arm64: zynqmp: Turn comment to gpio-line-names

Label gpio lines properly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts

@@ -125,21 +125,11 @@ &i2c0 {
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - PS_GTR_LAN_SEL0
-		 * 1 - PS_GTR_LAN_SEL1
-		 * 2 - PS_GTR_LAN_SEL2
-		 * 3 - PS_GTR_LAN_SEL3
-		 * 4 - PCI_CLK_DIR_SEL
-		 * 5 - IIC_MUX_RESET_B
-		 * 6 - GEM3_EXP_RESET_B
-		 * 7, 10 - 17 - not connected
-		 */
-
+		gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+				"PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+				"", "", "", "", "", "", "", "", "";
 		gtr-sel0 {
 			gpio-hog;
 			gpios = <0 0>;
@@ -169,27 +159,12 @@ gtr-sel3 {
 	tca6416_u61: gpio@21 {
 		compatible = "ti,tca6416";
 		reg = <0x21>;
-		gpio-controller;
+		gpio-controller; /* IRQ not connected */
 		#gpio-cells = <2>;
-		/*
-		 * IRQ not connected
-		 * Lines:
-		 * 0 - VCCPSPLL_EN
-		 * 1 - MGTRAVCC_EN
-		 * 2 - MGTRAVTT_EN
-		 * 3 - VCCPSDDRPLL_EN
-		 * 4 - MIO26_PMU_INPUT_LS
-		 * 5 - PL_PMBUS_ALERT
-		 * 6 - PS_PMBUS_ALERT
-		 * 7 - MAXIM_PMBUS_ALERT
-		 * 10 - PL_DDR4_VTERM_EN
-		 * 11 - PL_DDR4_VPP_2V5_EN
-		 * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
-		 * 13 - PS_DIMM_SUSPEND_EN
-		 * 14 - PS_DDR4_VTERM_EN
-		 * 15 - PS_DDR4_VPP_2V5_EN
-		 * 16 - 17 - not connected
-		 */
+		gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+				"PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+				"PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+				"PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
 	};
 
 	i2c-mux@75 { /* u60 */