Commit 44f82312 authored by Reinhard Speyerer's avatar Reinhard Speyerer Committed by David S. Miller

qmi_wwan: add network device usage statistics for qmimux devices

Add proper network device usage statistics for qmimux devices
instead of reporting all-zero values for them.

Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support")
Cc: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: default avatarReinhard Speyerer <rspmn@arcor.de>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 61356088
......@@ -22,6 +22,7 @@
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
#include <linux/usb/cdc-wdm.h>
#include <linux/u64_stats_sync.h>
/* This driver supports wwan (3G/LTE/?) devices using a vendor
* specific management protocol called Qualcomm MSM Interface (QMI) -
......@@ -75,6 +76,7 @@ struct qmimux_hdr {
struct qmimux_priv {
struct net_device *real_dev;
u8 mux_id;
struct pcpu_sw_netstats __percpu *stats64;
};
static int qmimux_open(struct net_device *dev)
......@@ -101,19 +103,65 @@ static netdev_tx_t qmimux_start_xmit(struct sk_buff *skb, struct net_device *dev
struct qmimux_priv *priv = netdev_priv(dev);
unsigned int len = skb->len;
struct qmimux_hdr *hdr;
netdev_tx_t ret;
hdr = skb_push(skb, sizeof(struct qmimux_hdr));
hdr->pad = 0;
hdr->mux_id = priv->mux_id;
hdr->pkt_len = cpu_to_be16(len);
skb->dev = priv->real_dev;
return dev_queue_xmit(skb);
ret = dev_queue_xmit(skb);
if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
struct pcpu_sw_netstats *stats64 = this_cpu_ptr(priv->stats64);
u64_stats_update_begin(&stats64->syncp);
stats64->tx_packets++;
stats64->tx_bytes += len;
u64_stats_update_end(&stats64->syncp);
} else {
dev->stats.tx_dropped++;
}
return ret;
}
static void qmimux_get_stats64(struct net_device *net,
struct rtnl_link_stats64 *stats)
{
struct qmimux_priv *priv = netdev_priv(net);
unsigned int start;
int cpu;
netdev_stats_to_stats64(stats, &net->stats);
for_each_possible_cpu(cpu) {
struct pcpu_sw_netstats *stats64;
u64 rx_packets, rx_bytes;
u64 tx_packets, tx_bytes;
stats64 = per_cpu_ptr(priv->stats64, cpu);
do {
start = u64_stats_fetch_begin_irq(&stats64->syncp);
rx_packets = stats64->rx_packets;
rx_bytes = stats64->rx_bytes;
tx_packets = stats64->tx_packets;
tx_bytes = stats64->tx_bytes;
} while (u64_stats_fetch_retry_irq(&stats64->syncp, start));
stats->rx_packets += rx_packets;
stats->rx_bytes += rx_bytes;
stats->tx_packets += tx_packets;
stats->tx_bytes += tx_bytes;
}
}
static const struct net_device_ops qmimux_netdev_ops = {
.ndo_open = qmimux_open,
.ndo_stop = qmimux_stop,
.ndo_start_xmit = qmimux_start_xmit,
.ndo_open = qmimux_open,
.ndo_stop = qmimux_stop,
.ndo_start_xmit = qmimux_start_xmit,
.ndo_get_stats64 = qmimux_get_stats64,
};
static void qmimux_setup(struct net_device *dev)
......@@ -198,8 +246,19 @@ static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
}
skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
if (netif_rx(skbn) != NET_RX_SUCCESS)
if (netif_rx(skbn) != NET_RX_SUCCESS) {
net->stats.rx_errors++;
return 0;
} else {
struct pcpu_sw_netstats *stats64;
struct qmimux_priv *priv = netdev_priv(net);
stats64 = this_cpu_ptr(priv->stats64);
u64_stats_update_begin(&stats64->syncp);
stats64->rx_packets++;
stats64->rx_bytes += pkt_len;
u64_stats_update_end(&stats64->syncp);
}
skip:
offset += len + qmimux_hdr_sz;
......@@ -223,6 +282,12 @@ static int qmimux_register_device(struct net_device *real_dev, u8 mux_id)
priv->mux_id = mux_id;
priv->real_dev = real_dev;
priv->stats64 = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!priv->stats64) {
err = -ENOBUFS;
goto out_free_newdev;
}
err = register_netdevice(new_dev);
if (err < 0)
goto out_free_newdev;
......@@ -252,6 +317,7 @@ static void qmimux_unregister_device(struct net_device *dev)
struct qmimux_priv *priv = netdev_priv(dev);
struct net_device *real_dev = priv->real_dev;
free_percpu(priv->stats64);
netdev_upper_dev_unlink(real_dev, dev);
unregister_netdevice(dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment