Merge tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck: "The most notable change is the removal of the amd_energy driver. It was rendered all but unusable by making its attributes privileged-only to work around a security issue. A suggested remedy was rejected by AMD, so the only real solution was to remove the driver. For the future, we'll have to make sure that no privileged-access-only drivers are accepted into the hwmon subsystem in the first place. The hwmon ABI document was updated accordingly. Other changes: PMBus drivers: - Added driver for MAX15301 - Added driver for BluTek BPA-RS600 - Added driver for fsp-3y PSUs and PDUs - Added driver for Infineon IR36021 - Added driver for ST STPDDC60 - Added support for TI TPS53676 to tps53679 driver - Introduced PMBUS symbol namespace. This was made necessary by a suggestion to use its exported functions from outside the hwmon subsystem. - Minor improvements and bug fixes New drivers: - Driver for NZXT Kraken X42/X52/X62/X72 Driver enhancements: - Added support for Intel D5005 to intel-m10-bmc-hwmon driver - Added support for NCT6686D to nct6683 driver Other: - Converted sch5627 and amd9240 drivers to hwmon_device_register_with_info() - Added support for fan drawers capability and present registers to mlxreg-fan driver - Added Dell Latitude E7440 to fan control whitelist in dell-smm driver - Replaced snprintf in show functions with sysfs_emit. Done with coccinelle script for all drivers to preempt endless per-driver submissions of the same change. - Use kobj_to_dev(). Another coccinelle based change to preempt endless per-driver submissions of the same change. - Various minor fixes and improvements" * tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits) hwmon: Remove amd_energy driver hwmon: Clarify scope of attribute access hwmon: (pmbus) Introduce PMBUS symbol namespace hwmon: (pmbus) Add pmbus driver for MAX15301 hwmon: (sch5627) Remove unnecessary error path hwmon: (sch5627) Use devres function hwmon: (pmbus/pxe1610) don't bail out when not all pages are active hwmon: Add driver for fsp-3y PSUs and PDUs hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card hwmon: (sch5627) Split sch5627_update_device() hwmon: (sch5627) Convert to hwmon_device_register_with_info() hwmon: (nct6683) remove useless function hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist MAINTAINERS: Add keyword pattern for hwmon registration functions hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers hwmon: (pmbus/tps53679) Add support for TI TPS53676 dt-bindings: Add trivial device entry for TPS53676 hwmon: (ftsteutates) Rudimentary typo fixes hwmon: (pmbus) Add driver for BluTek BPA-RS600 dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600 ...

Merge tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck: "The most notable change is the removal of the amd_energy driver. It was rendered all but unusable by making its attributes privileged-only to work around a security issue. A suggested remedy was rejected by AMD, so the only real solution was to remove the driver. For the future, we'll have to make sure that no privileged-access-only drivers are accepted into the hwmon subsystem in the first place. The hwmon ABI document was updated accordingly. Other changes: PMBus drivers: - Added driver for MAX15301 - Added driver for BluTek BPA-RS600 - Added driver for fsp-3y PSUs and PDUs - Added driver for Infineon IR36021 - Added driver for ST STPDDC60 - Added support for TI TPS53676 to tps53679 driver - Introduced PMBUS symbol namespace. This was made necessary by a suggestion to use its exported functions from outside the hwmon subsystem. - Minor improvements and bug fixes New drivers: - Driver for NZXT Kraken X42/X52/X62/X72 Driver enhancements: - Added support for Intel D5005 to intel-m10-bmc-hwmon driver - Added support for NCT6686D to nct6683 driver Other: - Converted sch5627 and amd9240 drivers to hwmon_device_register_with_info() - Added support for fan drawers capability and present registers to mlxreg-fan driver - Added Dell Latitude E7440 to fan control whitelist in dell-smm driver - Replaced snprintf in show functions with sysfs_emit. Done with coccinelle script for all drivers to preempt endless per-driver submissions of the same change. - Use kobj_to_dev(). Another coccinelle based change to preempt endless per-driver submissions of the same change. - Various minor fixes and improvements" * tag 'hwmon-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (38 commits) hwmon: Remove amd_energy driver hwmon: Clarify scope of attribute access hwmon: (pmbus) Introduce PMBUS symbol namespace hwmon: (pmbus) Add pmbus driver for MAX15301 hwmon: (sch5627) Remove unnecessary error path hwmon: (sch5627) Use devres function hwmon: (pmbus/pxe1610) don't bail out when not all pages are active hwmon: Add driver for fsp-3y PSUs and PDUs hwmon: (intel-m10-bmc-hwmon) add sensor support of Intel D5005 card hwmon: (sch5627) Split sch5627_update_device() hwmon: (sch5627) Convert to hwmon_device_register_with_info() hwmon: (nct6683) remove useless function hwmon: (dell-smm) Add Dell Latitude E7440 to fan control whitelist MAINTAINERS: Add keyword pattern for hwmon registration functions hwmon: (mlxreg-fan) Add support for fan drawers capability and present registers hwmon: (pmbus/tps53679) Add support for TI TPS53676 dt-bindings: Add trivial device entry for TPS53676 hwmon: (ftsteutates) Rudimentary typo fixes hwmon: (pmbus) Add driver for BluTek BPA-RS600 dt-bindings: Add vendor prefix and trivial device for BluTek BPA-RS600 ...
47080f22 · Linus Torvalds · 55ba0fe0 · 9049572f · 47080f22 · 47080f22
Commit 47080f22 authored Apr 26, 2021 by Linus Torvalds
93 changed files
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -50,6 +50,8 @@ properties:
          - atmel,atsha204a
            # i2c h/w elliptic curve crypto module
          - atmel,atecc508a
+            # BPA-RS600: Power Supply
+          - blutek,bpa-rs600
            # Bosch Sensortec pressure, temperature, humididty and VOC sensor
          - bosch,bme680
            # CM32181: Ambient Light Sensor
@@ -102,6 +104,8 @@ properties:
          - mps,mp2975
            # G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
          - gmt,g751
+            # Infineon IR36021 digital POL buck controller
+          - infineon,ir36021
            # Infineon IR38064 Voltage Regulator
          - infineon,ir38064
            # Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
@@ -288,6 +292,8 @@ properties:
          - ti,tmp103
            # Digital Temperature Sensor
          - ti,tmp275
+            # TI Dual channel DCAP+ multiphase controller TPS53676 with AVSBus
+          - ti,tps53676
            # TI Dual channel DCAP+ multiphase controller TPS53679
          - ti,tps53679
            # TI Dual channel DCAP+ multiphase controller TPS53688

--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -171,6 +171,8 @@ patternProperties:
    description: Beckhoff Automation GmbH & Co. KG
  "^bitmain,.*":
    description: Bitmain Technologies
+  "^blutek,.*":
+    description: BluTek Power
  "^boe,.*":
    description: BOE Technology Group Co., Ltd.
  "^bosch,.*":

