Commit 45c77fb4 authored by Paolo Abeni's avatar Paolo Abeni

Merge branch 'emaclite-improve-error-handling-and-minor-cleanup'

Radhey Shyam Pandey says:

====================
emaclite: improve error handling and minor cleanup

This patchset does error handling for of_address_to_resource() and also
removes "Don't advertise 1000BASE-T" and auto negotiation.

Changes for v3:
- Resolve git apply conflicts for 2/2 patch.

Changes for v2:
- Added Andrew's reviewed by tag in 1/2 patch.
- Move ret to down to align with reverse xmas tree style in 2/2 patch.
- Also add fixes tag in 2/2 patch.
- Specify tree name in subject prefix.
====================

Link: https://lore.kernel.org/r/1651476470-23904-1-git-send-email-radhey.shyam.pandey@xilinx.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
parents 79396934 7a6bc33a
......@@ -823,10 +823,10 @@ static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
{
struct mii_bus *bus;
int rc;
struct resource res;
struct device_node *np = of_get_parent(lp->phy_node);
struct device_node *npp;
int rc, ret;
/* Don't register the MDIO bus if the phy_node or its parent node
* can't be found.
......@@ -836,8 +836,14 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
return -ENODEV;
}
npp = of_get_parent(np);
of_address_to_resource(npp, 0, &res);
ret = of_address_to_resource(npp, 0, &res);
of_node_put(npp);
if (ret) {
dev_err(dev, "%s resource error!\n",
dev->of_node->full_name);
of_node_put(np);
return ret;
}
if (lp->ndev->mem_start != res.start) {
struct phy_device *phydev;
phydev = of_phy_find_device(lp->phy_node);
......@@ -846,6 +852,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
"MDIO of the phy is not registered yet\n");
else
put_device(&phydev->mdio.dev);
of_node_put(np);
return 0;
}
......@@ -858,6 +865,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
bus = mdiobus_alloc();
if (!bus) {
dev_err(dev, "Failed to allocate mdiobus\n");
of_node_put(np);
return -ENOMEM;
}
......@@ -870,6 +878,7 @@ static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
bus->parent = dev;
rc = of_mdiobus_register(bus, np);
of_node_put(np);
if (rc) {
dev_err(dev, "Failed to register mdio bus.\n");
goto err_register;
......@@ -926,8 +935,6 @@ static int xemaclite_open(struct net_device *dev)
xemaclite_disable_interrupts(lp);
if (lp->phy_node) {
u32 bmcr;
lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
xemaclite_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
......@@ -938,19 +945,6 @@ static int xemaclite_open(struct net_device *dev)
/* EmacLite doesn't support giga-bit speeds */
phy_set_max_speed(lp->phy_dev, SPEED_100);
/* Don't advertise 1000BASE-T Full/Half duplex speeds */
phy_write(lp->phy_dev, MII_CTRL1000, 0);
/* Advertise only 10 and 100mbps full/half duplex speeds */
phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
ADVERTISE_CSMA);
/* Restart auto negotiation */
bmcr = phy_read(lp->phy_dev, MII_BMCR);
bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
phy_write(lp->phy_dev, MII_BMCR, bmcr);
phy_start(lp->phy_dev);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment