powerpc/8xx: Use SPRG2 and DAR registers to stash r11 and cr.

This avoids storing these registers in memory.
CPU6 errata will still use the old way.
Remove some G2 leftover accesses from 2.4
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

arch/powerpc/kernel/head_8xx.S

@@ -71,9 +71,6 @@ _ENTRY(_start);
  * in the first level table, but that would require many changes to the
  * Linux page directory/table functions that I don't want to do right now.
  *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
  *	-- Dan
  */
 	.globl	__start
@@ -302,8 +299,13 @@ InstructionTLBMiss:
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
 #ifdef CONFIG_8xx_CPU15
 	addi	r11, r10, 0x1000
@@ -359,13 +361,19 @@ InstructionTLBMiss:
 	DO_8xx_CPU6(0x2d80, r3)
 	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 2:
 	mfspr	r11, SPRN_SRR1
@@ -375,13 +383,20 @@ InstructionTLBMiss:
 	rlwinm	r11, r11, 0, 0xffff
 	mtspr	SPRN_SRR1, r11
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	li	r11, 0x00f0
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	b	InstructionAccess
 
 	. = 0x1200
@@ -392,8 +407,13 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3f80, r3)
 	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
 	mfcr	r10
+#ifdef CONFIG_8xx_CPU6
 	stw	r10, 0(r0)
 	stw	r11, 4(r0)
+#else
+	mtspr	SPRN_DAR, r10
+	mtspr	SPRN_SPRG2, r11
+#endif
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -461,18 +481,24 @@ DataStoreTLBMiss:
 	 * of the MMU.
 	 */
 2:	li	r11, 0x00f0
-	mtspr	SPRN_DAR,r11	/* Tag DAR */
 	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
 	DO_8xx_CPU6(0x3d80, r3)
 	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
 
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
+	/* Restore registers */
+#ifndef CONFIG_8xx_CPU6
+	mfspr	r10, SPRN_DAR
+	mtcr	r10
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	mfspr	r11, SPRN_SPRG2
+#else
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	lwz	r11, 0(r0)
 	mtcr	r11
 	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
 	lwz	r3, 8(r0)
 #endif
+	mfspr	r10, SPRN_M_TW
 	rfi
 
 /* This is an instruction TLB error on the MPC8xx.  This could be due
@@ -684,9 +710,6 @@ start_here:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
 	mtspr	SPRN_SPRG_THREAD,r4
-	li	r3,0
-	/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
 
 	/* stack */
 	lis	r1,init_thread_union@ha