Merge remote-tracking branches 'spi/topic/blackfin', 'spi/topic/cadence',...

Merge remote-tracking branches 'spi/topic/blackfin', 'spi/topic/cadence', 'spi/topic/dw' and 'spi/topic/err' into spi-next

drivers/dma/Kconfig

@@ -51,19 +51,6 @@ config INTEL_MIC_X100_DMA
 	  OS and tools for MIC to use with this driver are available from
 	  <http://software.intel.com/en-us/mic-developer>.
 
-config INTEL_MID_DMAC
-	tristate "Intel MID DMA support for Peripheral DMA controllers"
-	depends on PCI && X86
-	select DMA_ENGINE
-	default n
-	help
-	  Enable support for the Intel(R) MID DMA engine present
-	  in Intel MID chipsets.
-
-	  Say Y here if you have such a chipset.
-
-	  If unsure, say N.
-
 config ASYNC_TX_ENABLE_CHANNEL_SWITCH
 	bool
 

drivers/dma/Makefile

@@ -6,7 +6,6 @@ obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
 obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
 obj-$(CONFIG_DMA_OF) += of-dma.o
 
-obj-$(CONFIG_INTEL_MID_DMAC) += intel_mid_dma.o
 obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o

drivers/dma/intel_mid_dma_regs.h

-/*
- *  intel_mid_dma_regs.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMAC_REGS_H__
-#define __INTEL_MID_DMAC_REGS_H__
-
-#include <linux/dmaengine.h>
-#include <linux/dmapool.h>
-#include <linux/pci_ids.h>
-
-#define INTEL_MID_DMA_DRIVER_VERSION "1.1.0"
-
-#define	REG_BIT0		0x00000001
-#define	REG_BIT8		0x00000100
-#define INT_MASK_WE		0x8
-#define CLEAR_DONE		0xFFFFEFFF
-#define UNMASK_INTR_REG(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-#define MASK_INTR_REG(chan_num) (REG_BIT8 << chan_num)
-
-#define ENABLE_CHANNEL(chan_num) \
-	((REG_BIT0 << chan_num) | (REG_BIT8 << chan_num))
-
-#define DISABLE_CHANNEL(chan_num) \
-	(REG_BIT8 << chan_num)
-
-#define DESCS_PER_CHANNEL	16
-/*DMA Registers*/
-/*registers associated with channel programming*/
-#define DMA_REG_SIZE		0x400
-#define DMA_CH_SIZE		0x58
-
-/*CH X REG = (DMA_CH_SIZE)*CH_NO + REG*/
-#define SAR			0x00 /* Source Address Register*/
-#define DAR			0x08 /* Destination Address Register*/
-#define LLP			0x10 /* Linked List Pointer Register*/
-#define CTL_LOW			0x18 /* Control Register*/
-#define CTL_HIGH		0x1C /* Control Register*/
-#define CFG_LOW			0x40 /* Configuration Register Low*/
-#define CFG_HIGH		0x44 /* Configuration Register high*/
-
-#define STATUS_TFR		0x2E8
-#define STATUS_BLOCK		0x2F0
-#define STATUS_ERR		0x308
-
-#define RAW_TFR			0x2C0
-#define RAW_BLOCK		0x2C8
-#define RAW_ERR			0x2E0
-
-#define MASK_TFR		0x310
-#define MASK_BLOCK		0x318
-#define MASK_SRC_TRAN		0x320
-#define MASK_DST_TRAN		0x328
-#define MASK_ERR		0x330
-
-#define CLEAR_TFR		0x338
-#define CLEAR_BLOCK		0x340
-#define CLEAR_SRC_TRAN		0x348
-#define CLEAR_DST_TRAN		0x350
-#define CLEAR_ERR		0x358
-
-#define INTR_STATUS		0x360
-#define DMA_CFG			0x398
-#define DMA_CHAN_EN		0x3A0
-
-/*DMA channel control registers*/
-union intel_mid_dma_ctl_lo {
-	struct {
-		u32	int_en:1;	/*enable or disable interrupts*/
-					/*should be 0*/
-		u32	dst_tr_width:3;	/*destination transfer width*/
-					/*usually 32 bits = 010*/
-		u32	src_tr_width:3; /*source transfer width*/
-					/*usually 32 bits = 010*/
-		u32	dinc:2;		/*destination address inc/dec*/
-					/*For mem:INC=00, Periphral NoINC=11*/
-		u32	sinc:2;		/*source address inc or dec, as above*/
-		u32	dst_msize:3;	/*destination burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	src_msize:3;	/*source burst transaction length*/
-					/*always = 16 ie 011*/
-		u32	reser1:3;
-		u32	tt_fc:3;	/*transfer type and flow controller*/
-					/*M-M = 000
-					  P-M = 010
-					  M-P = 001*/
-		u32	dms:2;		/*destination master select = 0*/
-		u32	sms:2;		/*source master select = 0*/
-		u32	llp_dst_en:1;	/*enable/disable destination LLP = 0*/
-		u32	llp_src_en:1;	/*enable/disable source LLP = 0*/
-		u32	reser2:3;
-	} ctlx;
-	u32	ctl_lo;
-};
-
-union intel_mid_dma_ctl_hi {
-	struct {
-		u32	block_ts:12;	/*block transfer size*/
-		u32	done:1;		/*Done - updated by DMAC*/
-		u32	reser:19;	/*configured by DMAC*/
-	} ctlx;
-	u32	ctl_hi;
-
-};
-
-/*DMA channel configuration registers*/
-union intel_mid_dma_cfg_lo {
-	struct {
-		u32	reser1:5;
-		u32	ch_prior:3;	/*channel priority = 0*/
-		u32	ch_susp:1;	/*channel suspend = 0*/
-		u32	fifo_empty:1;	/*FIFO empty or not R bit = 0*/
-		u32	hs_sel_dst:1;	/*select HW/SW destn handshaking*/
-					/*HW = 0, SW = 1*/
-		u32	hs_sel_src:1;	/*select HW/SW src handshaking*/
-		u32	reser2:6;
-		u32	dst_hs_pol:1;	/*dest HS interface polarity*/
-		u32	src_hs_pol:1;	/*src HS interface polarity*/
-		u32	max_abrst:10;	/*max AMBA burst len = 0 (no sw limit*/
-		u32	reload_src:1;	/*auto reload src addr =1 if src is P*/
-		u32	reload_dst:1;	/*AR destn addr =1 if dstn is P*/
-	} cfgx;
-	u32	cfg_lo;
-};
-
-union intel_mid_dma_cfg_hi {
-	struct {
-		u32	fcmode:1;	/*flow control mode = 1*/
-		u32	fifo_mode:1;	/*FIFO mode select = 1*/
-		u32	protctl:3;	/*protection control = 0*/
-		u32	rsvd:2;
-		u32	src_per:4;	/*src hw HS interface*/
-		u32	dst_per:4;	/*dstn hw HS interface*/
-		u32	reser2:17;
-	} cfgx;
-	u32	cfg_hi;
-};
-
-
-/**
- * struct intel_mid_dma_chan - internal mid representation of a DMA channel
- * @chan: dma_chan strcture represetation for mid chan
- * @ch_regs: MMIO register space pointer to channel register
- * @dma_base: MMIO register space DMA engine base pointer
- * @ch_id: DMA channel id
- * @lock: channel spinlock
- * @active_list: current active descriptors
- * @queue: current queued up descriptors
- * @free_list: current free descriptors
- * @slave: dma slave structure
- * @descs_allocated: total number of descriptors allocated
- * @dma: dma device structure pointer
- * @busy: bool representing if ch is busy (active txn) or not
- * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt received
- * @raw_block: raw block interrupt received
- */
-struct intel_mid_dma_chan {
-	struct dma_chan		chan;
-	void __iomem		*ch_regs;
-	void __iomem		*dma_base;
-	int			ch_id;
-	spinlock_t		lock;
-	struct list_head	active_list;
-	struct list_head	queue;
-	struct list_head	free_list;
-	unsigned int		descs_allocated;
-	struct middma_device	*dma;
-	bool			busy;
-	bool			in_use;
-	u32			raw_tfr;
-	u32			raw_block;
-	struct intel_mid_dma_slave *mid_slave;
-};
-
-static inline struct intel_mid_dma_chan *to_intel_mid_dma_chan(
-						struct dma_chan *chan)
-{
-	return container_of(chan, struct intel_mid_dma_chan, chan);
-}
-
-enum intel_mid_dma_state {
-	RUNNING = 0,
-	SUSPENDED,
-};
-/**
- * struct middma_device - internal representation of a DMA device
- * @pdev: PCI device
- * @dma_base: MMIO register space pointer of DMA
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @tasklet: dma tasklet for processing interrupts
- * @ch: per channel data
- * @pci_id: DMA device PCI ID
- * @intr_mask: Interrupt mask to be used
- * @mask_reg: MMIO register for periphral mask
- * @chan_base: Base ch index (read from driver data)
- * @max_chan: max number of chs supported (from drv_data)
- * @block_size: Block size of DMA transfer supported (from drv_data)
- * @pimr_mask: MMIO register addr for periphral interrupt (from drv_data)
- * @state: dma PM device state
- */
-struct middma_device {
-	struct pci_dev		*pdev;
-	void __iomem		*dma_base;
-	struct pci_pool		*dma_pool;
-	struct dma_device	common;
-	struct tasklet_struct   tasklet;
-	struct intel_mid_dma_chan ch[MAX_CHAN];
-	unsigned int		pci_id;
-	unsigned int		intr_mask;
-	void __iomem		*mask_reg;
-	int			chan_base;
-	int			max_chan;
-	int			block_size;
-	unsigned int		pimr_mask;
-	enum intel_mid_dma_state state;
-};
-
-static inline struct middma_device *to_middma_device(struct dma_device *common)
-{
-	return container_of(common, struct middma_device, common);
-}
-
-struct intel_mid_dma_desc {
-	void __iomem			*block; /*ch ptr*/
-	struct list_head		desc_node;
-	struct dma_async_tx_descriptor	txd;
-	size_t				len;
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	u32				cfg_hi;
-	u32				cfg_lo;
-	u32				ctl_lo;
-	u32				ctl_hi;
-	struct pci_pool			*lli_pool;
-	struct intel_mid_dma_lli	*lli;
-	dma_addr_t			lli_phys;
-	unsigned int			lli_length;
-	unsigned int			current_lli;
-	dma_addr_t			next;
-	enum dma_transfer_direction		dirn;
-	enum dma_status			status;
-	enum dma_slave_buswidth		width; /*width of DMA txn*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-
-};
-
-struct intel_mid_dma_lli {
-	dma_addr_t			sar;
-	dma_addr_t			dar;
-	dma_addr_t			llp;
-	u32				ctl_lo;
-	u32				ctl_hi;
-} __attribute__ ((packed));
-
-static inline int test_ch_en(void __iomem *dma, u32 ch_no)
-{
-	u32 en_reg = ioread32(dma + DMA_CHAN_EN);
-	return (en_reg >> ch_no) & 0x1;
-}
-
-static inline struct intel_mid_dma_desc *to_intel_mid_dma_desc
-		(struct dma_async_tx_descriptor *txd)
-{
-	return container_of(txd, struct intel_mid_dma_desc, txd);
-}
-
-static inline struct intel_mid_dma_slave *to_intel_mid_dma_slave
-		(struct dma_slave_config *slave)
-{
-	return container_of(slave, struct intel_mid_dma_slave, dma_slave);
-}
-
-
-int dma_resume(struct device *dev);
-
-#endif /*__INTEL_MID_DMAC_REGS_H__*/

drivers/spi/Kconfig

@@ -159,10 +159,9 @@ config SPI_BUTTERFLY
 
 config SPI_CADENCE
 	tristate "Cadence SPI controller"
-	depends on ARM
 	help
 	  This selects the Cadence SPI controller master driver
-	  used by Xilinx Zynq.
+	  used by Xilinx Zynq and ZynqMP.
 
 config SPI_CLPS711X
 	tristate "CLPS711X host SPI controller"
@@ -632,7 +631,7 @@ config SPI_DW_PCI
 
 config SPI_DW_MID_DMA
 	bool "DMA support for DW SPI controller on Intel MID platform"
-	depends on SPI_DW_PCI && INTEL_MID_DMAC
+	depends on SPI_DW_PCI && DW_DMAC_PCI
 
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"

drivers/spi/spi-bfin5xx.c

@@ -559,7 +559,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	struct spi_transfer *previous = NULL;
 	struct bfin_spi_slave_data *chip = NULL;
 	unsigned int bits_per_word;
-	u16 cr, cr_width, dma_width, dma_config;
+	u16 cr, cr_width = 0, dma_width, dma_config;
 	u32 tranf_success = 1;
 	u8 full_duplex = 0;
 
@@ -648,7 +648,6 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	} else if (bits_per_word == 8) {
 		drv_data->n_bytes = bits_per_word/8;
 		drv_data->len = transfer->len;
-		cr_width = 0;
 		drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
 	}
 	cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);

drivers/spi/spi-dw-mid.c

@@ -23,29 +23,31 @@
 #include "spi-dw.h"
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-#include <linux/intel_mid_dma.h>
 #include <linux/pci.h>
+#include <linux/platform_data/dma-dw.h>
 
 #define RX_BUSY		0
 #define TX_BUSY		1
 
-struct mid_dma {
-	struct intel_mid_dma_slave	dmas_tx;
-	struct intel_mid_dma_slave	dmas_rx;
-};
+static struct dw_dma_slave mid_dma_tx = { .dst_id = 1 };
+static struct dw_dma_slave mid_dma_rx = { .src_id = 0 };
 
 static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
 {
-	struct dw_spi *dws = param;
+	struct dw_dma_slave *s = param;
+
+	if (s->dma_dev != chan->device->dev)
+		return false;
 
-	return dws->dma_dev == chan->device->dev;
+	chan->private = s;
+	return true;
 }
 
 static int mid_spi_dma_init(struct dw_spi *dws)
 {
-	struct mid_dma *dw_dma = dws->dma_priv;
 	struct pci_dev *dma_dev;
-	struct intel_mid_dma_slave *rxs, *txs;
+	struct dw_dma_slave *tx = dws->dma_tx;
+	struct dw_dma_slave *rx = dws->dma_rx;
 	dma_cap_mask_t mask;
 
 	/*
@@ -56,28 +58,22 @@ static int mid_spi_dma_init(struct dw_spi *dws)
 	if (!dma_dev)
 		return -ENODEV;
 
-	dws->dma_dev = &dma_dev->dev;
-
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
 	/* 1. Init rx channel */
-	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	rx->dma_dev = &dma_dev->dev;
+	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, rx);
 	if (!dws->rxchan)
 		goto err_exit;
-	rxs = &dw_dma->dmas_rx;
-	rxs->hs_mode = LNW_DMA_HW_HS;
-	rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
-	dws->rxchan->private = rxs;
+	dws->master->dma_rx = dws->rxchan;
 
 	/* 2. Init tx channel */
-	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	tx->dma_dev = &dma_dev->dev;
+	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, tx);
 	if (!dws->txchan)
 		goto free_rxchan;
-	txs = &dw_dma->dmas_tx;
-	txs->hs_mode = LNW_DMA_HW_HS;
-	txs->cfg_mode = LNW_DMA_MEM_TO_PER;
-	dws->txchan->private = txs;
+	dws->master->dma_tx = dws->txchan;
 
 	dws->dma_inited = 1;
 	return 0;
@@ -100,6 +96,42 @@ static void mid_spi_dma_exit(struct dw_spi *dws)
 	dma_release_channel(dws->rxchan);
 }
 
+static irqreturn_t dma_transfer(struct dw_spi *dws)
+{
+	u16 irq_status = dw_readl(dws, DW_SPI_ISR);
+
+	if (!irq_status)
+		return IRQ_NONE;
+
+	dw_readl(dws, DW_SPI_ICR);
+	spi_reset_chip(dws);
+
+	dev_err(&dws->master->dev, "%s: FIFO overrun/underrun\n", __func__);
+	dws->master->cur_msg->status = -EIO;
+	spi_finalize_current_transfer(dws->master);
+	return IRQ_HANDLED;
+}
+
+static bool mid_spi_can_dma(struct spi_master *master, struct spi_device *spi,
+		struct spi_transfer *xfer)
+{
+	struct dw_spi *dws = spi_master_get_devdata(master);
+
+	if (!dws->dma_inited)
+		return false;
+
+	return xfer->len > dws->fifo_len;
+}
+
+static enum dma_slave_buswidth convert_dma_width(u32 dma_width) {
+	if (dma_width == 1)
+		return DMA_SLAVE_BUSWIDTH_1_BYTE;
+	else if (dma_width == 2)
+		return DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	return DMA_SLAVE_BUSWIDTH_UNDEFINED;
+}
+
 /*
  * dws->dma_chan_busy is set before the dma transfer starts, callback for tx
  * channel will clear a corresponding bit.
@@ -111,33 +143,30 @@ static void dw_spi_dma_tx_done(void *arg)
 	clear_bit(TX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(RX_BUSY, &dws->dma_chan_busy))
 		return;
-	dw_spi_xfer_done(dws);
+	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_tx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config txconf;
 	struct dma_async_tx_descriptor *txdesc;
 
-	if (!dws->tx_dma)
+	if (!xfer->tx_buf)
 		return NULL;
 
 	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
-	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+	txconf.dst_maxburst = 16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	txconf.dst_addr_width = dws->dma_width;
+	txconf.dst_addr_width = convert_dma_width(dws->dma_width);
 	txconf.device_fc = false;
 
 	dmaengine_slave_config(dws->txchan, &txconf);
 
-	memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
-	dws->tx_sgl.dma_address = dws->tx_dma;
-	dws->tx_sgl.length = dws->len;
-
 	txdesc = dmaengine_prep_slave_sg(dws->txchan,
-				&dws->tx_sgl,
-				1,
+				xfer->tx_sg.sgl,
+				xfer->tx_sg.nents,
 				DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
@@ -160,33 +189,30 @@ static void dw_spi_dma_rx_done(void *arg)
 	clear_bit(RX_BUSY, &dws->dma_chan_busy);
 	if (test_bit(TX_BUSY, &dws->dma_chan_busy))
 		return;
-	dw_spi_xfer_done(dws);
+	spi_finalize_current_transfer(dws->master);
 }
 
-static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
+static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws,
+		struct spi_transfer *xfer)
 {
 	struct dma_slave_config rxconf;
 	struct dma_async_tx_descriptor *rxdesc;
 
-	if (!dws->rx_dma)
+	if (!xfer->rx_buf)
 		return NULL;
 
 	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
-	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+	rxconf.src_maxburst = 16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
-	rxconf.src_addr_width = dws->dma_width;
+	rxconf.src_addr_width = convert_dma_width(dws->dma_width);
 	rxconf.device_fc = false;
 
 	dmaengine_slave_config(dws->rxchan, &rxconf);
 
-	memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
-	dws->rx_sgl.dma_address = dws->rx_dma;
-	dws->rx_sgl.length = dws->len;
-
 	rxdesc = dmaengine_prep_slave_sg(dws->rxchan,
-				&dws->rx_sgl,
-				1,
+				xfer->rx_sg.sgl,
+				xfer->rx_sg.nents,
 				DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
@@ -198,37 +224,36 @@ static struct dma_async_tx_descriptor *dw_spi_dma_prepare_rx(struct dw_spi *dws)
 	return rxdesc;
 }
 
-static void dw_spi_dma_setup(struct dw_spi *dws)
+static int mid_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	u16 dma_ctrl = 0;
 
-	spi_enable_chip(dws, 0);
-
-	dw_writew(dws, DW_SPI_DMARDLR, 0xf);
-	dw_writew(dws, DW_SPI_DMATDLR, 0x10);
+	dw_writel(dws, DW_SPI_DMARDLR, 0xf);
+	dw_writel(dws, DW_SPI_DMATDLR, 0x10);
 
-	if (dws->tx_dma)
+	if (xfer->tx_buf)
 		dma_ctrl |= SPI_DMA_TDMAE;
-	if (dws->rx_dma)
+	if (xfer->rx_buf)
 		dma_ctrl |= SPI_DMA_RDMAE;
-	dw_writew(dws, DW_SPI_DMACR, dma_ctrl);
+	dw_writel(dws, DW_SPI_DMACR, dma_ctrl);
+
+	/* Set the interrupt mask */
+	spi_umask_intr(dws, SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI);
+
+	dws->transfer_handler = dma_transfer;
 
-	spi_enable_chip(dws, 1);
+	return 0;
 }
 
-static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+static int mid_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer)
 {
 	struct dma_async_tx_descriptor *txdesc, *rxdesc;
 
-	/* 1. setup DMA related registers */
-	if (cs_change)
-		dw_spi_dma_setup(dws);
-
-	/* 2. Prepare the TX dma transfer */
-	txdesc = dw_spi_dma_prepare_tx(dws);
+	/* Prepare the TX dma transfer */
+	txdesc = dw_spi_dma_prepare_tx(dws, xfer);
 
-	/* 3. Prepare the RX dma transfer */
-	rxdesc = dw_spi_dma_prepare_rx(dws);
+	/* Prepare the RX dma transfer */
+	rxdesc = dw_spi_dma_prepare_rx(dws, xfer);
 
 	/* rx must be started before tx due to spi instinct */
 	if (rxdesc) {
@@ -246,10 +271,25 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	return 0;
 }
 
+static void mid_spi_dma_stop(struct dw_spi *dws)
+{
+	if (test_bit(TX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->txchan);
+		clear_bit(TX_BUSY, &dws->dma_chan_busy);
+	}
+	if (test_bit(RX_BUSY, &dws->dma_chan_busy)) {
+		dmaengine_terminate_all(dws->rxchan);
+		clear_bit(RX_BUSY, &dws->dma_chan_busy);
+	}
+}
+
 static struct dw_spi_dma_ops mid_dma_ops = {
 	.dma_init	= mid_spi_dma_init,
 	.dma_exit	= mid_spi_dma_exit,
+	.dma_setup	= mid_spi_dma_setup,
+	.can_dma	= mid_spi_can_dma,
 	.dma_transfer	= mid_spi_dma_transfer,
+	.dma_stop	= mid_spi_dma_stop,
 };
 #endif
 
@@ -282,9 +322,8 @@ int dw_spi_mid_init(struct dw_spi *dws)
 	iounmap(clk_reg);
 
 #ifdef CONFIG_SPI_DW_MID_DMA
-	dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
-	if (!dws->dma_priv)
-		return -ENOMEM;
+	dws->dma_tx = &mid_dma_tx;
+	dws->dma_rx = &mid_dma_rx;
 	dws->dma_ops = &mid_dma_ops;
 #endif
 	return 0;

drivers/spi/spi-dw.h

@@ -91,12 +91,15 @@ struct dw_spi;
 struct dw_spi_dma_ops {
 	int (*dma_init)(struct dw_spi *dws);
 	void (*dma_exit)(struct dw_spi *dws);
-	int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+	int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
+	bool (*can_dma)(struct spi_master *master, struct spi_device *spi,
+			struct spi_transfer *xfer);
+	int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer);
+	void (*dma_stop)(struct dw_spi *dws);
 };
 
 struct dw_spi {
 	struct spi_master	*master;
-	struct spi_device	*cur_dev;
 	enum dw_ssi_type	type;
 	char			name[16];
 
@@ -109,41 +112,26 @@ struct dw_spi {
 	u16			bus_num;
 	u16			num_cs;		/* supported slave numbers */
 
-	/* Message Transfer pump */
-	struct tasklet_struct	pump_transfers;
-
 	/* Current message transfer state info */
-	struct spi_message	*cur_msg;
-	struct spi_transfer	*cur_transfer;
-	struct chip_data	*cur_chip;
-	struct chip_data	*prev_chip;
 	size_t			len;
 	void			*tx;
 	void			*tx_end;
 	void			*rx;
 	void			*rx_end;
 	int			dma_mapped;
-	dma_addr_t		rx_dma;
-	dma_addr_t		tx_dma;
-	size_t			rx_map_len;
-	size_t			tx_map_len;
 	u8			n_bytes;	/* current is a 1/2 bytes op */
-	u8			max_bits_per_word;	/* maxim is 16b */
 	u32			dma_width;
 	irqreturn_t		(*transfer_handler)(struct dw_spi *dws);
-	void			(*cs_control)(u32 command);
 
-	/* Dma info */
+	/* DMA info */
 	int			dma_inited;
 	struct dma_chan		*txchan;
-	struct scatterlist	tx_sgl;
 	struct dma_chan		*rxchan;
-	struct scatterlist	rx_sgl;
 	unsigned long		dma_chan_busy;
-	struct device		*dma_dev;
 	dma_addr_t		dma_addr; /* phy address of the Data register */
 	struct dw_spi_dma_ops	*dma_ops;
-	void			*dma_priv; /* platform relate info */
+	void			*dma_tx;
+	void			*dma_rx;
 
 	/* Bus interface info */
 	void			*priv;
@@ -162,16 +150,6 @@ static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
 	__raw_writel(val, dws->regs + offset);
 }
 
-static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
-{
-	return __raw_readw(dws->regs + offset);
-}
-
-static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
-{
-	__raw_writew(val, dws->regs + offset);
-}
-
 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
 {
 	dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
@@ -182,22 +160,6 @@ static inline void spi_set_clk(struct dw_spi *dws, u16 div)
 	dw_writel(dws, DW_SPI_BAUDR, div);
 }
 
-static inline void spi_chip_sel(struct dw_spi *dws, struct spi_device *spi,
-		int active)
-{
-	u16 cs = spi->chip_select;
-	int gpio_val = active ? (spi->mode & SPI_CS_HIGH) :
-		!(spi->mode & SPI_CS_HIGH);
-
-	if (dws->cs_control)
-		dws->cs_control(active);
-	if (gpio_is_valid(spi->cs_gpio))
-		gpio_set_value(spi->cs_gpio, gpio_val);
-
-	if (active)
-		dw_writel(dws, DW_SPI_SER, 1 << cs);
-}
-
 /* Disable IRQ bits */
 static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
 {
@@ -216,16 +178,27 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
 	dw_writel(dws, DW_SPI_IMR, new_mask);
 }
 
+/*
+ * This does disable the SPI controller, interrupts, and re-enable the
+ * controller back. Transmit and receive FIFO buffers are cleared when the
+ * device is disabled.
+ */
+static inline void spi_reset_chip(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_mask_intr(dws, 0xff);
+	spi_enable_chip(dws, 1);
+}
+
 /*
  * Each SPI slave device to work with dw_api controller should
- * has such a structure claiming its working mode (PIO/DMA etc),
+ * has such a structure claiming its working mode (poll or PIO/DMA),
  * which can be save in the "controller_data" member of the
  * struct spi_device.
  */
 struct dw_spi_chip {
 	u8 poll_mode;	/* 1 for controller polling mode */
 	u8 type;	/* SPI/SSP/MicroWire */
-	u8 enable_dma;
 	void (*cs_control)(u32 command);
 };
 
@@ -233,7 +206,6 @@ extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
 extern int dw_spi_resume_host(struct dw_spi *dws);
-extern void dw_spi_xfer_done(struct dw_spi *dws);
 
 /* platform related setup */
 extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */

drivers/spi/spi.c

@@ -850,7 +850,7 @@ static int spi_transfer_one_message(struct spi_master *master,
 	if (msg->status == -EINPROGRESS)
 		msg->status = ret;
 
-	if (msg->status)
+	if (msg->status && master->handle_err)
 		master->handle_err(master, msg);
 
 	spi_finalize_current_message(master);

include/linux/intel_mid_dma.h

-/*
- *  intel_mid_dma.h - Intel MID DMA Drivers
- *
- *  Copyright (C) 2008-10 Intel Corp
- *  Author: Vinod Koul <vinod.koul@intel.com>
- *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful, but
- *  WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- *  General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- *
- */
-#ifndef __INTEL_MID_DMA_H__
-#define __INTEL_MID_DMA_H__
-
-#include <linux/dmaengine.h>
-
-#define DMA_PREP_CIRCULAR_LIST		(1 << 10)
-
-/*DMA mode configurations*/
-enum intel_mid_dma_mode {
-	LNW_DMA_PER_TO_MEM = 0, /*periphral to memory configuration*/
-	LNW_DMA_MEM_TO_PER,	/*memory to periphral configuration*/
-	LNW_DMA_MEM_TO_MEM,	/*mem to mem confg (testing only)*/
-};
-
-/*DMA handshaking*/
-enum intel_mid_dma_hs_mode {
-	LNW_DMA_HW_HS = 0,	/*HW Handshaking only*/
-	LNW_DMA_SW_HS = 1,	/*SW Handshaking not recommended*/
-};
-
-/*Burst size configuration*/
-enum intel_mid_dma_msize {
-	LNW_DMA_MSIZE_1 = 0x0,
-	LNW_DMA_MSIZE_4 = 0x1,
-	LNW_DMA_MSIZE_8 = 0x2,
-	LNW_DMA_MSIZE_16 = 0x3,
-	LNW_DMA_MSIZE_32 = 0x4,
-	LNW_DMA_MSIZE_64 = 0x5,
-};
-
-/**
- * struct intel_mid_dma_slave - DMA slave structure
- *
- * @dirn: DMA trf direction
- * @src_width: tx register width
- * @dst_width: rx register width
- * @hs_mode: HW/SW handshaking mode
- * @cfg_mode: DMA data transfer mode (per-per/mem-per/mem-mem)
- * @src_msize: Source DMA burst size
- * @dst_msize: Dst DMA burst size
- * @per_addr: Periphral address
- * @device_instance: DMA peripheral device instance, we can have multiple
- *		peripheral device connected to single DMAC
- */
-struct intel_mid_dma_slave {
-	enum intel_mid_dma_hs_mode	hs_mode;  /*handshaking*/
-	enum intel_mid_dma_mode		cfg_mode; /*mode configuration*/
-	unsigned int		device_instance; /*0, 1 for periphral instance*/
-	struct dma_slave_config		dma_slave;
-};
-
-#endif /*__INTEL_MID_DMA_H__*/

include/linux/spi/spi.h

@@ -294,7 +294,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                    transfer_one_message are mutually exclusive; when both
  *                    are set, the generic subsystem does not call your
  *                    transfer_one callback.
- * @handle_err: the subsystem calls the driver to handle and error that occurs
+ * @handle_err: the subsystem calls the driver to handle an error that occurs
  *		in the generic implementation of transfer_one_message().
  * @unprepare_message: undo any work done by prepare_message().
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS