Commit 45021d35 authored by Srinivas Kandagatla's avatar Srinivas Kandagatla Committed by Bjorn Andersson

arm64: dts: qcom: c630: Enable audio support

This patch add support to audio via WSA881x Speakers and Headset.
Reviewed-by: default avatarVinod Koul <vkoul@kernel.org>
Tested-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200312143024.11059-4-srinivas.kandagatla@linaro.org
[bjorn: Sorted nodes]
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 3898fdc1
...@@ -7,7 +7,10 @@ ...@@ -7,7 +7,10 @@
/dts-v1/; /dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi" #include "sdm845.dtsi"
#include "pm8998.dtsi" #include "pm8998.dtsi"
...@@ -353,6 +356,75 @@ &qupv3_id_1 { ...@@ -353,6 +356,75 @@ &qupv3_id_1 {
status = "okay"; status = "okay";
}; };
&q6asmdai {
dai@0 {
reg = <0>;
direction = <2>;
};
dai@1 {
reg = <1>;
direction = <1>;
};
};
&sound {
compatible = "qcom,db845c-sndcard";
model = "Lenovo-YOGA-C630-13Q50";
audio-routing =
"RX_BIAS", "MCLK",
"AMIC2", "MIC BIAS2",
"SpkrLeft IN", "SPK1 OUT",
"SpkrRight IN", "SPK2 OUT",
"MM_DL1", "MultiMedia1 Playback",
"MultiMedia2 Capture", "MM_UL2";
mm1-dai-link {
link-name = "MultiMedia1";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
};
};
mm2-dai-link {
link-name = "MultiMedia2";
cpu {
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
};
};
slim-dai-link {
link-name = "SLIM Playback";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_RX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
};
};
slimcap-dai-link {
link-name = "SLIM Capture";
cpu {
sound-dai = <&q6afedai SLIMBUS_0_TX>;
};
platform {
sound-dai = <&q6routing>;
};
codec {
sound-dai = <&wcd9340 1>;
};
};
};
&tlmm { &tlmm {
gpio-reserved-ranges = <0 4>, <81 4>; gpio-reserved-ranges = <0 4>, <81 4>;
...@@ -382,6 +454,15 @@ i2c12_hid_active: i2c12-hid-active { ...@@ -382,6 +454,15 @@ i2c12_hid_active: i2c12-hid-active {
bias-pull-up; bias-pull-up;
drive-strength = <2>; drive-strength = <2>;
}; };
wcd_intr_default: wcd_intr_default {
pins = <54>;
function = "gpio";
input-enable;
bias-pull-down;
drive-strength = <2>;
};
}; };
&uart6 { &uart6 {
...@@ -465,3 +546,36 @@ &usb_2_qmpphy { ...@@ -465,3 +546,36 @@ &usb_2_qmpphy {
vdda-phy-supply = <&vdda_usb2_ss_1p2>; vdda-phy-supply = <&vdda_usb2_ss_1p2>;
vdda-pll-supply = <&vdda_usb2_ss_core>; vdda-pll-supply = <&vdda_usb2_ss_core>;
}; };
&wcd9340{
pinctrl-0 = <&wcd_intr_default>;
pinctrl-names = "default";
clock-names = "extclk";
clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
reset-gpios = <&tlmm 64 0>;
vdd-buck-supply = <&vreg_s4a_1p8>;
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
vdd-tx-supply = <&vreg_s4a_1p8>;
vdd-rx-supply = <&vreg_s4a_1p8>;
vdd-io-supply = <&vreg_s4a_1p8>;
swm: swm@c85 {
left_spkr: wsa8810-left{
compatible = "sdw10217211000";
reg = <0 3>;
powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrLeft";
#sound-dai-cells = <0>;
};
right_spkr: wsa8810-right{
compatible = "sdw10217211000";
powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
reg = <0 4>;
#thermal-sensor-cells = <0>;
sound-name-prefix = "SpkrRight";
#sound-dai-cells = <0>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment