watchdog: fix syntactic kernel-doc issues

The command 'find drivers/watchdog | xargs ./scripts/kernel-doc -none'
reports a number of kernel-doc warnings in the watchdog subsystem.

Address the kernel-doc warnings that were purely syntactic issues with
kernel-doc comments.

The remaining kernel-doc warnings are of type "Excess function parameter"
and "Function parameter or member not described". These warnings would
need to be addressed in a second pass with a bit more insight into the
APIs and purpose of the functions in the watchdog subsystem.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210322065337.617-1-lukas.bulwahn@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>

drivers/watchdog/booke_wdt.c

@@ -148,7 +148,7 @@ static void __booke_wdt_enable(void *data)
 }
 
 /**
- * booke_wdt_disable - disable the watchdog on the given CPU
+ * __booke_wdt_disable - disable the watchdog on the given CPU
  *
  * This function is called on each CPU.  It disables the watchdog on that CPU.
  *

drivers/watchdog/eurotechwdt.c

@@ -392,7 +392,7 @@ static struct notifier_block eurwdt_notifier = {
 };
 
 /**
- * cleanup_module:
+ * eurwdt_exit:
  *
  * Unload the watchdog. You cannot do this with any file handles open.
  * If your watchdog is set to continue ticking on close and you unload

drivers/watchdog/mei_wdt.c

@@ -105,7 +105,7 @@ struct mei_wdt {
 #endif /* CONFIG_DEBUG_FS */
 };
 
-/*
+/**
  * struct mei_mc_hdr - Management Control Command Header
  *
  * @command: Management Control (0x2)
@@ -121,7 +121,7 @@ struct mei_mc_hdr {
 };
 
 /**
- * struct mei_wdt_start_request watchdog start/ping
+ * struct mei_wdt_start_request - watchdog start/ping
  *
  * @hdr: Management Control Command Header
  * @timeout: timeout value
@@ -134,7 +134,7 @@ struct mei_wdt_start_request {
 } __packed;
 
 /**
- * struct mei_wdt_start_response watchdog start/ping response
+ * struct mei_wdt_start_response - watchdog start/ping response
  *
  * @hdr: Management Control Command Header
  * @status: operation status
@@ -474,7 +474,7 @@ static void mei_wdt_rx(struct mei_cl_device *cldev)
 		complete(&wdt->response);
 }
 
-/*
+/**
  * mei_wdt_notif - callback for event notification
  *
  * @cldev: bus device

drivers/watchdog/octeon-wdt-main.c

@@ -119,7 +119,7 @@ static int cpu2core(int cpu)
 }
 
 /**
- * Poke the watchdog when an interrupt is received
+ * octeon_wdt_poke_irq - Poke the watchdog when an interrupt is received
  *
  * @cpl:
  * @dev_id:
@@ -153,7 +153,7 @@ static irqreturn_t octeon_wdt_poke_irq(int cpl, void *dev_id)
 extern int prom_putchar(char c);
 
 /**
- * Write a string to the uart
+ * octeon_wdt_write_string - Write a string to the uart
  *
  * @str:        String to write
  */
@@ -165,7 +165,7 @@ static void octeon_wdt_write_string(const char *str)
 }
 
 /**
- * Write a hex number out of the uart
+ * octeon_wdt_write_hex() - Write a hex number out of the uart
  *
  * @value:      Number to display
  * @digits:     Number of digits to print (1 to 16)
@@ -192,6 +192,8 @@ static const char reg_name[][3] = {
 };
 
 /**
+ * octeon_wdt_nmi_stage3:
+ *
  * NMI stage 3 handler. NMIs are handled in the following manner:
  * 1) The first NMI handler enables CVMSEG and transfers from
  * the bootbus region into normal memory. It is careful to not
@@ -513,7 +515,7 @@ static struct watchdog_device octeon_wdt = {
 
 static enum cpuhp_state octeon_wdt_online;
 /**
- * Module/ driver initialization.
+ * octeon_wdt_init - Module/ driver initialization.
  *
  * Returns Zero on success
  */
@@ -585,7 +587,7 @@ static int __init octeon_wdt_init(void)
 }
 
 /**
- * Module / driver shutdown
+ * octeon_wdt_cleanup - Module / driver shutdown
  */
 static void __exit octeon_wdt_cleanup(void)
 {

drivers/watchdog/pc87413_wdt.c

@@ -445,7 +445,7 @@ static long pc87413_ioctl(struct file *file, unsigned int cmd,
 /* -- Notifier funtions -----------------------------------------*/
 
 /**
- *	notify_sys:
+ *	pc87413_notify_sys:
  *	@this: our notifier block
  *	@code: the event being reported
  *	@unused: unused

drivers/watchdog/wdt.c

@@ -494,7 +494,7 @@ static int wdt_temp_release(struct inode *inode, struct file *file)
 }
 
 /**
- *	notify_sys:
+ *	wdt_notify_sys:
  *	@this: our notifier block
  *	@code: the event being reported
  *	@unused: unused
@@ -558,7 +558,7 @@ static struct notifier_block wdt_notifier = {
 };
 
 /**
- *	cleanup_module:
+ *	wdt_exit:
  *
  *	Unload the watchdog. You cannot do this with any file handles open.
  *	If your watchdog is set to continue ticking on close and you unload

drivers/watchdog/wdt_pci.c

@@ -537,7 +537,7 @@ static int wdtpci_temp_release(struct inode *inode, struct file *file)
 }
 
 /**
- *	notify_sys:
+ *	wdtpci_notify_sys:
  *	@this: our notifier block
  *	@code: the event being reported
  *	@unused: unused