Commit 43d28b65 authored by Daniel Turull's avatar Daniel Turull Committed by David S. Miller

pktgen: increasing transmission granularity

This patch increases the granularity of the rate generated by pktgen.
The previous version of pktgen uses micro seconds (udelay) resolution when it
was delayed causing gaps in the rates. It is changed to nanosecond (ndelay).
Now any rate is possible.

Also it allows to set, the desired rate in Mb/s or packets per second.

The documentation has been updated.
Signed-off-by: default avatarDaniel Turull <daniel.turull@gmail.com>
Signed-off-by: default avatarRobert Olsson <robert.olsson@its.uu.se>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 0c78a92f
......@@ -151,6 +151,8 @@ Examples:
pgset stop aborts injection. Also, ^C aborts generator.
pgset "rate 300M" set rate to 300 Mb/s
pgset "ratep 1000000" set rate to 1Mpps
Example scripts
===============
......@@ -241,6 +243,9 @@ src6
flows
flowlen
rate
ratep
References:
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/
......
......@@ -169,7 +169,7 @@
#include <asm/dma.h>
#include <asm/div64.h> /* do_div */
#define VERSION "2.73"
#define VERSION "2.74"
#define IP_NAME_SZ 32
#define MAX_MPLS_LABELS 16 /* This is the max label stack depth */
#define MPLS_STACK_BOTTOM htonl(0x00000100)
......@@ -980,6 +980,40 @@ static ssize_t pktgen_if_write(struct file *file,
(unsigned long long) pkt_dev->delay);
return count;
}
if (!strcmp(name, "rate")) {
len = num_arg(&user_buffer[i], 10, &value);
if (len < 0)
return len;
i += len;
if (!value)
return len;
pkt_dev->delay = pkt_dev->min_pkt_size*8*NSEC_PER_USEC/value;
if (debug)
printk(KERN_INFO
"pktgen: Delay set at: %llu ns\n",
pkt_dev->delay);
sprintf(pg_result, "OK: rate=%lu", value);
return count;
}
if (!strcmp(name, "ratep")) {
len = num_arg(&user_buffer[i], 10, &value);
if (len < 0)
return len;
i += len;
if (!value)
return len;
pkt_dev->delay = NSEC_PER_SEC/value;
if (debug)
printk(KERN_INFO
"pktgen: Delay set at: %llu ns\n",
pkt_dev->delay);
sprintf(pg_result, "OK: rate=%lu", value);
return count;
}
if (!strcmp(name, "udp_src_min")) {
len = num_arg(&user_buffer[i], 10, &value);
if (len < 0)
......@@ -2142,15 +2176,15 @@ static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until)
hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
hrtimer_set_expires(&t.timer, spin_until);
remaining = ktime_to_us(hrtimer_expires_remaining(&t.timer));
remaining = ktime_to_ns(hrtimer_expires_remaining(&t.timer));
if (remaining <= 0) {
pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
return;
}
start_time = ktime_now();
if (remaining < 100)
udelay(remaining); /* really small just spin */
if (remaining < 100000)
ndelay(remaining); /* really small just spin */
else {
/* see do_nanosleep */
hrtimer_init_sleeper(&t, current);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment