riscv: dts: starfive: fix jh7110 qspi sort order

Emil pointed out that "13010000 sorts after 12070000". Reshuffle the
entries to be in-order.
Reported-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

arch/riscv/boot/dts/starfive/jh7110.dtsi

@@ -676,25 +676,6 @@ i2c6: i2c@12060000 {
 			status = "disabled";
 		};
 
-		qspi: spi@13010000 {
-			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
-			reg = <0x0 0x13010000 0x0 0x10000>,
-			      <0x0 0x21000000 0x0 0x400000>;
-			interrupts = <25>;
-			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
-				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
-				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
-			clock-names = "ref", "ahb", "apb";
-			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
-				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
-				 <&syscrg JH7110_SYSRST_QSPI_REF>;
-			reset-names = "qspi", "qspi-ocp", "rstc_ref";
-			cdns,fifo-depth = <256>;
-			cdns,fifo-width = <4>;
-			cdns,trigger-address = <0x0>;
-			status = "disabled";
-		};
-
 		spi3: spi@12070000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x0 0x12070000 0x0 0x10000>;
@@ -767,6 +748,25 @@ sfctemp: temperature-sensor@120e0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
+		qspi: spi@13010000 {
+			compatible = "starfive,jh7110-qspi", "cdns,qspi-nor";
+			reg = <0x0 0x13010000 0x0 0x10000>,
+			      <0x0 0x21000000 0x0 0x400000>;
+			interrupts = <25>;
+			clocks = <&syscrg JH7110_SYSCLK_QSPI_REF>,
+				 <&syscrg JH7110_SYSCLK_QSPI_AHB>,
+				 <&syscrg JH7110_SYSCLK_QSPI_APB>;
+			clock-names = "ref", "ahb", "apb";
+			resets = <&syscrg JH7110_SYSRST_QSPI_APB>,
+				 <&syscrg JH7110_SYSRST_QSPI_AHB>,
+				 <&syscrg JH7110_SYSRST_QSPI_REF>;
+			reset-names = "qspi", "qspi-ocp", "rstc_ref";
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			status = "disabled";
+		};
+
 		syscrg: clock-controller@13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;