USB: EHCI: resolve some unlikely races

This patch (as1589) resolves some unlikely races involving system
shutdown or controller death in ehci-hcd:

	Shutdown races with both root-hub resume and controller
	resume.

	Controller death races with root-hub suspend.

A new bitflag is added to indicate that the controller has been shut
down (whether for system shutdown or because it died).  Tests are
added in the suspend and resume pathways to avoid reactivating the
controller after any sort of shutdown.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/ehci-hcd.c

@@ -343,6 +343,7 @@ static void ehci_shutdown(struct usb_hcd *hcd)
 	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
 
 	spin_lock_irq(&ehci->lock);
+	ehci->shutdown = true;
 	ehci->rh_state = EHCI_RH_STOPPING;
 	ehci->enabled_hrtimer_events = 0;
 	spin_unlock_irq(&ehci->lock);
@@ -823,6 +824,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 		usb_hc_died(hcd);
 
 		/* Don't let the controller do anything more */
+		ehci->shutdown = true;
 		ehci->rh_state = EHCI_RH_STOPPING;
 		ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
 		ehci_writel(ehci, ehci->command, &ehci->regs->command);
@@ -1129,6 +1131,9 @@ static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
 	/* Mark hardware accessible again as we are back to full power by now */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
+	if (ehci->shutdown)
+		return 0;		/* Controller is dead */
+
 	/*
 	 * If CF is still set and we aren't resuming from hibernation
 	 * then we maintained suspend power.
@@ -1139,10 +1144,17 @@ static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
 		int	mask = INTR_MASK;
 
 		ehci_prepare_ports_for_controller_resume(ehci);
+
+		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto skip;
+
 		if (!hcd->self.root_hub->do_remote_wakeup)
 			mask &= ~STS_PCD;
 		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
 		ehci_readl(ehci, &ehci->regs->intr_enable);
+ skip:
+		spin_unlock_irq(&ehci->lock);
 		return 0;
 	}
 
@@ -1154,14 +1166,20 @@ static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
 	(void) ehci_halt(ehci);
 	(void) ehci_reset(ehci);
 
+	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto skip;
+
 	ehci_writel(ehci, ehci->command, &ehci->regs->command);
 	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+	spin_unlock_irq(&ehci->lock);
+
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	ehci->rh_state = EHCI_RH_SUSPENDED;
 	return 1;
 }
 

drivers/usb/host/ehci-hub.c

@@ -221,6 +221,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci_quiesce(ehci);
 
 	spin_lock_irq (&ehci->lock);
+	if (ehci->rh_state < EHCI_RH_RUNNING)
+		goto done;
 
 	/* Once the controller is stopped, port resumes that are already
 	 * in progress won't complete.  Hence if remote wakeup is enabled
@@ -306,6 +308,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci_halt (ehci);
 
 	spin_lock_irq(&ehci->lock);
+	if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
+		ehci_handle_controller_death(ehci);
+	if (ehci->rh_state != EHCI_RH_RUNNING)
+		goto done;
 	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	end_unlink_async(ehci);
@@ -320,6 +326,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci_writel(ehci, mask, &ehci->regs->intr_enable);
 	ehci_readl(ehci, &ehci->regs->intr_enable);
 
+ done:
 	ehci->next_statechange = jiffies + msecs_to_jiffies(10);
 	ehci->enabled_hrtimer_events = 0;
 	ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
@@ -342,10 +349,8 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	if (time_before (jiffies, ehci->next_statechange))
 		msleep(5);
 	spin_lock_irq (&ehci->lock);
-	if (!HCD_HW_ACCESSIBLE(hcd)) {
-		spin_unlock_irq(&ehci->lock);
-		return -ESHUTDOWN;
-	}
+	if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
+		goto shutdown;
 
 	if (unlikely(ehci->debug)) {
 		if (!dbgp_reset_prep())
@@ -384,6 +389,8 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	spin_unlock_irq(&ehci->lock);
 	msleep(8);
 	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto shutdown;
 
 	/* clear phy low-power mode before resume */
 	if (ehci->bus_suspended && ehci->has_hostpc) {
@@ -401,6 +408,8 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		spin_unlock_irq(&ehci->lock);
 		msleep(5);
 		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
 	}
 
 	/* manually resume the ports we suspended during bus_suspend() */
@@ -421,6 +430,8 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 		spin_unlock_irq(&ehci->lock);
 		msleep(20);
 		spin_lock_irq(&ehci->lock);
+		if (ehci->shutdown)
+			goto shutdown;
 	}
 
 	i = HCS_N_PORTS (ehci->hcs_params);
@@ -439,10 +450,18 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
 	ehci_handover_companion_ports(ehci);
 
 	/* Now we can safely re-enable irqs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->shutdown)
+		goto shutdown;
 	ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
 	(void) ehci_readl(ehci, &ehci->regs->intr_enable);
+	spin_unlock_irq(&ehci->lock);
 
 	return 0;
+
+ shutdown:
+	spin_unlock_irq(&ehci->lock);
+	return -ESHUTDOWN;
 }
 
 #else

drivers/usb/host/ehci.h

@@ -118,6 +118,7 @@ struct ehci_hcd {			/* one per controller */
 	bool			need_rescan:1;
 	bool			intr_unlinking:1;
 	bool			async_unlinking:1;
+	bool			shutdown:1;
 	struct ehci_qh		*qh_scan_next;
 
 	/* async schedule support */