Commit 42976ad0 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Peter Anvin:
 "One (hopefully) last batch of x86 fixes.  You asked for the patch by
  patch justifications, so here they are:

      x86, MCE: Retract most UAPI exports

   This one unexports from userspace a bunch of definitions which should
   never have been exported.  We really don't want to create an
   accidental legacy here.

      x86, doc: Add a bootloader ID for OVMF

   This is a documentation-only patch, just recording the official
   assignment of a boot loader ID.

      x86: Do not leak kernel page mapping locations

   Security: avoid making it needlessly easy for user space to probe the
   kernel memory layout.

      x86/mm: Check if PUD is large when validating a kernel address

   Prevent failures using /proc/kcore when using 1G pages.

      x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems

   Works around a BIOS problem causing boot failures on affected hardware."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Check if PUD is large when validating a kernel address
  x86/apic: Work around boot failure on HP ProLiant DL980 G7 Server systems
  x86, doc: Add a bootloader ID for OVMF
  x86: Do not leak kernel page mapping locations
  x86, MCE: Retract most UAPI exports
parents ecf223fc 0ee364eb
......@@ -390,6 +390,7 @@ Protocol: 2.00+
F Special (0xFF = undefined)
10 Reserved
11 Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
12 OVMF UEFI virtualization stack
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
......
......@@ -3,6 +3,90 @@
#include <uapi/asm/mce.h>
/*
* Machine Check support for x86
*/
/* MCG_CAP register defines */
#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
#define MCG_EXT_CNT_SHIFT 16
#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
/* MCG_STATUS register defines */
#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
/* MCi_STATUS register defines */
#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
#define MCI_STATUS_AR (1ULL<<55) /* Action required */
#define MCACOD 0xffff /* MCA Error Code */
/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
#define MCACOD_SCRUBMSK 0xfff0
#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
#define MCACOD_DATA 0x0134 /* Data Load */
#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
/* MCi_MISC register defines */
#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
#define MCI_MISC_ADDR_PHYS 2 /* physical address */
#define MCI_MISC_ADDR_MEM 3 /* memory address */
#define MCI_MISC_ADDR_GENERIC 7 /* generic */
/* CTL2 register defines */
#define MCI_CTL2_CMCI_EN (1ULL << 30)
#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
#define MCJ_CTX_MASK 3
#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
#define MCJ_CTX_RANDOM 0 /* inject context: random */
#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
#define MCJ_EXCEPTION 0x8 /* raise as exception */
#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
/* Software defined banks */
#define MCE_EXTENDED_BANK 128
#define MCE_THERMAL_BANK (MCE_EXTENDED_BANK + 0)
#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
#define MCE_LOG_LEN 32
#define MCE_LOG_SIGNATURE "MACHINECHECK"
/*
* This structure contains all data related to the MCE log. Also
* carries a signature to make it easier to find from external
* debugging tools. Each entry is only valid when its finished flag
* is set.
*/
struct mce_log {
char signature[12]; /* "MACHINECHECK" */
unsigned len; /* = MCE_LOG_LEN */
unsigned next;
unsigned flags;
unsigned recordlen; /* length of struct mce */
struct mce entry[MCE_LOG_LEN];
};
struct mca_config {
bool dont_log_ce;
......
......@@ -142,6 +142,11 @@ static inline unsigned long pmd_pfn(pmd_t pmd)
return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
static inline unsigned long pud_pfn(pud_t pud)
{
return (pud_val(pud) & PTE_PFN_MASK) >> PAGE_SHIFT;
}
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
static inline int pmd_large(pmd_t pte)
......
......@@ -4,66 +4,6 @@
#include <linux/types.h>
#include <asm/ioctls.h>
/*
* Machine Check support for x86
*/
/* MCG_CAP register defines */
#define MCG_BANKCNT_MASK 0xff /* Number of Banks */
#define MCG_CTL_P (1ULL<<8) /* MCG_CTL register available */
#define MCG_EXT_P (1ULL<<9) /* Extended registers available */
#define MCG_CMCI_P (1ULL<<10) /* CMCI supported */
#define MCG_EXT_CNT_MASK 0xff0000 /* Number of Extended registers */
#define MCG_EXT_CNT_SHIFT 16
#define MCG_EXT_CNT(c) (((c) & MCG_EXT_CNT_MASK) >> MCG_EXT_CNT_SHIFT)
#define MCG_SER_P (1ULL<<24) /* MCA recovery/new status bits */
/* MCG_STATUS register defines */
#define MCG_STATUS_RIPV (1ULL<<0) /* restart ip valid */
#define MCG_STATUS_EIPV (1ULL<<1) /* ip points to correct instruction */
#define MCG_STATUS_MCIP (1ULL<<2) /* machine check in progress */
/* MCi_STATUS register defines */
#define MCI_STATUS_VAL (1ULL<<63) /* valid error */
#define MCI_STATUS_OVER (1ULL<<62) /* previous errors lost */
#define MCI_STATUS_UC (1ULL<<61) /* uncorrected error */
#define MCI_STATUS_EN (1ULL<<60) /* error enabled */
#define MCI_STATUS_MISCV (1ULL<<59) /* misc error reg. valid */
#define MCI_STATUS_ADDRV (1ULL<<58) /* addr reg. valid */
#define MCI_STATUS_PCC (1ULL<<57) /* processor context corrupt */
#define MCI_STATUS_S (1ULL<<56) /* Signaled machine check */
#define MCI_STATUS_AR (1ULL<<55) /* Action required */
#define MCACOD 0xffff /* MCA Error Code */
/* Architecturally defined codes from SDM Vol. 3B Chapter 15 */
#define MCACOD_SCRUB 0x00C0 /* 0xC0-0xCF Memory Scrubbing */
#define MCACOD_SCRUBMSK 0xfff0
#define MCACOD_L3WB 0x017A /* L3 Explicit Writeback */
#define MCACOD_DATA 0x0134 /* Data Load */
#define MCACOD_INSTR 0x0150 /* Instruction Fetch */
/* MCi_MISC register defines */
#define MCI_MISC_ADDR_LSB(m) ((m) & 0x3f)
#define MCI_MISC_ADDR_MODE(m) (((m) >> 6) & 7)
#define MCI_MISC_ADDR_SEGOFF 0 /* segment offset */
#define MCI_MISC_ADDR_LINEAR 1 /* linear address */
#define MCI_MISC_ADDR_PHYS 2 /* physical address */
#define MCI_MISC_ADDR_MEM 3 /* memory address */
#define MCI_MISC_ADDR_GENERIC 7 /* generic */
/* CTL2 register defines */
#define MCI_CTL2_CMCI_EN (1ULL << 30)
#define MCI_CTL2_CMCI_THRESHOLD_MASK 0x7fffULL
#define MCJ_CTX_MASK 3
#define MCJ_CTX(flags) ((flags) & MCJ_CTX_MASK)
#define MCJ_CTX_RANDOM 0 /* inject context: random */
#define MCJ_CTX_PROCESS 0x1 /* inject context: process */
#define MCJ_CTX_IRQ 0x2 /* inject context: IRQ */
#define MCJ_NMI_BROADCAST 0x4 /* do NMI broadcasting */
#define MCJ_EXCEPTION 0x8 /* raise as exception */
#define MCJ_IRQ_BRAODCAST 0x10 /* do IRQ broadcasting */
/* Fields are zero when not available */
struct mce {
__u64 status;
......@@ -87,35 +27,8 @@ struct mce {
__u64 mcgcap; /* MCGCAP MSR: machine check capabilities of CPU */
};
/*
* This structure contains all data related to the MCE log. Also
* carries a signature to make it easier to find from external
* debugging tools. Each entry is only valid when its finished flag
* is set.
*/
#define MCE_LOG_LEN 32
struct mce_log {
char signature[12]; /* "MACHINECHECK" */
unsigned len; /* = MCE_LOG_LEN */
unsigned next;
unsigned flags;
unsigned recordlen; /* length of struct mce */
struct mce entry[MCE_LOG_LEN];
};
#define MCE_OVERFLOW 0 /* bit 0 in flags means overflow */
#define MCE_LOG_SIGNATURE "MACHINECHECK"
#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
#define MCE_GET_LOG_LEN _IOR('M', 2, int)
#define MCE_GETCLEAR_FLAGS _IOR('M', 3, int)
/* Software defined banks */
#define MCE_EXTENDED_BANK 128
#define MCE_THERMAL_BANK MCE_EXTENDED_BANK + 0
#define K8_MCE_THRESHOLD_BASE (MCE_EXTENDED_BANK + 1)
#endif /* _UAPI_ASM_X86_MCE_H */
......@@ -20,18 +20,19 @@ static int set_x2apic_phys_mode(char *arg)
}
early_param("x2apic_phys", set_x2apic_phys_mode);
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
static bool x2apic_fadt_phys(void)
{
if (x2apic_phys)
return x2apic_enabled();
else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) &&
x2apic_enabled()) {
if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "System requires x2apic physical mode\n");
return 1;
return true;
}
else
return 0;
return false;
}
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
return x2apic_enabled() && (x2apic_phys || x2apic_fadt_phys());
}
static void
......@@ -82,7 +83,7 @@ static void init_x2apic_ldr(void)
static int x2apic_phys_probe(void)
{
if (x2apic_mode && x2apic_phys)
if (x2apic_mode && (x2apic_phys || x2apic_fadt_phys()))
return 1;
return apic == &apic_x2apic_phys;
......
......@@ -748,13 +748,15 @@ __bad_area_nosemaphore(struct pt_regs *regs, unsigned long error_code,
return;
}
#endif
/* Kernel addresses are always protection faults: */
if (address >= TASK_SIZE)
error_code |= PF_PROT;
if (unlikely(show_unhandled_signals))
if (likely(show_unhandled_signals))
show_signal_msg(regs, error_code, address, tsk);
/* Kernel addresses are always protection faults: */
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code | (address >= TASK_SIZE);
tsk->thread.error_code = error_code;
tsk->thread.trap_nr = X86_TRAP_PF;
force_sig_info_fault(SIGSEGV, si_code, address, tsk, 0);
......
......@@ -831,6 +831,9 @@ int kern_addr_valid(unsigned long addr)
if (pud_none(*pud))
return 0;
if (pud_large(*pud))
return pfn_valid(pud_pfn(*pud));
pmd = pmd_offset(pud, addr);
if (pmd_none(*pmd))
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment