Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm2385',...

Merge remote-tracking branches 'spi/topic/atmel', 'spi/topic/bcm2385', 'spi/topic/bcm2835', 'spi/topic/bcm53xx' and 'spi/topic/bitbang' into spi-next

drivers/spi/spi-atmel.c

@@ -180,11 +180,17 @@
 	  | SPI_BF(name, value))
 
 /* Register access macros */
+#ifdef CONFIG_AVR32
 #define spi_readl(port, reg) \
 	__raw_readl((port)->regs + SPI_##reg)
 #define spi_writel(port, reg, value) \
 	__raw_writel((value), (port)->regs + SPI_##reg)
-
+#else
+#define spi_readl(port, reg) \
+	readl_relaxed((port)->regs + SPI_##reg)
+#define spi_writel(port, reg, value) \
+	writel_relaxed((value), (port)->regs + SPI_##reg)
+#endif
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
  * cache operations; better heuristics consider wordsize and bitrate.
  */

drivers/spi/spi-bcm53xx.c

@@ -44,7 +44,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
 	u32 tmp;
 
 	/* SPE bit has to be 0 before we read MSPI STATUS */
-	deadline = jiffies + BCM53XXSPI_SPE_TIMEOUT_MS * HZ / 1000;
+	deadline = jiffies + msecs_to_jiffies(BCM53XXSPI_SPE_TIMEOUT_MS);
 	do {
 		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_SPCR2);
 		if (!(tmp & B53SPI_MSPI_SPCR2_SPE))
@@ -56,7 +56,7 @@ static int bcm53xxspi_wait(struct bcm53xxspi *b53spi, unsigned int timeout_ms)
 		goto spi_timeout;
 
 	/* Check status */
-	deadline = jiffies + timeout_ms * HZ / 1000;
+	deadline = jiffies + msecs_to_jiffies(timeout_ms);
 	do {
 		tmp = bcm53xxspi_read(b53spi, B53SPI_MSPI_MSPI_STATUS);
 		if (tmp & B53SPI_MSPI_MSPI_STATUS_SPIF) {

drivers/spi/spi-bitbang-txrx.h

@@ -49,12 +49,17 @@ bitbang_txrx_be_cpha0(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
 
+	bool oldbit = !(word & 1);
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
 		/* setup MSB (to slave) on trailing edge */
-		if ((flags & SPI_MASTER_NO_TX) == 0)
-			setmosi(spi, word & (1 << 31));
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & (1 << 31)) != oldbit) {
+				setmosi(spi, word & (1 << 31));
+				oldbit = word & (1 << 31);
+			}
+		}
 		spidelay(nsecs);	/* T(setup) */
 
 		setsck(spi, !cpol);
@@ -76,13 +81,18 @@ bitbang_txrx_be_cpha1(struct spi_device *spi,
 {
 	/* if (cpol == 0) this is SPI_MODE_1; else this is SPI_MODE_3 */
 
+	bool oldbit = !(word & (1 << 31));
 	/* clock starts at inactive polarity */
 	for (word <<= (32 - bits); likely(bits); bits--) {
 
 		/* setup MSB (to slave) on leading edge */
 		setsck(spi, !cpol);
-		if ((flags & SPI_MASTER_NO_TX) == 0)
-			setmosi(spi, word & (1 << 31));
+		if ((flags & SPI_MASTER_NO_TX) == 0) {
+			if ((word & (1 << 31)) != oldbit) {
+				setmosi(spi, word & (1 << 31));
+				oldbit = word & (1 << 31);
+			}
+		}
 		spidelay(nsecs); /* T(setup) */
 
 		setsck(spi, cpol);

drivers/spi/spi.c

@@ -850,6 +850,9 @@ static int spi_transfer_one_message(struct spi_master *master,
 	if (msg->status == -EINPROGRESS)
 		msg->status = ret;
 
+	if (msg->status)
+		master->handle_err(master, msg);
+
 	spi_finalize_current_message(master);
 
 	return ret;

include/linux/spi/spi.h

@@ -294,6 +294,8 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                    transfer_one_message are mutually exclusive; when both
  *                    are set, the generic subsystem does not call your
  *                    transfer_one callback.
+ * @handle_err: the subsystem calls the driver to handle and error that occurs
+ *		in the generic implementation of transfer_one_message().
  * @unprepare_message: undo any work done by prepare_message().
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that
@@ -448,6 +450,8 @@ struct spi_master {
 	void (*set_cs)(struct spi_device *spi, bool enable);
 	int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
 			    struct spi_transfer *transfer);
+	void (*handle_err)(struct spi_master *master,
+			   struct spi_message *message);
 
 	/* gpio chip select */
 	int			*cs_gpios;