Commit 454e6cb6 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by David S. Miller

sky2: handle dma mapping errors

On non-x86 platforms it is possible to run out of DMA mapping resources.
The driver was ignoring this and could cause corruptions.
Signed-off-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 1bd68c04
......@@ -1068,13 +1068,16 @@ static void sky2_rx_submit(struct sky2_port *sky2,
}
static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
static int sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
unsigned size)
{
struct sk_buff *skb = re->skb;
int i;
re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE);
if (unlikely(pci_dma_mapping_error(pdev, re->data_addr)))
return -EIO;
pci_unmap_len_set(re, data_size, size);
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
......@@ -1083,6 +1086,7 @@ static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re,
skb_shinfo(skb)->frags[i].page_offset,
skb_shinfo(skb)->frags[i].size,
PCI_DMA_FROMDEVICE);
return 0;
}
static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re)
......@@ -1354,7 +1358,12 @@ static int sky2_rx_start(struct sky2_port *sky2)
if (!re->skb)
goto nomem;
sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size);
if (sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size)) {
dev_kfree_skb(re->skb);
re->skb = NULL;
goto nomem;
}
sky2_rx_submit(sky2, re);
}
......@@ -1547,7 +1556,7 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
struct sky2_hw *hw = sky2->hw;
struct sky2_tx_le *le = NULL;
struct tx_ring_info *re;
unsigned i, len;
unsigned i, len, first_slot;
dma_addr_t mapping;
u16 mss;
u8 ctrl;
......@@ -1555,13 +1564,17 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
if (unlikely(tx_avail(sky2) < tx_le_req(skb)))
return NETDEV_TX_BUSY;
if (unlikely(netif_msg_tx_queued(sky2)))
printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
dev->name, sky2->tx_prod, skb->len);
len = skb_headlen(skb);
mapping = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(hw->pdev, mapping))
goto mapping_error;
first_slot = sky2->tx_prod;
if (unlikely(netif_msg_tx_queued(sky2)))
printk(KERN_DEBUG "%s: tx queued, slot %u, len %d\n",
dev->name, first_slot, skb->len);
/* Send high bits if needed */
if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
......@@ -1648,6 +1661,9 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
mapping = pci_map_page(hw->pdev, frag->page, frag->page_offset,
frag->size, PCI_DMA_TODEVICE);
if (pci_dma_mapping_error(hw->pdev, mapping))
goto mapping_unwind;
if (sizeof(dma_addr_t) > sizeof(u32)) {
le = get_tx_le(sky2);
le->addr = cpu_to_le32(upper_32_bits(mapping));
......@@ -1676,6 +1692,34 @@ static int sky2_xmit_frame(struct sk_buff *skb, struct net_device *dev)
dev->trans_start = jiffies;
return NETDEV_TX_OK;
mapping_unwind:
for (i = first_slot; i != sky2->tx_prod; i = RING_NEXT(i, TX_RING_SIZE)) {
le = sky2->tx_le + i;
re = sky2->tx_ring + i;
switch(le->opcode & ~HW_OWNER) {
case OP_LARGESEND:
case OP_PACKET:
pci_unmap_single(hw->pdev,
pci_unmap_addr(re, mapaddr),
pci_unmap_len(re, maplen),
PCI_DMA_TODEVICE);
break;
case OP_BUFFER:
pci_unmap_page(hw->pdev, pci_unmap_addr(re, mapaddr),
pci_unmap_len(re, maplen),
PCI_DMA_TODEVICE);
break;
}
}
sky2->tx_prod = first_slot;
mapping_error:
if (net_ratelimit())
dev_warn(&hw->pdev->dev, "%s: tx mapping error\n", dev->name);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
/*
......@@ -2191,7 +2235,11 @@ static struct sk_buff *receive_new(struct sky2_port *sky2,
prefetch(skb->data);
re->skb = nskb;
sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space);
if (sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space)) {
dev_kfree_skb(nskb);
re->skb = skb;
return NULL;
}
if (skb_shinfo(skb)->nr_frags)
skb_put_frags(skb, hdr_space, length);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment