xx() || cpu_is_omap34xx())
omap_serial_fill_default_pads(&bdata);
omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
......
......@@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = {
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
},
#if 0
{
.virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
.length = SZ_16M,
.type = MT_DEVICE
}, {
.virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
.length = SZ_16M,
.virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
.pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
.length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
#endif
};
void __init versatile_map_io(void)
......
......@@ -29,8 +29,9 @@
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
/* macro to get at IO space when running virtually */
/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
......
/*
* arch/arm/mach-versatile/include/mach/io.h
*
* Copyright (C) 2003 ARM Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#define PCIO_BASE 0xeb000000ul
#define __io(a) ((a) + PCIO_BASE)
#endif
......@@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = {
.write = versatile_write_config,
};
static struct resource io_port = {
.name = "PCI",
.start = 0,
.end = IO_SPACE_LIMIT,
.flags = IORESOURCE_IO,
};
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
.flags = IORESOURCE_IO,
.flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
......@@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
"memory region (%d)\n", ret);
goto out;
}
ret = request_resource(&ioport_resource, &io_port);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate I/O "
"port region (%d)\n", ret);
goto out;
}
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
......@@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys)
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
......@@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys)
if (nr == 0) {
sys->mem_offset = 0;
sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
......
......@@ -50,6 +50,7 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
......@@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk)
return 0;
}
void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
void __init epit_timer_init(void __iomem *base, int irq)
{
struct clk *timer_clk;
timer_clk = clk_get_sys("imx-epit.0", NULL);
if (IS_ERR(timer_clk)) {
pr_err("i.MX epit: unable to get clk\n");
return;
}
clk_prepare_enable(timer_clk);
timer_base = base;
......
......@@ -54,8 +54,8 @@ extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern void epit_timer_init(void __iomem *base, int irq);
extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
......
......@@ -58,6 +58,7 @@
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
......@@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
return 0;
}
void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
struct clk *timer_clk;
struct clk *timer_ipg_clk;
if (!timer_clk) {
timer_clk = clk_get_sys("imx-gpt.0", "per");
if (IS_ERR(timer_clk)) {
pr_err("i.MX timer: unable to get clk\n");
return;
}
timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
if (!IS_ERR(timer_ipg_clk))
clk_prepare_enable(timer_ipg_clk);
timer_clk = clk_get_sys("imx-gpt.0", "per");
if (IS_ERR(timer_clk)) {
pr_err("i.MX timer: unable to get clk\n");
return;
}
timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
if (!IS_ERR(timer_ipg_clk))
clk_prepare_enable(timer_ipg_clk);
clk_prepare_enable(timer_clk);
timer_base = base;
......@@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
......
......@@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335)
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
* cpu_is_omap3505(): True for OMAP3505
* cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
......@@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
IS_OMAP_TYPE(3505, 0x3517)
IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
......@@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
#define cpu_is_omap3503() 0
#define cpu_is_omap3515() 0
#define cpu_is_omap3525() 0
#define cpu_is_omap3530() 0
#define cpu_is_omap3505() 0
#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
......@@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
# undef cpu_is_omap3503
# undef cpu_is_omap3515
# undef cpu_is_omap3525
# undef cpu_is_omap3530
# undef cpu_is_omap3505
# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
......@@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517)
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
# define cpu_is_omap3503() (cpu_is_omap3430() && \
(!omap3_has_iva()) && \
(!omap3_has_sgx()))
# define cpu_is_omap3515() (cpu_is_omap3430() && \
(!omap3_has_iva()) && \
(omap3_has_sgx()))
# define cpu_is_omap3525() (cpu_is_omap3430() && \
(!omap3_has_sgx()) && \
(omap3_has_iva()))
# define cpu_is_omap3530() (cpu_is_omap3430())
# define cpu_is_omap3517() is_omap3517()
# define cpu_is_omap3505() (cpu_is_omap3517() && \
!omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
......@@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
#define OMAP3517_CLASS 0x35170034
#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
......
......@@ -172,8 +172,7 @@ struct omap_mmc_platform_data {
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
......@@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment