clk: qcom: apss-ipq6018: fix apcs_alias0_clk_src

While working on IPQ8074 APSS driver it was discovered that IPQ6018 and
IPQ8074 use almost the same PLL and APSS clocks, however APSS driver is
currently broken.

More precisely apcs_alias0_clk_src is broken, it was added as regmap_mux
clock.
However after debugging why it was always stuck at 800Mhz, it was figured
out that its not regmap_mux compatible at all.
It is a simple mux but it uses RCG2 register layout and control bits, so
utilize the new clk_rcg2_mux_closest_ops to correctly drive it while not
having to provide a dummy frequency table.

While we are here, use ARRAY_SIZE for number of parents.

Tested on IPQ6018-CP01-C1 reference board and multiple IPQ8074 boards.

Fixes: 5e77b4ef ("clk: qcom: Add ipq6018 apss clock controller")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220818220628.339366-2-robimarko@gmail.com

drivers/clk/qcom/apss-ipq6018.c

@@ -16,7 +16,7 @@
 #include "clk-regmap.h"
 #include "clk-branch.h"
 #include "clk-alpha-pll.h"
-#include "clk-regmap-mux.h"
+#include "clk-rcg.h"
 
 enum {
 	P_XO,
@@ -33,16 +33,15 @@ static const struct parent_map parents_apcs_alias0_clk_src_map[] = {
 	{ P_APSS_PLL_EARLY, 5 },
 };
 
-static struct clk_regmap_mux apcs_alias0_clk_src = {
-	.reg = 0x0050,
-	.width = 3,
-	.shift = 7,
+static struct clk_rcg2 apcs_alias0_clk_src = {
+	.cmd_rcgr = 0x0050,
+	.hid_width = 5,
 	.parent_map = parents_apcs_alias0_clk_src_map,
 	.clkr.hw.init = &(struct clk_init_data){
 		.name = "apcs_alias0_clk_src",
 		.parent_data = parents_apcs_alias0_clk_src,
-		.num_parents = 2,
-		.ops = &clk_regmap_mux_closest_ops,
+		.num_parents = ARRAY_SIZE(parents_apcs_alias0_clk_src),
+		.ops = &clk_rcg2_mux_closest_ops,
 		.flags = CLK_SET_RATE_PARENT,
 	},
 };