Commit 46fc4c90 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville

ssb: implement spurious tone avoidance

And make use of it in b43. This fixes a regression introduced with
49d55cef
b43: N-PHY: implement spurious tone avoidance
This commit made BCM4322 use only MCS 0 on channel 13, which of course
resulted in performance drop (down to 0.7Mb/s).
Reported-by: default avatarStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 25b5632f
......@@ -5165,7 +5165,8 @@ static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
#endif
#ifdef CONFIG_B43_SSB
case B43_BUS_SSB:
/* FIXME */
ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco,
avoid);
break;
#endif
}
......
......@@ -675,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
return 0;
}
}
void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid)
{
u32 pmu_ctl = 0;
switch (cc->dev->bus->chip_id) {
case 0x4322:
ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070);
ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a);
ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854);
if (spuravoid == 1)
ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828);
else
ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828);
pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD;
break;
case 43222:
/* TODO: BCM43222 requires updating PLLs too */
return;
default:
ssb_printk(KERN_ERR PFX
"Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
cc->dev->bus->chip_id);
return;
}
chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl);
}
EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate);
......@@ -219,6 +219,7 @@
#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400
#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
......@@ -667,5 +668,6 @@ enum ssb_pmu_ldo_volt_id {
void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
enum ssb_pmu_ldo_volt_id id, u32 voltage);
void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid);
#endif /* LINUX_SSB_CHIPCO_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment