Commit 42c9dee8 authored by Tomi Valkeinen's avatar Tomi Valkeinen

OMAP: DSS2: Remove FB_OMAP_BOOTLOADER_INIT support

FB_OMAP_BOOTLOADER_INIT does not work, and it was only partially
implemented for SDI.

This patch removes support for FB_OMAP_BOOTLOADER_INIT to clean up the
code and to remove any assumptions that FB_OMAP_BOOTLOADER_INIT would
work.

Proper implementation is much more complex, requiring early boot time
register and clock handling to keep the DSS running.
Signed-off-by: default avatarTomi Valkeinen <tomi.valkeinen@ti.com>
parent 1bb47835
......@@ -166,7 +166,6 @@ static inline void dss_uninitialize_debugfs(void)
static int omap_dss_probe(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
int skip_init = 0;
int r;
int i;
......@@ -210,13 +209,8 @@ static int omap_dss_probe(struct platform_device *pdev)
goto err_venc;
}
#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
/* DISPC_CONTROL */
if (omap_readl(0x48050440) & 1) /* LCD enabled? */
skip_init = 1;
#endif
if (cpu_is_omap34xx()) {
r = sdi_init(skip_init);
r = sdi_init();
if (r) {
DSSERR("Failed to initialize SDI\n");
goto err_sdi;
......
......@@ -559,7 +559,7 @@ void dss_set_dac_pwrdn_bgz(bool enable)
REG_FLD_MOD(DSS_CONTROL, enable, 5, 5); /* DAC Power-Down Control */
}
static int dss_init(bool skip_init)
static int dss_init(void)
{
int r;
u32 rev;
......@@ -578,22 +578,20 @@ static int dss_init(bool skip_init)
goto fail0;
}
if (!skip_init) {
/* disable LCD and DIGIT output. This seems to fix the synclost
* problem that we get, if the bootloader starts the DSS and
* the kernel resets it */
omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
/* We need to wait here a bit, otherwise we sometimes start to
* get synclost errors, and after that only power cycle will
* restore DSS functionality. I have no idea why this happens.
* And we have to wait _before_ resetting the DSS, but after
* enabling clocks.
*/
msleep(50);
_omap_dss_reset();
}
/* disable LCD and DIGIT output. This seems to fix the synclost
* problem that we get, if the bootloader starts the DSS and
* the kernel resets it */
omap_writel(omap_readl(0x48050440) & ~0x3, 0x48050440);
/* We need to wait here a bit, otherwise we sometimes start to
* get synclost errors, and after that only power cycle will
* restore DSS functionality. I have no idea why this happens.
* And we have to wait _before_ resetting the DSS, but after
* enabling clocks.
*/
msleep(50);
_omap_dss_reset();
/* autoidle */
REG_FLD_MOD(DSS_SYSCONFIG, 1, 0, 0);
......@@ -954,7 +952,6 @@ void dss_debug_dump_clocks(struct seq_file *s)
static int omap_dsshw_probe(struct platform_device *pdev)
{
int r;
int skip_init = 0;
dss.pdev = pdev;
......@@ -967,13 +964,7 @@ static int omap_dsshw_probe(struct platform_device *pdev)
dss.ctx_id = dss_get_ctx_id();
DSSDBG("initial ctx id %u\n", dss.ctx_id);
#ifdef CONFIG_FB_OMAP_BOOTLOADER_INIT
/* DISPC_CONTROL */
if (omap_readl(0x48050440) & 1) /* LCD enabled? */
skip_init = 1;
#endif
r = dss_init(skip_init);
r = dss_init();
if (r) {
DSSERR("Failed to initialize DSS\n");
goto err_dss;
......
......@@ -251,11 +251,11 @@ int dss_calc_clock_div(bool is_tft, unsigned long req_pck,
/* SDI */
#ifdef CONFIG_OMAP2_DSS_SDI
int sdi_init(bool skip_init);
int sdi_init(void);
void sdi_exit(void);
int sdi_init_display(struct omap_dss_device *display);
#else
static inline int sdi_init(bool skip_init)
static inline int sdi_init(void)
{
return 0;
}
......
......@@ -30,7 +30,6 @@
#include "dss.h"
static struct {
bool skip_init;
bool update_enabled;
struct regulator *vdds_sdi_reg;
} sdi;
......@@ -68,9 +67,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err1;
/* In case of skip_init sdi_init has already enabled the clocks */
if (!sdi.skip_init)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
sdi_basic_init(dssdev);
......@@ -80,14 +77,8 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acbi, dssdev->panel.acb);
if (!sdi.skip_init) {
r = dss_calc_clock_div(1, t->pixel_clock * 1000,
&dss_cinfo, &dispc_cinfo);
} else {
r = dss_get_clock_div(&dss_cinfo);
r = dispc_get_clock_div(dssdev->manager->id, &dispc_cinfo);
}
r = dss_calc_clock_div(1, t->pixel_clock * 1000,
&dss_cinfo, &dispc_cinfo);
if (r)
goto err2;
......@@ -116,18 +107,14 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (r)
goto err2;
if (!sdi.skip_init) {
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
if (r)
goto err1;
mdelay(2);
}
dss_sdi_init(dssdev->phy.sdi.datapairs);
r = dss_sdi_enable();
if (r)
goto err1;
mdelay(2);
dssdev->manager->enable(dssdev->manager);
sdi.skip_init = 0;
return 0;
err2:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK);
......@@ -173,17 +160,8 @@ int sdi_init_display(struct omap_dss_device *dssdev)
return 0;
}
int sdi_init(bool skip_init)
int sdi_init(void)
{
/* we store this for first display enable, then clear it */
sdi.skip_init = skip_init;
/*
* Enable clocks already here, otherwise there would be a toggle
* of them until sdi_display_enable is called.
*/
if (skip_init)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment