Commit 4228c394 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by David S. Miller

make legacy ISA probe optional

There are very few ISA drivers left that rely on the static probing from
drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT
symbol, and drop the entire probe logic when that is disabled.

The 9 drivers that are called from Space.c are the same set that
calls netdev_boot_setup_check().
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5ea2f5ff
...@@ -606,4 +606,11 @@ config NET_FAILOVER ...@@ -606,4 +606,11 @@ config NET_FAILOVER
a VM with direct attached VF by failing over to the paravirtual a VM with direct attached VF by failing over to the paravirtual
datapath when the VF is unplugged. datapath when the VF is unplugged.
config NETDEV_LEGACY_INIT
bool
depends on ISA
help
Drivers that call netdev_boot_setup_check() should select this
symbol, everything else no longer needs it.
endif # NETDEVICES endif # NETDEVICES
...@@ -18,7 +18,8 @@ obj-$(CONFIG_MACVLAN) += macvlan.o ...@@ -18,7 +18,8 @@ obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_MII) += mii.o obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_NET) += loopback.o
obj-$(CONFIG_NETDEV_LEGACY_INIT) += Space.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-y += phy/ obj-y += phy/
obj-y += mdio/ obj-y += mdio/
......
...@@ -52,7 +52,9 @@ config LTPC ...@@ -52,7 +52,9 @@ config LTPC
config COPS config COPS
tristate "COPS LocalTalk PC support" tristate "COPS LocalTalk PC support"
depends on DEV_APPLETALK && (ISA || EISA) depends on DEV_APPLETALK && ISA
depends on NETDEVICES
select NETDEV_LEGACY_INIT
help help
This allows you to use COPS AppleTalk cards to connect to LocalTalk This allows you to use COPS AppleTalk cards to connect to LocalTalk
networks. You also need version 1.3.3 or later of the netatalk networks. You also need version 1.3.3 or later of the netatalk
......
...@@ -34,6 +34,7 @@ config EL3 ...@@ -34,6 +34,7 @@ config EL3
config 3C515 config 3C515
tristate "3c515 ISA \"Fast EtherLink\"" tristate "3c515 ISA \"Fast EtherLink\""
depends on ISA && ISA_DMA_API && !PPC32 depends on ISA && ISA_DMA_API && !PPC32
select NETDEV_LEGACY_INIT
help help
If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
network card, say Y here. network card, say Y here.
......
...@@ -102,6 +102,7 @@ config MCF8390 ...@@ -102,6 +102,7 @@ config MCF8390
config NE2000 config NE2000
tristate "NE2000/NE1000 support" tristate "NE2000/NE1000 support"
depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC) depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
select NETDEV_LEGACY_INIT if ISA
select CRC32 select CRC32
help help
If you have a network (Ethernet) card of this type, say Y here. If you have a network (Ethernet) card of this type, say Y here.
...@@ -169,6 +170,7 @@ config STNIC ...@@ -169,6 +170,7 @@ config STNIC
config ULTRA config ULTRA
tristate "SMC Ultra support" tristate "SMC Ultra support"
depends on ISA depends on ISA
select NETDEV_LEGACY_INIT
select CRC32 select CRC32
help help
If you have a network (Ethernet) card of this type, say Y here. If you have a network (Ethernet) card of this type, say Y here.
...@@ -186,6 +188,7 @@ config ULTRA ...@@ -186,6 +188,7 @@ config ULTRA
config WD80x3 config WD80x3
tristate "WD80*3 support" tristate "WD80*3 support"
depends on ISA depends on ISA
select NETDEV_LEGACY_INIT
select CRC32 select CRC32
help help
If you have a network (Ethernet) card of this type, say Y here. If you have a network (Ethernet) card of this type, say Y here.
......
...@@ -951,6 +951,7 @@ static int __init ne_init(void) ...@@ -951,6 +951,7 @@ static int __init ne_init(void)
} }
module_init(ne_init); module_init(ne_init);
#ifdef CONFIG_NETDEV_LEGACY_INIT
struct net_device * __init ne_probe(int unit) struct net_device * __init ne_probe(int unit)
{ {
int this_dev; int this_dev;
...@@ -991,6 +992,7 @@ struct net_device * __init ne_probe(int unit) ...@@ -991,6 +992,7 @@ struct net_device * __init ne_probe(int unit)
return ERR_PTR(-ENODEV); return ERR_PTR(-ENODEV);
} }
#endif
#endif /* MODULE */ #endif /* MODULE */
static void __exit ne_exit(void) static void __exit ne_exit(void)
......
...@@ -46,6 +46,7 @@ config AMD8111_ETH ...@@ -46,6 +46,7 @@ config AMD8111_ETH
config LANCE config LANCE
tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32 depends on ISA && ISA_DMA_API && !ARM && !PPC32
select NETDEV_LEGACY_INIT
help help
If you have a network (Ethernet) card of this type, say Y here. If you have a network (Ethernet) card of this type, say Y here.
Some LinkSys cards are of this type. Some LinkSys cards are of this type.
...@@ -132,6 +133,7 @@ config PCMCIA_NMCLAN ...@@ -132,6 +133,7 @@ config PCMCIA_NMCLAN
config NI65 config NI65
tristate "NI6510 support" tristate "NI6510 support"
depends on ISA && ISA_DMA_API && !ARM && !PPC32 depends on ISA && ISA_DMA_API && !ARM && !PPC32
select NETDEV_LEGACY_INIT
help help
If you have a network (Ethernet) card of this type, say Y here. If you have a network (Ethernet) card of this type, say Y here.
......
...@@ -26,6 +26,7 @@ config CS89x0_ISA ...@@ -26,6 +26,7 @@ config CS89x0_ISA
depends on ISA depends on ISA
depends on !PPC32 depends on !PPC32
depends on CS89x0_PLATFORM=n depends on CS89x0_PLATFORM=n
select NETDEV_LEGACY_INIT
select CS89x0 select CS89x0
help help
Support for CS89x0 chipset based Ethernet cards. If you have a Support for CS89x0 chipset based Ethernet cards. If you have a
......
...@@ -23,6 +23,7 @@ config SMC9194 ...@@ -23,6 +23,7 @@ config SMC9194
tristate "SMC 9194 support" tristate "SMC 9194 support"
depends on ISA depends on ISA
select CRC32 select CRC32
select NETDEV_LEGACY_INIT
help help
This is support for the SMC9xxx based Ethernet cards. Choose this This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or option if you have a DELL laptop with the docking station, or
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment