arm64: dts: rockchip: Enable the USB 2.0 ports on ODROID-M1

The Rockchip RK3568 has two USB OHCI/EHCI controllers connected to a PHY
providing one host-only port and one OTG port. On the ODROID-M1, they
are both used in host mode. The USB ports are powered by a DC/DC
converter providing 5V and named VCC5V0_SYS on the schematics, followed
by a power switch.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Dan Johansen <strit@manjaro.org>
Link: https://lore.kernel.org/r/20220930051246.391614-10-aurelien@aurel32.netSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts

@@ -105,6 +105,28 @@ vcc3v3_sys: vcc3v3-sys-regulator {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&dc_12v>;
 	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb_host";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
 &cpu0 {
@@ -463,6 +485,15 @@ hp_det_pin: hp-det-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb {
+		vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		vcc5v0_usb_otg_en_pin: vcc5v0-usb-otg-en-pin {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -561,6 +592,36 @@ &uart2 {
 	status = "okay";
 };
 
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
 &vop {
 	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;