--- a/Documentation/hwmon/amd_energy.rst
+++ b/Documentation/hwmon/amd_energy.rst
-.. SPDX-License-Identifier: GPL-2.0
-
-Kernel driver amd_energy
-==========================
-
-Supported chips:
-
-* AMD Family 17h Processors: Model 30h
-
-* AMD Family 19h Processors: Model 01h
-
-  Prefix: 'amd_energy'
-
-  Addresses used:  RAPL MSRs
-
-  Datasheets:
-
-  - Processor Programming Reference (PPR) for AMD Family 17h Model 01h, Revision B1 Processors
-
-	https://developer.amd.com/wp-content/resources/55570-B1_PUB.zip
-
-  - Preliminary Processor Programming Reference (PPR) for AMD Family 17h Model 31h, Revision B0 Processors
-
-	https://developer.amd.com/wp-content/resources/56176_ppr_Family_17h_Model_71h_B0_pub_Rev_3.06.zip
-
-Author: Naveen Krishna Chatradhi <nchatrad@amd.com>
-
-Description
-----------
-
-The Energy driver exposes the energy counters that are
-reported via the Running Average Power Limit (RAPL)
-Model-specific Registers (MSRs) via the hardware monitor
-(HWMON) sysfs interface.
-
-1. Power, Energy and Time Units
-   MSR_RAPL_POWER_UNIT/ C001_0299:
-   shared with all cores in the socket
-
-2. Energy consumed by each Core
-   MSR_CORE_ENERGY_STATUS/ C001_029A:
-   32-bitRO, Accumulator, core-level power reporting
-
-3. Energy consumed by Socket
-   MSR_PACKAGE_ENERGY_STATUS/ C001_029B:
-   32-bitRO, Accumulator, socket-level power reporting,
-   shared with all cores in socket
-
-These registers are updated every 1ms and cleared on
-reset of the system.
-
-Note: If SMT is enabled, Linux enumerates all threads as cpus.
-Since, the energy status registers are accessed at core level,
-reading those registers from the sibling threads would result
-in duplicate values. Hence, energy counter entries are not
-populated for the siblings.
-
-Energy Caluclation
------------------
-
-Energy information (in Joules) is based on the multiplier,
-1/2^ESU; where ESU is an unsigned integer read from
-MSR_RAPL_POWER_UNIT register. Default value is 10000b,
-indicating energy status unit is 15.3 micro-Joules increment.
-
-Reported values are scaled as per the formula
-
-scaled value = ((1/2^ESU) * (Raw value) * 1000000UL) in uJoules
-
-Users calculate power for a given domain by calculating
-	dEnergy/dTime for that domain.
-
-Energy accumulation
--------------------------
-
-Current, Socket energy status register is 32bit, assuming a 240W
-2P system, the register would wrap around in
-
-	2^32*15.3 e-6/240 * 2 = 547.60833024 secs to wrap(~9 mins)
-
-The Core energy register may wrap around after several days.
-
-To improve the wrap around time, a kernel thread is implemented
-to accumulate the socket energy counters and one core energy counter
-per run to a respective 64-bit counter. The kernel thread starts
-running during probe, wakes up every 100secs and stops running
-when driver is removed.
-
-Frequency of the accumulator thread is set during the probe
-based on the chosen energy unit resolution. For example
-A. fine grain (1.625 micro J)
-B. course grain (0.125 milli J)
-
-A socket and core energy read would return the current register
-value added to the respective energy accumulator.
-
-Sysfs attributes
----------------
-
-=============== ========  =====================================
-Attribute	Label	  Description
-===============	========  =====================================
-
-* For index N between [1] and [nr_cpus]
-
-===============	========  ======================================
-energy[N]_input EcoreX	  Core Energy   X = [0] to [nr_cpus - 1]
-			  Measured input core energy
-===============	========  ======================================
-
-* For N between [nr_cpus] and [nr_cpus + nr_socks]
-
-===============	========  ======================================
-energy[N]_input EsocketX  Socket Energy X = [0] to [nr_socks -1]
-			  Measured input socket energy
-=============== ========  ======================================
-
-Note: To address CVE-2020-12912, the visibility of the energy[N]_input
-attributes is restricted to owner and groups only.
--- a/Documentation/hwmon/bpa-rs600.rst
+++ b/Documentation/hwmon/bpa-rs600.rst
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver bpa-rs600
+=======================
+
+Supported chips:
+
+  * BPA-RS600-120
+
+    Datasheet: Publicly available at the BluTek website
+       http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
+
+Authors:
+      - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+Description
+-----------
+
+The BPA-RS600 is a compact 600W removable power supply module.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ============================================
+curr1_label             "iin"
+curr1_input		Measured input current
+curr1_max		Maximum input current
+curr1_max_alarm		Input current high alarm
+
+curr2_label		"iout1"
+curr2_input		Measured output current
+curr2_max		Maximum output current
+curr2_max_alarm		Output current high alarm
+
+fan1_input		Measured fan speed
+fan1_alarm		Fan warning
+fan1_fault		Fan fault
+
+in1_label		"vin"
+in1_input		Measured input voltage
+in1_max			Maximum input voltage
+in1_max_alarm		Input voltage high alarm
+in1_min			Minimum input voltage
+in1_min_alarm		Input voltage low alarm
+
+in2_label		"vout1"
+in2_input		Measured output voltage
+in2_max			Maximum output voltage
+in2_max_alarm		Output voltage high alarm
+in2_min			Maximum output voltage
+in2_min_alarm		Output voltage low alarm
+
+power1_label		"pin"
+power1_input		Measured input power
+power1_alarm		Input power alarm
+power1_max		Maximum input power
+
+power2_label		"pout1"
+power2_input		Measured output power
+power2_max		Maximum output power
+power2_max_alarm	Output power high alarm
+
+temp1_input		Measured temperature around input connector
+temp1_alarm		Temperature alarm
+
+temp2_input		Measured temperature around output connector
+temp2_alarm		Temperature alarm
+======================= ============================================
--- a/Documentation/hwmon/corsair-psu.rst
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -47,19 +47,30 @@ Sysfs entries
 =======================	========================================================
 curr1_input		Total current usage
 curr2_input		Current on the 12v psu rail
+curr2_crit		Current max critical value on the 12v psu rail
 curr3_input		Current on the 5v psu rail
+curr3_crit		Current max critical value on the 5v psu rail
 curr4_input		Current on the 3.3v psu rail
+curr4_crit		Current max critical value on the 3.3v psu rail
 fan1_input		RPM of psu fan
 in0_input		Voltage of the psu ac input
 in1_input		Voltage of the 12v psu rail
+in1_crit		Voltage max critical value on the 12v psu rail
+in1_lcrit		Voltage min critical value on the 12v psu rail
 in2_input		Voltage of the 5v psu rail
-in3_input		Voltage of the 3.3 psu rail
+in2_crit		Voltage max critical value on the 5v psu rail
+in2_lcrit		Voltage min critical value on the 5v psu rail
+in3_input		Voltage of the 3.3v psu rail
+in3_crit		Voltage max critical value on the 3.3v psu rail
+in3_lcrit		Voltage min critical value on the 3.3v psu rail
 power1_input		Total power usage
 power2_input		Power usage of the 12v psu rail
 power3_input		Power usage of the 5v psu rail
 power4_input		Power usage of the 3.3v psu rail
 temp1_input		Temperature of the psu vrm component
+temp1_crit		Temperature max cirtical value of the psu vrm component
 temp2_input		Temperature of the psu case
+temp2_crit		Temperature max critical value of psu case
 =======================	========================================================

 Usage Notes

--- a/Documentation/hwmon/fsp-3y.rst
+++ b/Documentation/hwmon/fsp-3y.rst
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver fsp3y
+======================
+Supported devices:
+  * 3Y POWER YH-5151E
+  * 3Y POWER YM-2151E
+
+Author: Václav Kubernát <kubernat@cesnet.cz>
+
+Description
+-----------
+This driver implements limited support for two 3Y POWER devices.
+
+Sysfs entries
+-------------
+  * in1_input            input voltage
+  * in2_input            12V output voltage
+  * in3_input            5V output voltage
+  * curr1_input          input current
+  * curr2_input          12V output current
+  * curr3_input          5V output current
+  * fan1_input           fan rpm
+  * temp1_input          temperature 1
+  * temp2_input          temperature 2
+  * temp3_input          temperature 3
+  * power1_input         input power
+  * power2_input         output power
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -39,12 +39,12 @@ Hardware Monitoring Kernel Drivers
   adt7475
   aht10
   amc6821
-   amd_energy
   asb100
   asc7621
   aspeed-pwm-tacho
   bcm54140
   bel-pfe
+   bpa-rs600
   bt1-pvt
   coretemp
   corsair-cpro
@@ -62,6 +62,7 @@ Hardware Monitoring Kernel Drivers
   f71805f
   f71882fg
   fam15h_power
+   fsp-3y
   ftsteutates
   g760a
   g762
@@ -77,6 +78,7 @@ Hardware Monitoring Kernel Drivers
   intel-m10-bmc-hwmon
   ir35221
   ir38064
+   ir36021
   isl68137
   it87
   jc42
@@ -112,6 +114,7 @@ Hardware Monitoring Kernel Drivers
   ltc4260
   ltc4261
   max127
+   max15301
   max16064
   max16065
   max1619
@@ -142,6 +145,7 @@ Hardware Monitoring Kernel Drivers
   npcm750-pwm-fan
   nsa320
   ntc_thermistor
+   nzxt-kraken2
   occ
   pc87360
   pc87427
@@ -168,6 +172,7 @@ Hardware Monitoring Kernel Drivers
   smsc47m192
   smsc47m1
   sparx5-temp
+   stpddc60
   tc654
   tc74
   thmc50

--- a/Documentation/hwmon/ir36021.rst
+++ b/Documentation/hwmon/ir36021.rst
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ir36021
+=====================
+
+Supported chips:
+
+  * Infineon IR36021
+
+    Prefix: ir36021
+    Addresses scanned: -
+
+    Datasheet: Publicly available at the Infineon website
+      https://www.infineon.com/dgdl/ir36021.pdf?fileId=5546d462533600a4015355d0aa2d1775
+
+Authors:
+      - Chris Packham <chris.packham@alliedtelesis.co.nz>
+
+Description
+-----------
+
+The IR36021 is a dual‐loop digital multi‐phase buck controller designed for
+point of load applications.
+
+Usage Notes
+-----------
+
+This driver does not probe for PMBus devices. You will have to instantiate
+devices explicitly.
+
+Sysfs attributes
+----------------
+
+======================= ===========================
+curr1_label             "iin"
+curr1_input             Measured input current
+curr1_alarm             Input fault alarm
+
+curr2_label             "iout1"
+curr2_input             Measured output current
+curr2_alarm             Output over-current alarm
+
+in1_label               "vin"
+in1_input               Measured input voltage
+in1_alarm               Input under-voltage alarm
+
+in2_label               "vout1"
+in2_input               Measured output voltage
+in2_alarm               Output over-voltage alarm
+
+power1_label            "pin"
+power1_input            Measured input power
+power1_alarm            Input under-voltage alarm
+
+power2_label            "pout1"
+power2_input            Measured output power
+
+temp1_input             Measured temperature
+temp1_alarm             Temperature alarm
+
+temp2_input             Measured other loop temperature
+temp2_alarm             Temperature alarm
+======================= ===========================
--- a/Documentation/hwmon/max15301.rst
+++ b/Documentation/hwmon/max15301.rst
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver max15301
+======================
+
+Supported chips:
+
+  * Maxim MAX15301
+
+    Prefix: 'max15301', 'bmr461'
+
+    Addresses scanned: -
+
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX15301.pdf
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Maxim MAX15301 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Module parameters
+-----------------
+
+delay
+-----
+
+The controller requires a minimum interval between I2C bus accesses.
+The default interval is set to 100 us. For manual override, the driver
+provides a writeable module parameter, 'delay', which can be used to
+set the interval to a value between 0 and 65,535 microseconds.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+======================= ========================================================
+in1_label		"vin"
+in1_input		Measured input voltage.
+in1_lcrit		Critical minimum input voltage.
+in1_crit		Critical maximum input voltage.
+in1_lcrit_alarm		Input voltage critical low alarm.
+in1_crit_alarm		Input voltage critical high alarm.
+
+in2_label		"vout1"
+in2_input		Measured output voltage.
+in2_lcrit		Critical minimum output Voltage.
+in2_crit		Critical maximum output voltage.
+in2_lcrit_alarm		Critical output voltage critical low alarm.
+in2_crit_alarm		Critical output voltage critical high alarm.
+
+curr1_label		"iout1"
+curr1_input		Measured output current.
+curr1_crit		Critical maximum output current.
+curr1_crit_alarm	Output current critical high alarm.
+
+temp1_input		Measured maximum temperature of all phases.
+temp1_max		Maximum temperature limit.
+temp1_max_alarm		High temperature alarm.
+temp1_crit		Critical maximum temperature limit.
+temp1_crit_alarm	Critical maximum temperature alarm.
+======================= ========================================================
--- a/Documentation/hwmon/nzxt-kraken2.rst
+++ b/Documentation/hwmon/nzxt-kraken2.rst
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver nzxt-kraken2
+==========================
+
+Supported devices:
+
+* NZXT Kraken X42
+* NZXT Kraken X52
+* NZXT Kraken X62
+* NZXT Kraken X72
+
+Author: Jonas Malaco
+
+Description
+-----------
+
+This driver enables hardware monitoring support for NZXT Kraken X42/X52/X62/X72
+all-in-one CPU liquid coolers.  Three sensors are available: fan speed, pump
+speed and coolant temperature.
+
+Fan and pump control, while supported by the firmware, are not currently
+exposed.  The addressable RGB LEDs, present in the integrated CPU water block
+and pump head, are not supported either.  But both features can be found in
+existing user-space tools (e.g. `liquidctl`_).
+
+.. _liquidctl: https://github.com/liquidctl/liquidctl
+
+Usage Notes
+-----------
+
+As these are USB HIDs, the driver can be loaded automatically by the kernel and
+supports hot swapping.
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+fan1_input		Fan speed (in rpm)
+fan2_input		Pump speed (in rpm)
+temp1_input		Coolant temperature (in millidegrees Celsius)
+=======================	========================================================
--- a/Documentation/hwmon/stpddc60.rst
+++ b/Documentation/hwmon/stpddc60.rst
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver stpddc60
+======================
+
+Supported chips:
+
+  * ST STPDDC60
+
+    Prefix: 'stpddc60', 'bmr481'
+
+    Addresses scanned: -
+
+    Datasheet: https://flexpowermodules.com/documents/fpm-techspec-bmr481
+
+Author: Erik Rosen <erik.rosen@metormote.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for ST STPDDC60 controller chip and
+compatible modules.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus.rst and Documentation.hwmon/pmbus-core for details
+on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
+details.
+
+The vout under- and over-voltage limits are set in relation to the commanded
+output voltage as a positive or negative offset in the interval 50mV to 400mV
+in 50mV steps. This means that the absolute values of the limits will change
+when the commanded output voltage changes. Also, care should be taken when
+writing to those limits since in the worst case the commanded output voltage
+could change at the same time as the limit is written to, wich will lead to
+unpredictable results.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Vin, iout, pout and temp limits
+are read-write; all other attributes are read-only.
+
+======================= ========================================================
+in1_label		"vin"
+in1_input		Measured input voltage.
+in1_lcrit		Critical minimum input voltage.
+in1_crit		Critical maximum input voltage.
+in1_lcrit_alarm		Input voltage critical low alarm.
+in1_crit_alarm		Input voltage critical high alarm.
+
+in2_label		"vout1"
+in2_input		Measured output voltage.
+in2_lcrit		Critical minimum output voltage.
+in2_crit		Critical maximum output voltage.
+in2_lcrit_alarm		Critical output voltage critical low alarm.
+in2_crit_alarm		Critical output voltage critical high alarm.
+
+curr1_label		"iout1"
+curr1_input		Measured output current.
+curr1_max		Maximum output current.
+curr1_max_alarm		Output current high alarm.
+curr1_crit		Critical maximum output current.
+curr1_crit_alarm	Output current critical high alarm.
+
+power1_label		"pout1"
+power1_input		Measured output power.
+power1_crit		Critical maximum output power.
+power1_crit_alarm	Output power critical high alarm.
+
+temp1_input		Measured maximum temperature of all phases.
+temp1_max		Maximum temperature limit.
+temp1_max_alarm		High temperature alarm.
+temp1_crit		Critical maximum temperature limit.
+temp1_crit_alarm	Critical maximum temperature alarm.
+======================= ========================================================
--- a/Documentation/hwmon/sysfs-interface.rst
+++ b/Documentation/hwmon/sysfs-interface.rst
@@ -65,6 +65,14 @@ the desired value must be written, note that strings which are not a number
 are interpreted as 0! For more on how written strings are interpreted see the
 "sysfs attribute writes interpretation" section at the end of this file.

+Attribute access
+----------------
+
+Hardware monitoring sysfs attributes are displayed by unrestricted userspace
+applications. For this reason, all standard ABI attributes shall be world
+readable. Writeable standard ABI attributes shall be writeable only for
+privileged users.
+
 -------------------------------------------------------------------------

 ======= ===========================================

--- a/Documentation/hwmon/tps53679.rst
+++ b/Documentation/hwmon/tps53679.rst
@@ -19,6 +19,14 @@ Supported chips:

    Datasheet: https://www.ti.com/lit/gpn/TPS53667

+  * Texas Instruments TPS53676
+
+    Prefix: 'tps53676'
+
+    Addresses scanned: -
+
+    Datasheet: https://www.ti.com/lit/gpn/TPS53676
+
  * Texas Instruments TPS53679

    Prefix: 'tps53679'
@@ -136,7 +144,7 @@ power1_input		Measured input power.
 power[N]_label		"pout[1-2]".

 			- TPS53647, TPS53667: N=2
-			- TPS53679, TPS53681, TPS53588: N=2,3
+			- TPS53676, TPS53679, TPS53681, TPS53588: N=2,3

 power[N]_input		Measured output power.

@@ -156,10 +164,11 @@ curr[N]_label		"iout[1-2]" or "iout1.[0-5]".

 			The first digit is the output channel, the second
 			digit is the phase within the channel. Per-phase
-			telemetry supported on TPS53681 only.
+			telemetry supported on TPS53676 and TPS53681 only.

 			- TPS53647, TPS53667: N=2
 			- TPS53679, TPS53588: N=2,3
+			- TPS53676: N=2-8
 			- TPS53681: N=2-9

 curr[N]_input		Measured output current.

--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -880,13 +880,6 @@ S:	Supported
 T:	git git://people.freedesktop.org/~agd5f/linux
 F:	drivers/gpu/drm/amd/display/

-AMD ENERGY DRIVER
-M:	Naveen Krishna Chatradhi <nchatrad@amd.com>
-L:	linux-hwmon@vger.kernel.org
-S:	Maintained
-F:	Documentation/hwmon/amd_energy.rst
-F:	drivers/hwmon/amd_energy.c
-
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
 M:	Huang Rui <ray.huang@amd.com>
 L:	linux-hwmon@vger.kernel.org
@@ -7927,6 +7920,7 @@ F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h
 F:	include/trace/events/hwmon*.h
+K:	(devm_)?hwmon_device_(un)?register(|_with_groups|_with_info)

 HARDWARE RANDOM NUMBER GENERATOR CORE
 M:	Matt Mackall <mpm@selenic.com>
@@ -10898,6 +10892,13 @@ S:	Orphan
 F:	drivers/video/fbdev/matrox/matroxfb_*
 F:	include/uapi/linux/matroxfb.h

+MAX15301 DRIVER
+M:	Daniel Nilsson <daniel.nilsson@flex.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/max15301.rst
+F:	drivers/hwmon/pmbus/max15301.c
+
 MAX16065 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org
@@ -13027,6 +13028,13 @@ L:	linux-nfc@lists.01.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/nfc/nxp-nci

+NZXT-KRAKEN2 HARDWARE MONITORING DRIVER
+M:	Jonas Malaco <jonas@protocubo.io>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/nzxt-kraken2.rst
+F:	drivers/hwmon/nzxt-kraken2.c
+
 OBJAGG
 M:	Jiri Pirko <jiri@nvidia.com>
 L:	netdev@vger.kernel.org
@@ -17068,6 +17076,13 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stm32*

+ST STPDDC60 DRIVER
+M:	Daniel Nilsson <daniel.nilsson@flex.com>
+L:	linux-hwmon@vger.kernel.org
+S:	Maintained
+F:	Documentation/hwmon/stpddc60.rst
+F:	drivers/hwmon/pmbus/stpddc60.c
+
 ST VL53L0X ToF RANGER(I2C) IIO DRIVER
 M:	Song Qiang <songqiang1304521@gmail.com>
 L:	linux-iio@vger.kernel.org

--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -321,16 +321,6 @@ config SENSORS_FAM15H_POWER
 	  This driver can also be built as a module. If so, the module
 	  will be called fam15h_power.

-config SENSORS_AMD_ENERGY
-	tristate "AMD RAPL MSR based Energy driver"
-	depends on X86
-	help
-	  If you say yes here you get support for core and package energy
-	  sensors, based on RAPL MSR for AMD family 17h and above CPUs.
-
-	  This driver can also be built as a module. If so, the module
-	  will be called as amd_energy.
-
 config SENSORS_APPLESMC
 	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
 	depends on INPUT && X86
@@ -1492,6 +1482,16 @@ config SENSORS_NSA320
 	  This driver can also be built as a module. If so, the module
 	  will be called nsa320-hwmon.

+config SENSORS_NZXT_KRAKEN2
+	tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers"
+	depends on USB_HID
+	help
+	  If you say yes here you get support for hardware monitoring for the
+	  NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nzxt-kraken2.
+
 source "drivers/hwmon/occ/Kconfig"

 config SENSORS_PCF8591

--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -155,6 +155,7 @@ obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
 obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
+obj-$(CONFIG_SENSORS_NZXT_KRAKEN2) += nzxt-kraken2.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
 obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o

--- a/drivers/hwmon/adc128d818.c
+++ b/drivers/hwmon/adc128d818.c
@@ -248,7 +248,7 @@ static ssize_t adc128_alarm_show(struct device *dev,
 static umode_t adc128_is_visible(struct kobject *kobj,
 				 struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct adc128_data *data = dev_get_drvdata(dev);

 	if (index < ADC128_ATTR_NUM_VOLT) {

--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
--- a/drivers/hwmon/amd_energy.c
+++ b/drivers/hwmon/amd_energy.c
-// SPDX-License-Identifier: GPL-2.0-only
-
-/*
- * Copyright (C) 2020 Advanced Micro Devices, Inc.
- */
-#include <asm/cpu_device_id.h>
-
-#include <linux/bits.h>
-#include <linux/cpu.h>
-#include <linux/cpumask.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/hwmon.h>
-#include <linux/kernel.h>
-#include <linux/kthread.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/processor.h>
-#include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/topology.h>
-#include <linux/types.h>
-
-#define DRVNAME			"amd_energy"
-
-#define ENERGY_PWR_UNIT_MSR	0xC0010299
-#define ENERGY_CORE_MSR		0xC001029A
-#define ENERGY_PKG_MSR		0xC001029B
-
-#define AMD_ENERGY_UNIT_MASK	0x01F00
-#define AMD_ENERGY_MASK		0xFFFFFFFF
-
-struct sensor_accumulator {
-	u64 energy_ctr;
-	u64 prev_value;
-};
-
-struct amd_energy_data {
-	struct hwmon_channel_info energy_info;
-	const struct hwmon_channel_info *info[2];
-	struct hwmon_chip_info chip;
-	struct task_struct *wrap_accumulate;
-	/* Lock around the accumulator */
-	struct mutex lock;
-	/* An accumulator for each core and socket */
-	struct sensor_accumulator *accums;
-	unsigned int timeout_ms;
-	/* Energy Status Units */
-	int energy_units;
-	int nr_cpus;
-	int nr_socks;
-	int core_id;
-	char (*label)[10];
-};
-
-static int amd_energy_read_labels(struct device *dev,
-				  enum hwmon_sensor_types type,
-				  u32 attr, int channel,
-				  const char **str)
-{
-	struct amd_energy_data *data = dev_get_drvdata(dev);
-
-	*str = data->label[channel];
-	return 0;
-}
-
-static void get_energy_units(struct amd_energy_data *data)
-{
-	u64 rapl_units;
-
-	rdmsrl_safe(ENERGY_PWR_UNIT_MSR, &rapl_units);
-	data->energy_units = (rapl_units & AMD_ENERGY_UNIT_MASK) >> 8;
-}
-
-static void accumulate_delta(struct amd_energy_data *data,
-			     int channel, int cpu, u32 reg)
-{
-	struct sensor_accumulator *accum;
-	u64 input;
-
-	mutex_lock(&data->lock);
-	rdmsrl_safe_on_cpu(cpu, reg, &input);
-	input &= AMD_ENERGY_MASK;
-
-	accum = &data->accums[channel];
-	if (input >= accum->prev_value)
-		accum->energy_ctr +=
-			input - accum->prev_value;
-	else
-		accum->energy_ctr += UINT_MAX -
-			accum->prev_value + input;
-
-	accum->prev_value = input;
-	mutex_unlock(&data->lock);
-}
-
-static void read_accumulate(struct amd_energy_data *data)
-{
-	int sock, scpu, cpu;
-
-	for (sock = 0; sock < data->nr_socks; sock++) {
-		scpu = cpumask_first_and(cpu_online_mask,
-					 cpumask_of_node(sock));
-
-		accumulate_delta(data, data->nr_cpus + sock,
-				 scpu, ENERGY_PKG_MSR);
-	}
-
-	if (data->core_id >= data->nr_cpus)
-		data->core_id = 0;
-
-	cpu = data->core_id;
-	if (cpu_online(cpu))
-		accumulate_delta(data, cpu, cpu, ENERGY_CORE_MSR);
-
-	data->core_id++;
-}
-
-static void amd_add_delta(struct amd_energy_data *data, int ch,
-			  int cpu, long *val, u32 reg)
-{
-	struct sensor_accumulator *accum;
-	u64 input;
-
-	mutex_lock(&data->lock);
-	rdmsrl_safe_on_cpu(cpu, reg, &input);
-	input &= AMD_ENERGY_MASK;
-
-	accum = &data->accums[ch];
-	if (input >= accum->prev_value)
-		input += accum->energy_ctr -
-				accum->prev_value;
-	else
-		input += UINT_MAX - accum->prev_value +
-				accum->energy_ctr;
-
-	/* Energy consumed = (1/(2^ESU) * RAW * 1000000UL) μJoules */
-	*val = div64_ul(input * 1000000UL, BIT(data->energy_units));
-
-	mutex_unlock(&data->lock);
-}
-
-static int amd_energy_read(struct device *dev,
-			   enum hwmon_sensor_types type,
-			   u32 attr, int channel, long *val)
-{
-	struct amd_energy_data *data = dev_get_drvdata(dev);
-	u32 reg;
-	int cpu;
-
-	if (channel >= data->nr_cpus) {
-		cpu = cpumask_first_and(cpu_online_mask,
-					cpumask_of_node
-					(channel - data->nr_cpus));
-		reg = ENERGY_PKG_MSR;
-	} else {
-		cpu = channel;
-		if (!cpu_online(cpu))
-			return -ENODEV;
-
-		reg = ENERGY_CORE_MSR;
-	}
-	amd_add_delta(data, channel, cpu, val, reg);
-
-	return 0;
-}
-
-static umode_t amd_energy_is_visible(const void *_data,
-				     enum hwmon_sensor_types type,
-				     u32 attr, int channel)
-{
-	return 0440;
-}
-
-static int energy_accumulator(void *p)
-{
-	struct amd_energy_data *data = (struct amd_energy_data *)p;
-	unsigned int timeout = data->timeout_ms;
-
-	while (!kthread_should_stop()) {
-		/*
-		 * Ignoring the conditions such as
-		 * cpu being offline or rdmsr failure
-		 */
-		read_accumulate(data);
-
-		set_current_state(TASK_INTERRUPTIBLE);
-		if (kthread_should_stop())
-			break;
-
-		schedule_timeout(msecs_to_jiffies(timeout));
-	}
-	return 0;
-}
-
-static const struct hwmon_ops amd_energy_ops = {
-	.is_visible = amd_energy_is_visible,
-	.read = amd_energy_read,
-	.read_string = amd_energy_read_labels,
-};
-
-static int amd_create_sensor(struct device *dev,
-			     struct amd_energy_data *data,
-			     enum hwmon_sensor_types type, u32 config)
-{
-	struct hwmon_channel_info *info = &data->energy_info;
-	struct sensor_accumulator *accums;
-	int i, num_siblings, cpus, sockets;
-	u32 *s_config;
-	char (*label_l)[10];
-
-	/* Identify the number of siblings per core */
-	num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1;
-
-	sockets = num_possible_nodes();
-
-	/*
-	 * Energy counter register is accessed at core level.
-	 * Hence, filterout the siblings.
-	 */
-	cpus = num_present_cpus() / num_siblings;
-
-	s_config = devm_kcalloc(dev, cpus + sockets + 1,
-				sizeof(u32), GFP_KERNEL);
-	if (!s_config)
-		return -ENOMEM;
-
-	accums = devm_kcalloc(dev, cpus + sockets,
-			      sizeof(struct sensor_accumulator),
-			      GFP_KERNEL);
-	if (!accums)
-		return -ENOMEM;
-
-	label_l = devm_kcalloc(dev, cpus + sockets,
-			       sizeof(*label_l), GFP_KERNEL);
-	if (!label_l)
-		return -ENOMEM;
-
-	info->type = type;
-	info->config = s_config;
-
-	data->nr_cpus = cpus;
-	data->nr_socks = sockets;
-	data->accums = accums;
-	data->label = label_l;
-
-	for (i = 0; i < cpus + sockets; i++) {
-		s_config[i] = config;
-		if (i < cpus)
-			scnprintf(label_l[i], 10, "Ecore%03u", i);
-		else
-			scnprintf(label_l[i], 10, "Esocket%u", (i - cpus));
-	}
-
-	s_config[i] = 0;
-	return 0;
-}
-
-static int amd_energy_probe(struct platform_device *pdev)
-{
-	struct device *hwmon_dev;
-	struct amd_energy_data *data;
-	struct device *dev = &pdev->dev;
-	int ret;
-
-	data = devm_kzalloc(dev,
-			    sizeof(struct amd_energy_data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->chip.ops = &amd_energy_ops;
-	data->chip.info = data->info;
-
-	dev_set_drvdata(dev, data);
-	/* Populate per-core energy reporting */
-	data->info[0] = &data->energy_info;
-	ret = amd_create_sensor(dev, data, hwmon_energy,
-				HWMON_E_INPUT | HWMON_E_LABEL);
-	if (ret)
-		return ret;
-
-	mutex_init(&data->lock);
-	get_energy_units(data);
-
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, DRVNAME,
-							 data,
-							 &data->chip,
-							 NULL);
-	if (IS_ERR(hwmon_dev))
-		return PTR_ERR(hwmon_dev);
-
-	/*
-	 * On a system with peak wattage of 250W
-	 * timeout = 2 ^ 32 / 2 ^ energy_units / 250 secs
-	 */
-	data->timeout_ms = 1000 *
-			   BIT(min(28, 31 - data->energy_units)) / 250;
-
-	data->wrap_accumulate = kthread_run(energy_accumulator, data,
-					    "%s", dev_name(hwmon_dev));
-	return PTR_ERR_OR_ZERO(data->wrap_accumulate);
-}
-
-static int amd_energy_remove(struct platform_device *pdev)
-{
-	struct amd_energy_data *data = dev_get_drvdata(&pdev->dev);
-
-	if (data && data->wrap_accumulate)
-		kthread_stop(data->wrap_accumulate);
-
-	return 0;
-}
-
-static const struct platform_device_id amd_energy_ids[] = {
-	{ .name = DRVNAME, },
-	{}
-};
-MODULE_DEVICE_TABLE(platform, amd_energy_ids);
-
-static struct platform_driver amd_energy_driver = {
-	.probe = amd_energy_probe,
-	.remove	= amd_energy_remove,
-	.id_table = amd_energy_ids,
-	.driver = {
-		.name = DRVNAME,
-	},
-};
-
-static struct platform_device *amd_energy_platdev;
-
-static const struct x86_cpu_id cpu_ids[] __initconst = {
-	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x17, 0x31, NULL),
-	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x01, NULL),
-	X86_MATCH_VENDOR_FAM_MODEL(AMD, 0x19, 0x30, NULL),
-	{}
-};
-MODULE_DEVICE_TABLE(x86cpu, cpu_ids);
-
-static int __init amd_energy_init(void)
-{
-	int ret;
-
-	if (!x86_match_cpu(cpu_ids))
-		return -ENODEV;
-
-	ret = platform_driver_register(&amd_energy_driver);
-	if (ret)
-		return ret;
-
-	amd_energy_platdev = platform_device_alloc(DRVNAME, 0);
-	if (!amd_energy_platdev) {
-		platform_driver_unregister(&amd_energy_driver);
-		return -ENOMEM;
-	}
-
-	ret = platform_device_add(amd_energy_platdev);
-	if (ret) {
-		platform_device_put(amd_energy_platdev);
-		platform_driver_unregister(&amd_energy_driver);
-		return ret;
-	}
-
-	return ret;
-}
-
-static void __exit amd_energy_exit(void)
-{
-	platform_device_unregister(amd_energy_platdev);
-	platform_driver_unregister(&amd_energy_driver);
-}
-
-module_init(amd_energy_init);
-module_exit(amd_energy_exit);
-
-MODULE_DESCRIPTION("Driver for AMD Energy reporting from RAPL MSR via HWMON interface");
-MODULE_AUTHOR("Naveen Krishna Chatradhi <nchatrad@amd.com>");
-MODULE_LICENSE("GPL");
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -741,7 +741,7 @@ static void applesmc_idev_poll(struct input_dev *idev)
 static ssize_t applesmc_name_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "applesmc\n");
+	return sysfs_emit(buf, "applesmc\n");
 }

 static ssize_t applesmc_position_show(struct device *dev,
@@ -763,8 +763,8 @@ static ssize_t applesmc_position_show(struct device *dev,
 out:
 	if (ret)
 		return ret;
-	else
-		return snprintf(buf, PAGE_SIZE, "(%d,%d,%d)\n", x, y, z);
+
+	return sysfs_emit(buf, "(%d,%d,%d)\n", x, y, z);
 }

 static ssize_t applesmc_light_show(struct device *dev,
@@ -804,8 +804,8 @@ static ssize_t applesmc_light_show(struct device *dev,
 out:
 	if (ret)
 		return ret;
-	else
-		return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", left, right);
+
+	return sysfs_emit(sysfsbuf, "(%d,%d)\n", left, right);
 }

 /* Displays sensor key as label */
@@ -814,7 +814,7 @@ static ssize_t applesmc_show_sensor_label(struct device *dev,
 {
 	const char *key = smcreg.index[to_index(devattr)];

-	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", key);
+	return sysfs_emit(sysfsbuf, "%s\n", key);
 }

 /* Displays degree Celsius * 1000 */
@@ -832,7 +832,7 @@ static ssize_t applesmc_show_temperature(struct device *dev,

 	temp = 250 * (value >> 6);

-	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", temp);
+	return sysfs_emit(sysfsbuf, "%d\n", temp);
 }

 static ssize_t applesmc_show_fan_speed(struct device *dev,
@@ -851,7 +851,7 @@ static ssize_t applesmc_show_fan_speed(struct device *dev,
 		return ret;

 	speed = ((buffer[0] << 8 | buffer[1]) >> 2);
-	return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", speed);
+	return sysfs_emit(sysfsbuf, "%u\n", speed);
 }

 static ssize_t applesmc_store_fan_speed(struct device *dev,
@@ -891,7 +891,7 @@ static ssize_t applesmc_show_fan_manual(struct device *dev,
 		return ret;

 	manual = ((buffer[0] << 8 | buffer[1]) >> to_index(attr)) & 0x01;
-	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", manual);
+	return sysfs_emit(sysfsbuf, "%d\n", manual);
 }

 static ssize_t applesmc_store_fan_manual(struct device *dev,
@@ -943,14 +943,14 @@ static ssize_t applesmc_show_fan_position(struct device *dev,

 	if (ret)
 		return ret;
-	else
-		return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", buffer+4);
+
+	return sysfs_emit(sysfsbuf, "%s\n", buffer + 4);
 }

 static ssize_t applesmc_calibrate_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	return snprintf(sysfsbuf, PAGE_SIZE, "(%d,%d)\n", rest_x, rest_y);
+	return sysfs_emit(sysfsbuf, "(%d,%d)\n", rest_x, rest_y);
 }

 static ssize_t applesmc_calibrate_store(struct device *dev,
@@ -992,7 +992,7 @@ static ssize_t applesmc_key_count_show(struct device *dev,

 	count = ((u32)buffer[0]<<24) + ((u32)buffer[1]<<16) +
 						((u32)buffer[2]<<8) + buffer[3];
-	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", count);
+	return sysfs_emit(sysfsbuf, "%d\n", count);
 }

 static ssize_t applesmc_key_at_index_read_show(struct device *dev,
@@ -1020,7 +1020,7 @@ static ssize_t applesmc_key_at_index_data_length_show(struct device *dev,
 	if (IS_ERR(entry))
 		return PTR_ERR(entry);

-	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", entry->len);
+	return sysfs_emit(sysfsbuf, "%d\n", entry->len);
 }

 static ssize_t applesmc_key_at_index_type_show(struct device *dev,
@@ -1032,7 +1032,7 @@ static ssize_t applesmc_key_at_index_type_show(struct device *dev,
 	if (IS_ERR(entry))
 		return PTR_ERR(entry);

-	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->type);
+	return sysfs_emit(sysfsbuf, "%s\n", entry->type);
 }

 static ssize_t applesmc_key_at_index_name_show(struct device *dev,
@@ -1044,13 +1044,13 @@ static ssize_t applesmc_key_at_index_name_show(struct device *dev,
 	if (IS_ERR(entry))
 		return PTR_ERR(entry);

-	return snprintf(sysfsbuf, PAGE_SIZE, "%s\n", entry->key);
+	return sysfs_emit(sysfsbuf, "%s\n", entry->key);
 }

 static ssize_t applesmc_key_at_index_show(struct device *dev,
 				struct device_attribute *attr, char *sysfsbuf)
 {
-	return snprintf(sysfsbuf, PAGE_SIZE, "%d\n", key_at_index);
+	return sysfs_emit(sysfsbuf, "%d\n", key_at_index);
 }

 static ssize_t applesmc_key_at_index_store(struct device *dev,

--- a/drivers/hwmon/corsair-psu.c
+++ b/drivers/hwmon/corsair-psu.c
--- a/drivers/hwmon/dell-smm-hwmon.c
+++ b/drivers/hwmon/dell-smm-hwmon.c
@@ -1210,6 +1210,14 @@ static struct dmi_system_id i8k_whitelist_fan_control[] __initdata = {
 		},
 		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
 	},
+	{
+		.ident = "Dell Latitude E7440",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude E7440"),
+		},
+		.driver_data = (void *)&i8k_fan_control_data[I8K_FAN_34A3_35A3],
+	},
 	{ }
 };


--- a/drivers/hwmon/ds1621.c
+++ b/drivers/hwmon/ds1621.c
@@ -326,7 +326,7 @@ static struct attribute *ds1621_attributes[] = {
 static umode_t ds1621_attribute_visible(struct kobject *kobj,
 					struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct ds1621_data *data = dev_get_drvdata(dev);

 	if (attr == &dev_attr_update_interval.attr)

--- a/drivers/hwmon/ftsteutates.c
+++ b/drivers/hwmon/ftsteutates.c
@@ -509,7 +509,7 @@ fan_alarm_store(struct device *dev, struct device_attribute *devattr,
 /* SysFS structs							     */
 /*****************************************************************************/

-/* Temprature sensors */
+/* Temperature sensors */
 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_value, 0);
 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_value, 1);
 static SENSOR_DEVICE_ATTR_RO(temp3_input, temp_value, 2);
@@ -713,7 +713,7 @@ static int fts_detect(struct i2c_client *client,
 {
 	int val;

-	/* detection works with revsion greater or equal to 0x2b */
+	/* detection works with revision greater or equal to 0x2b */
 	val = i2c_smbus_read_byte_data(client, FTS_DEVICE_REVISION_REG);
 	if (val < 0x2b)
 		return -ENODEV;

--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -79,7 +79,7 @@ static struct attribute *hwmon_dev_attrs[] = {
 static umode_t hwmon_dev_name_is_visible(struct kobject *kobj,
 					 struct attribute *attr, int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);

 	if (to_hwmon_device(dev)->name == NULL)
 		return 0;

--- a/drivers/hwmon/ina209.c
+++ b/drivers/hwmon/ina209.c
@@ -259,7 +259,7 @@ static ssize_t ina209_interval_show(struct device *dev,
 {
 	struct ina209_data *data = dev_get_drvdata(dev);

-	return snprintf(buf, PAGE_SIZE, "%d\n", data->update_interval);
+	return sysfs_emit(buf, "%d\n", data->update_interval);
 }

 /*
@@ -343,7 +343,7 @@ static ssize_t ina209_value_show(struct device *dev,
 		return PTR_ERR(data);

 	val = ina209_from_reg(attr->index, data->regs[attr->index]);
-	return snprintf(buf, PAGE_SIZE, "%ld\n", val);
+	return sysfs_emit(buf, "%ld\n", val);
 }

 static ssize_t ina209_alarm_show(struct device *dev,
@@ -363,7 +363,7 @@ static ssize_t ina209_alarm_show(struct device *dev,
 	 * All alarms are in the INA209_STATUS register. To avoid a long
 	 * switch statement, the mask is passed in attr->index
 	 */
-	return snprintf(buf, PAGE_SIZE, "%u\n", !!(status & mask));
+	return sysfs_emit(buf, "%u\n", !!(status & mask));
 }

 /* Shunt voltage, history, limits, alarms */

--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -310,8 +310,7 @@ static ssize_t ina2xx_value_show(struct device *dev,
 	if (err < 0)
 		return err;

-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ina2xx_get_value(data, attr->index, regval));
+	return sysfs_emit(buf, "%d\n", ina2xx_get_value(data, attr->index, regval));
 }

 static int ina226_reg_to_alert(struct ina2xx_data *data, u8 bit, u16 regval)
@@ -386,7 +385,7 @@ static ssize_t ina226_alert_show(struct device *dev,
 		val = ina226_reg_to_alert(data, attr->index, regval);
 	}

-	ret = snprintf(buf, PAGE_SIZE, "%d\n", val);
+	ret = sysfs_emit(buf, "%d\n", val);
 abort:
 	mutex_unlock(&data->config_lock);
 	return ret;
@@ -450,7 +449,7 @@ static ssize_t ina226_alarm_show(struct device *dev,

 	alarm = (regval & BIT(attr->index)) &&
 		(regval & INA226_ALERT_FUNCTION_FLAG);
-	return snprintf(buf, PAGE_SIZE, "%d\n", alarm);
+	return sysfs_emit(buf, "%d\n", alarm);
 }

 /*
@@ -481,7 +480,7 @@ static ssize_t ina2xx_shunt_show(struct device *dev,
 {
 	struct ina2xx_data *data = dev_get_drvdata(dev);

-	return snprintf(buf, PAGE_SIZE, "%li\n", data->rshunt);
+	return sysfs_emit(buf, "%li\n", data->rshunt);
 }

 static ssize_t ina2xx_shunt_store(struct device *dev,
@@ -537,7 +536,7 @@ static ssize_t ina226_interval_show(struct device *dev,
 	if (status)
 		return status;

-	return snprintf(buf, PAGE_SIZE, "%d\n", ina226_reg_to_interval(regval));
+	return sysfs_emit(buf, "%d\n", ina226_reg_to_interval(regval));
 }

 /* shunt voltage */

--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -698,7 +698,7 @@ static ssize_t ina3221_shunt_show(struct device *dev,
 	unsigned int channel = sd_attr->index;
 	struct ina3221_input *input = &ina->inputs[channel];

-	return snprintf(buf, PAGE_SIZE, "%d\n", input->shunt_resistor);
+	return sysfs_emit(buf, "%d\n", input->shunt_resistor);
 }

 static ssize_t ina3221_shunt_store(struct device *dev,

--- a/drivers/hwmon/intel-m10-bmc-hwmon.c
+++ b/drivers/hwmon/intel-m10-bmc-hwmon.c
@@ -99,6 +99,50 @@ static const struct hwmon_channel_info *n3000bmc_hinfo[] = {
 	NULL
 };

+static const struct m10bmc_sdata d5005bmc_temp_tbl[] = {
+	{ 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Inlet Air Temperature" },
+	{ 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Core Temperature" },
+	{ 0x11c, 0x120, 0x124, 0x128, 0x0, 500, "Board Exhaust Air Temperature" },
+	{ 0x12c, 0x130, 0x134, 0x0, 0x0, 500, "FPGA Transceiver Temperature" },
+	{ 0x138, 0x13c, 0x140, 0x144, 0x0, 500, "RDIMM0 Temperature" },
+	{ 0x148, 0x14c, 0x150, 0x154, 0x0, 500, "RDIMM1 Temperature" },
+	{ 0x158, 0x15c, 0x160, 0x164, 0x0, 500, "RDIMM2 Temperature" },
+	{ 0x168, 0x16c, 0x170, 0x174, 0x0, 500, "RDIMM3 Temperature" },
+	{ 0x178, 0x17c, 0x180, 0x0, 0x0, 500, "QSFP0 Temperature" },
+	{ 0x188, 0x18c, 0x190, 0x0, 0x0, 500, "QSFP1 Temperature" },
+	{ 0x1a0, 0x1a4, 0x1a8, 0x0, 0x0, 500, "3.3v Temperature" },
+	{ 0x1bc, 0x1c0, 0x1c4, 0x0, 0x0, 500, "VCCERAM Temperature" },
+	{ 0x1d8, 0x1dc, 0x1e0, 0x0, 0x0, 500, "VCCR Temperature" },
+	{ 0x1f4, 0x1f8, 0x1fc, 0x0, 0x0, 500, "VCCT Temperature" },
+	{ 0x210, 0x214, 0x218, 0x0, 0x0, 500, "1.8v Temperature" },
+	{ 0x22c, 0x230, 0x234, 0x0, 0x0, 500, "12v Backplane Temperature" },
+	{ 0x248, 0x24c, 0x250, 0x0, 0x0, 500, "12v AUX Temperature" },
+};
+
+static const struct m10bmc_sdata d5005bmc_in_tbl[] = {
+	{ 0x184, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" },
+	{ 0x194, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" },
+	{ 0x198, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Voltage" },
+	{ 0x1ac, 0x1b0, 0x1b4, 0x0, 0x0, 1, "3.3v Voltage" },
+	{ 0x1c8, 0x1cc, 0x1d0, 0x0, 0x0, 1, "VCCERAM Voltage" },
+	{ 0x1e4, 0x1e8, 0x1ec, 0x0, 0x0, 1, "VCCR Voltage" },
+	{ 0x200, 0x204, 0x208, 0x0, 0x0, 1, "VCCT Voltage" },
+	{ 0x21c, 0x220, 0x224, 0x0, 0x0, 1, "1.8v Voltage" },
+	{ 0x238, 0x0, 0x0, 0x0, 0x23c, 1, "12v Backplane Voltage" },
+	{ 0x254, 0x0, 0x0, 0x0, 0x258, 1, "12v AUX Voltage" },
+};
+
+static const struct m10bmc_sdata d5005bmc_curr_tbl[] = {
+	{ 0x19c, 0x0, 0x0, 0x0, 0x0, 1, "FPGA Core Current" },
+	{ 0x1b8, 0x0, 0x0, 0x0, 0x0, 1, "3.3v Current" },
+	{ 0x1d4, 0x0, 0x0, 0x0, 0x0, 1, "VCCERAM Current" },
+	{ 0x1f0, 0x0, 0x0, 0x0, 0x0, 1, "VCCR Current" },
+	{ 0x20c, 0x0, 0x0, 0x0, 0x0, 1, "VCCT Current" },
+	{ 0x228, 0x0, 0x0, 0x0, 0x0, 1, "1.8v Current" },
+	{ 0x240, 0x244, 0x0, 0x0, 0x0, 1, "12v Backplane Current" },
+	{ 0x25c, 0x260, 0x0, 0x0, 0x0, 1, "12v AUX Current" },
+};
+
 static const struct m10bmc_hwmon_board_data n3000bmc_hwmon_bdata = {
 	.tables = {
 		[hwmon_temp] = n3000bmc_temp_tbl,
@@ -110,6 +154,80 @@ static const struct m10bmc_hwmon_board_data n3000bmc_hwmon_bdata = {
 	.hinfo = n3000bmc_hinfo,
 };

+static const struct hwmon_channel_info *d5005bmc_hinfo[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_MAX_HYST |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
+			   HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MAX | HWMON_I_CRIT |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_MIN | HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_MAX | HWMON_C_LABEL),
+	NULL
+};
+
+static const struct m10bmc_hwmon_board_data d5005bmc_hwmon_bdata = {
+	.tables = {
+		[hwmon_temp] = d5005bmc_temp_tbl,
+		[hwmon_in] = d5005bmc_in_tbl,
+		[hwmon_curr] = d5005bmc_curr_tbl,
+	},
+
+	.hinfo = d5005bmc_hinfo,
+};
+
 static umode_t
 m10bmc_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
 			u32 attr, int channel)
@@ -316,6 +434,10 @@ static const struct platform_device_id intel_m10bmc_hwmon_ids[] = {
 		.name = "n3000bmc-hwmon",
 		.driver_data = (unsigned long)&n3000bmc_hwmon_bdata,
 	},
+	{
+		.name = "d5005bmc-hwmon",
+		.driver_data = (unsigned long)&d5005bmc_hwmon_bdata,
+	},
 	{ }
 };


--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1981,7 +1981,7 @@ static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_label, NULL, 3);
 static umode_t it87_in_is_visible(struct kobject *kobj,
 				  struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);
 	int i = index / 5;	/* voltage index */
 	int a = index % 5;	/* attribute index */
@@ -2065,7 +2065,7 @@ static const struct attribute_group it87_group_in = {
 static umode_t it87_temp_is_visible(struct kobject *kobj,
 				    struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);
 	int i = index / 7;	/* temperature index */
 	int a = index % 7;	/* attribute index */
@@ -2126,7 +2126,7 @@ static const struct attribute_group it87_group_temp = {
 static umode_t it87_is_visible(struct kobject *kobj,
 			       struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);

 	if ((index == 2 || index == 3) && !data->has_vid)
@@ -2158,7 +2158,7 @@ static const struct attribute_group it87_group = {
 static umode_t it87_fan_is_visible(struct kobject *kobj,
 				   struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);
 	int i = index / 5;	/* fan index */
 	int a = index % 5;	/* attribute index */
@@ -2229,7 +2229,7 @@ static const struct attribute_group it87_group_fan = {
 static umode_t it87_pwm_is_visible(struct kobject *kobj,
 				   struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);
 	int i = index / 4;	/* pwm index */
 	int a = index % 4;	/* attribute index */
@@ -2290,7 +2290,7 @@ static const struct attribute_group it87_group_pwm = {
 static umode_t it87_auto_pwm_is_visible(struct kobject *kobj,
 					struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct it87_data *data = dev_get_drvdata(dev);
 	int i = index / 11;	/* pwm index */
 	int a = index % 11;	/* attribute index */

--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -280,7 +280,7 @@ static ssize_t pem_bool_show(struct device *dev, struct device_attribute *da,
 		return PTR_ERR(data);

 	status = data->data_string[attr->nr] & attr->index;
-	return snprintf(buf, PAGE_SIZE, "%d\n", !!status);
+	return sysfs_emit(buf, "%d\n", !!status);
 }

 static ssize_t pem_data_show(struct device *dev, struct device_attribute *da,
@@ -296,7 +296,7 @@ static ssize_t pem_data_show(struct device *dev, struct device_attribute *da,
 	value = pem_get_data(data->data_string, sizeof(data->data_string),
 			     attr->index);

-	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+	return sysfs_emit(buf, "%ld\n", value);
 }

 static ssize_t pem_input_show(struct device *dev, struct device_attribute *da,
@@ -312,7 +312,7 @@ static ssize_t pem_input_show(struct device *dev, struct device_attribute *da,
 	value = pem_get_input(data->input_string, sizeof(data->input_string),
 			      attr->index);

-	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+	return sysfs_emit(buf, "%ld\n", value);
 }

 static ssize_t pem_fan_show(struct device *dev, struct device_attribute *da,
@@ -328,7 +328,7 @@ static ssize_t pem_fan_show(struct device *dev, struct device_attribute *da,
 	value = pem_get_fan(data->fan_speed, sizeof(data->fan_speed),
 			    attr->index);

-	return snprintf(buf, PAGE_SIZE, "%ld\n", value);
+	return sysfs_emit(buf, "%ld\n", value);
 }

 /* Voltages */

--- a/drivers/hwmon/lm63.c
+++ b/drivers/hwmon/lm63.c
@@ -931,7 +931,7 @@ static const struct attribute_group lm63_group_extra_lut = {
 static umode_t lm63_attribute_mode(struct kobject *kobj,
 				   struct attribute *attr, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct lm63_data *data = dev_get_drvdata(dev);

 	if (attr == &sensor_dev_attr_temp2_crit.dev_attr.attr

--- a/drivers/hwmon/ltc2945.c
+++ b/drivers/hwmon/ltc2945.c
@@ -226,7 +226,7 @@ static ssize_t ltc2945_value_show(struct device *dev,
 	value = ltc2945_reg_to_val(dev, attr->index);
 	if (value < 0)
 		return value;
-	return snprintf(buf, PAGE_SIZE, "%lld\n", value);
+	return sysfs_emit(buf, "%lld\n", value);
 }

 static ssize_t ltc2945_value_store(struct device *dev,
@@ -333,7 +333,7 @@ static ssize_t ltc2945_bool_show(struct device *dev,
 	if (fault)		/* Clear reported faults in chip register */
 		regmap_update_bits(regmap, LTC2945_FAULT, attr->index, 0);

-	return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+	return sysfs_emit(buf, "%d\n", !!fault);
 }

 /* Input voltages */

--- a/drivers/hwmon/ltc2990.c
+++ b/drivers/hwmon/ltc2990.c
@@ -147,13 +147,13 @@ static ssize_t ltc2990_value_show(struct device *dev,
 	if (unlikely(ret < 0))
 		return ret;

-	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+	return sysfs_emit(buf, "%d\n", value);
 }

 static umode_t ltc2990_attrs_visible(struct kobject *kobj,
 				     struct attribute *a, int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct ltc2990_data *data = dev_get_drvdata(dev);
 	struct device_attribute *da =
 			container_of(a, struct device_attribute, attr);

--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -128,7 +128,7 @@ static ssize_t ltc4151_value_show(struct device *dev,
 		return PTR_ERR(data);

 	value = ltc4151_get_value(data, attr->index);
-	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+	return sysfs_emit(buf, "%d\n", value);
 }

 /*

--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -139,7 +139,7 @@ static ssize_t ltc4215_voltage_show(struct device *dev,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	const int voltage = ltc4215_get_voltage(dev, attr->index);

-	return snprintf(buf, PAGE_SIZE, "%d\n", voltage);
+	return sysfs_emit(buf, "%d\n", voltage);
 }

 static ssize_t ltc4215_current_show(struct device *dev,
@@ -147,7 +147,7 @@ static ssize_t ltc4215_current_show(struct device *dev,
 {
 	const unsigned int curr = ltc4215_get_current(dev);

-	return snprintf(buf, PAGE_SIZE, "%u\n", curr);
+	return sysfs_emit(buf, "%u\n", curr);
 }

 static ssize_t ltc4215_power_show(struct device *dev,
@@ -159,7 +159,7 @@ static ssize_t ltc4215_power_show(struct device *dev,
 	/* current in mA * voltage in mV == power in uW */
 	const unsigned int power = abs(output_voltage * curr);

-	return snprintf(buf, PAGE_SIZE, "%u\n", power);
+	return sysfs_emit(buf, "%u\n", power);
 }

 static ssize_t ltc4215_alarm_show(struct device *dev,
@@ -170,7 +170,7 @@ static ssize_t ltc4215_alarm_show(struct device *dev,
 	const u8 reg = data->regs[LTC4215_STATUS];
 	const u32 mask = attr->index;

-	return snprintf(buf, PAGE_SIZE, "%u\n", !!(reg & mask));
+	return sysfs_emit(buf, "%u\n", !!(reg & mask));
 }

 /*

--- a/drivers/hwmon/ltc4222.c
+++ b/drivers/hwmon/ltc4222.c
@@ -94,7 +94,7 @@ static ssize_t ltc4222_value_show(struct device *dev,
 	value = ltc4222_get_value(dev, attr->index);
 	if (value < 0)
 		return value;
-	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+	return sysfs_emit(buf, "%d\n", value);
 }

 static ssize_t ltc4222_bool_show(struct device *dev,
@@ -112,7 +112,7 @@ static ssize_t ltc4222_bool_show(struct device *dev,
 	if (fault)		/* Clear reported faults in chip register */
 		regmap_update_bits(regmap, attr->nr, attr->index, 0);

-	return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+	return sysfs_emit(buf, "%d\n", !!fault);
 }

 /* Voltages */

--- a/drivers/hwmon/ltc4260.c
+++ b/drivers/hwmon/ltc4260.c
@@ -79,7 +79,7 @@ static ssize_t ltc4260_value_show(struct device *dev,
 	value = ltc4260_get_value(dev, attr->index);
 	if (value < 0)
 		return value;
-	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+	return sysfs_emit(buf, "%d\n", value);
 }

 static ssize_t ltc4260_bool_show(struct device *dev,
@@ -98,7 +98,7 @@ static ssize_t ltc4260_bool_show(struct device *dev,
 	if (fault)		/* Clear reported faults in chip register */
 		regmap_update_bits(regmap, LTC4260_FAULT, attr->index, 0);

-	return snprintf(buf, PAGE_SIZE, "%d\n", !!fault);
+	return sysfs_emit(buf, "%d\n", !!fault);
 }

 /* Voltages */

--- a/drivers/hwmon/ltc4261.c
+++ b/drivers/hwmon/ltc4261.c
@@ -130,7 +130,7 @@ static ssize_t ltc4261_value_show(struct device *dev,
 		return PTR_ERR(data);

 	value = ltc4261_get_value(data, attr->index);
-	return snprintf(buf, PAGE_SIZE, "%d\n", value);
+	return sysfs_emit(buf, "%d\n", value);
 }

 static ssize_t ltc4261_bool_show(struct device *dev,
@@ -147,7 +147,7 @@ static ssize_t ltc4261_bool_show(struct device *dev,
 	if (fault)		/* Clear reported faults in chip register */
 		i2c_smbus_write_byte_data(data->client, LTC4261_FAULT, ~fault);

-	return snprintf(buf, PAGE_SIZE, "%d\n", fault ? 1 : 0);
+	return sysfs_emit(buf, "%d\n", fault ? 1 : 0);
 }

 /*

--- a/drivers/hwmon/max16065.c
+++ b/drivers/hwmon/max16065.c
@@ -187,7 +187,7 @@ static ssize_t max16065_alarm_show(struct device *dev,
 		i2c_smbus_write_byte_data(data->client,
 					  MAX16065_FAULT(attr2->nr), val);

-	return snprintf(buf, PAGE_SIZE, "%d\n", !!val);
+	return sysfs_emit(buf, "%d\n", !!val);
 }

 static ssize_t max16065_input_show(struct device *dev,
@@ -200,8 +200,8 @@ static ssize_t max16065_input_show(struct device *dev,
 	if (unlikely(adc < 0))
 		return adc;

-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ADC_TO_MV(adc, data->range[attr->index]));
+	return sysfs_emit(buf, "%d\n",
+			  ADC_TO_MV(adc, data->range[attr->index]));
 }

 static ssize_t max16065_current_show(struct device *dev,
@@ -212,8 +212,8 @@ static ssize_t max16065_current_show(struct device *dev,
 	if (unlikely(data->curr_sense < 0))
 		return data->curr_sense;

-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			ADC_TO_CURR(data->curr_sense, data->curr_gain));
+	return sysfs_emit(buf, "%d\n",
+			  ADC_TO_CURR(data->curr_sense, data->curr_gain));
 }

 static ssize_t max16065_limit_store(struct device *dev,
@@ -249,8 +249,8 @@ static ssize_t max16065_limit_show(struct device *dev,
 	struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(da);
 	struct max16065_data *data = dev_get_drvdata(dev);

-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			data->limit[attr2->nr][attr2->index]);
+	return sysfs_emit(buf, "%d\n",
+			  data->limit[attr2->nr][attr2->index]);
 }

 /* Construct a sensor_device_attribute structure for each register */
@@ -454,7 +454,7 @@ static struct attribute *max16065_max_attributes[] = {
 static umode_t max16065_basic_is_visible(struct kobject *kobj,
 					 struct attribute *a, int n)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct max16065_data *data = dev_get_drvdata(dev);
 	int index = n / 4;

@@ -466,7 +466,7 @@ static umode_t max16065_basic_is_visible(struct kobject *kobj,
 static umode_t max16065_secondary_is_visible(struct kobject *kobj,
 					     struct attribute *a, int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct max16065_data *data = dev_get_drvdata(dev);

 	if (index >= data->num_adc)

--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -460,7 +460,7 @@ static DEVICE_ATTR(dummy, 0, NULL, NULL);
 static umode_t max6697_is_visible(struct kobject *kobj, struct attribute *attr,
 				  int index)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct max6697_data *data = dev_get_drvdata(dev);
 	const struct max6697_chip_data *chip = data->chip;
 	int channel = index / 7;	/* channel number */

--- a/drivers/hwmon/mlxreg-fan.c
+++ b/drivers/hwmon/mlxreg-fan.c
@@ -67,11 +67,13 @@
 * @connected: indicates if tachometer is connected;
 * @reg: register offset;
 * @mask: fault mask;
+ * @prsnt: present register offset;
 */
 struct mlxreg_fan_tacho {
 	bool connected;
 	u32 reg;
 	u32 mask;
+	u32 prsnt;
 };

 /*
@@ -92,6 +94,7 @@ struct mlxreg_fan_pwm {
 * @regmap: register map of parent device;
 * @tacho: tachometer data;
 * @pwm: PWM data;
+ * @tachos_per_drwr - number of tachometers per drawer;
 * @samples: minimum allowed samples per pulse;
 * @divider: divider value for tachometer RPM calculation;
 * @cooling: cooling device levels;
@@ -103,6 +106,7 @@ struct mlxreg_fan {
 	struct mlxreg_core_platform_data *pdata;
 	struct mlxreg_fan_tacho tacho[MLXREG_FAN_MAX_TACHO];
 	struct mlxreg_fan_pwm pwm;
+	int tachos_per_drwr;
 	int samples;
 	int divider;
 	u8 cooling_levels[MLXREG_FAN_MAX_STATE + 1];
@@ -123,6 +127,26 @@ mlxreg_fan_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		tacho = &fan->tacho[channel];
 		switch (attr) {
 		case hwmon_fan_input:
+			/*
+			 * Check FAN presence: FAN related bit in presence register is one,
+			 * if FAN is physically connected, zero - otherwise.
+			 */
+			if (tacho->prsnt && fan->tachos_per_drwr) {
+				err = regmap_read(fan->regmap, tacho->prsnt, &regval);
+				if (err)
+					return err;
+
+				/*
+				 * Map channel to presence bit - drawer can be equipped with
+				 * one or few FANs, while presence is indicated per drawer.
+				 */
+				if (BIT(channel / fan->tachos_per_drwr) & regval) {
+					/* FAN is not connected - return zero for FAN speed. */
+					*val = 0;
+					return 0;
+				}
+			}
+
 			err = regmap_read(fan->regmap, tacho->reg, &regval);
 			if (err)
 				return err;
@@ -389,8 +413,8 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan,
 			     struct mlxreg_core_platform_data *pdata)
 {
 	struct mlxreg_core_data *data = pdata->data;
+	int tacho_num = 0, tacho_avail = 0, i;
 	bool configured = false;
-	int tacho_num = 0, i;
 	int err;

 	fan->samples = MLXREG_FAN_TACHO_SAMPLES_PER_PULSE_DEF;
@@ -415,7 +439,9 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan,

 			fan->tacho[tacho_num].reg = data->reg;
 			fan->tacho[tacho_num].mask = data->mask;
+			fan->tacho[tacho_num].prsnt = data->reg_prsnt;
 			fan->tacho[tacho_num++].connected = true;
+			tacho_avail++;
 		} else if (strnstr(data->label, "pwm", sizeof(data->label))) {
 			if (fan->pwm.connected) {
 				dev_err(fan->dev, "duplicate pwm entry: %s\n",
@@ -453,6 +479,29 @@ static int mlxreg_fan_config(struct mlxreg_fan *fan,
 		}
 	}

+	if (pdata->capability) {
+		int drwr_avail;
+		u32 regval;
+
+		/* Obtain the number of FAN drawers, supported by system. */
+		err = regmap_read(fan->regmap, pdata->capability, &regval);
+		if (err) {
+			dev_err(fan->dev, "Failed to query capability register 0x%08x\n",
+				pdata->capability);
+			return err;
+		}
+
+		drwr_avail = hweight32(regval);
+		if (!tacho_avail || !drwr_avail || tacho_avail < drwr_avail) {
+			dev_err(fan->dev, "Configuration is invalid: drawers num %d tachos num %d\n",
+				drwr_avail, tacho_avail);
+			return -EINVAL;
+		}
+
+		/* Set the number of tachometers per one drawer. */
+		fan->tachos_per_drwr = tacho_avail / drwr_avail;
+	}
+
 	/* Init cooling levels per PWM state. */
 	for (i = 0; i < MLXREG_FAN_SPEED_MIN_LEVEL; i++)
 		fan->cooling_levels[i] = MLXREG_FAN_SPEED_MIN_LEVEL;

--- a/drivers/hwmon/nct6683.c
+++ b/drivers/hwmon/nct6683.c
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * nct6683 - Driver for the hardware monitoring functionality of
- *	     Nuvoton NCT6683D/NCT6687D eSIO
+ *	     Nuvoton NCT6683D/NCT6686D/NCT6687D eSIO
 *
 * Copyright (C) 2013  Guenter Roeck <linux@roeck-us.net>
 *
@@ -12,6 +12,7 @@
 *
 * Chip        #vin    #fan    #pwm    #temp  chip ID
 * nct6683d     21(1)   16      8       32(1) 0xc730
+ * nct6686d     21(1)   16      8       32(1) 0xd440
 * nct6687d     21(1)   16      8       32(1) 0xd590
 *
 * Notes:
@@ -33,7 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>

-enum kinds { nct6683, nct6687 };
+enum kinds { nct6683, nct6686, nct6687 };

 static bool force;
 module_param(force, bool, 0);
@@ -41,11 +42,13 @@ MODULE_PARM_DESC(force, "Set to one to enable support for unknown vendors");

 static const char * const nct6683_device_names[] = {
 	"nct6683",
+	"nct6686",
 	"nct6687",
 };

 static const char * const nct6683_chip_names[] = {
 	"NCT6683D",
+	"NCT6686D",
 	"NCT6687D",
 };

@@ -66,6 +69,7 @@ static const char * const nct6683_chip_names[] = {

 #define SIO_NCT6681_ID		0xb270	/* for later */
 #define SIO_NCT6683_ID		0xc730
+#define SIO_NCT6686_ID		0xd440
 #define SIO_NCT6687_ID		0xd590
 #define SIO_ID_MASK		0xFFF0

@@ -488,17 +492,6 @@ static inline long in_from_reg(u16 reg, u8 src)
 	return reg * scale;
 }

-static inline u16 in_to_reg(u32 val, u8 src)
-{
-	int scale = 16;
-
-	if (src == MON_SRC_VCC || src == MON_SRC_VSB || src == MON_SRC_AVSB ||
-	    src == MON_SRC_VBAT)
-		scale <<= 1;
-
-	return clamp_val(DIV_ROUND_CLOSEST(val, scale), 0, 127);
-}
-
 static u16 nct6683_read(struct nct6683_data *data, u16 reg)
 {
 	int res;
@@ -1362,6 +1355,9 @@ static int __init nct6683_find(int sioaddr, struct nct6683_sio_data *sio_data)
 	case SIO_NCT6683_ID:
 		sio_data->kind = nct6683;
 		break;
+	case SIO_NCT6686_ID:
+		sio_data->kind = nct6686;
+		break;
 	case SIO_NCT6687_ID:
 		sio_data->kind = nct6687;
 		break;

--- a/drivers/hwmon/nzxt-kraken2.c
+++ b/drivers/hwmon/nzxt-kraken2.c
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * nzxt-kraken2.c - hwmon driver for NZXT Kraken X42/X52/X62/X72 coolers
+ *
+ * The device asynchronously sends HID reports (with id 0x04) twice a second to
+ * communicate current fan speed, pump speed and coolant temperature.  The
+ * device does not respond to Get_Report requests for this status report.
+ *
+ * Copyright 2019-2021  Jonas Malaco <jonas@protocubo.io>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/hid.h>
+#include <linux/hwmon.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+
+#define STATUS_REPORT_ID	0x04
+#define STATUS_VALIDITY		2 /* seconds; equivalent to 4 missed updates */
+
+static const char *const kraken2_temp_label[] = {
+	"Coolant",
+};
+
+static const char *const kraken2_fan_label[] = {
+	"Fan",
+	"Pump",
+};
+
+struct kraken2_priv_data {
+	struct hid_device *hid_dev;
+	struct device *hwmon_dev;
+	s32 temp_input[1];
+	u16 fan_input[2];
+	unsigned long updated; /* jiffies */
+};
+
+static umode_t kraken2_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	return 0444;
+}
+
+static int kraken2_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	struct kraken2_priv_data *priv = dev_get_drvdata(dev);
+
+	if (time_after(jiffies, priv->updated + STATUS_VALIDITY * HZ))
+		return -ENODATA;
+
+	switch (type) {
+	case hwmon_temp:
+		*val = priv->temp_input[channel];
+		break;
+	case hwmon_fan:
+		*val = priv->fan_input[channel];
+		break;
+	default:
+		return -EOPNOTSUPP; /* unreachable */
+	}
+
+	return 0;
+}
+
+static int kraken2_read_string(struct device *dev, enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_temp:
+		*str = kraken2_temp_label[channel];
+		break;
+	case hwmon_fan:
+		*str = kraken2_fan_label[channel];
+		break;
+	default:
+		return -EOPNOTSUPP; /* unreachable */
+	}
+	return 0;
+}
+
+static const struct hwmon_ops kraken2_hwmon_ops = {
+	.is_visible = kraken2_is_visible,
+	.read = kraken2_read,
+	.read_string = kraken2_read_string,
+};
+
+static const struct hwmon_channel_info *kraken2_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(fan,
+			   HWMON_F_INPUT | HWMON_F_LABEL,
+			   HWMON_F_INPUT | HWMON_F_LABEL),
+	NULL
+};
+
+static const struct hwmon_chip_info kraken2_chip_info = {
+	.ops = &kraken2_hwmon_ops,
+	.info = kraken2_info,
+};
+
+static int kraken2_raw_event(struct hid_device *hdev,
+			     struct hid_report *report, u8 *data, int size)
+{
+	struct kraken2_priv_data *priv;
+
+	if (size < 7 || report->id != STATUS_REPORT_ID)
+		return 0;
+
+	priv = hid_get_drvdata(hdev);
+
+	/*
+	 * The fractional byte of the coolant temperature has been observed to
+	 * be in the interval [1,9], but some of these steps are also
+	 * consistently skipped for certain integer parts.
+	 *
+	 * For the lack of a better idea, assume that the resolution is 0.1°C,
+	 * and that the missing steps are artifacts of how the firmware
+	 * processes the raw sensor data.
+	 */
+	priv->temp_input[0] = data[1] * 1000 + data[2] * 100;
+
+	priv->fan_input[0] = get_unaligned_be16(data + 3);
+	priv->fan_input[1] = get_unaligned_be16(data + 5);
+
+	priv->updated = jiffies;
+
+	return 0;
+}
+
+static int kraken2_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	struct kraken2_priv_data *priv;
+	int ret;
+
+	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->hid_dev = hdev;
+	hid_set_drvdata(hdev, priv);
+
+	/*
+	 * Initialize ->updated to STATUS_VALIDITY seconds in the past, making
+	 * the initial empty data invalid for kraken2_read without the need for
+	 * a special case there.
+	 */
+	priv->updated = jiffies - STATUS_VALIDITY * HZ;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parse failed with %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Enable hidraw so existing user-space tools can continue to work.
+	 */
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "hid hw start failed with %d\n", ret);
+		goto fail_and_stop;
+	}
+
+	ret = hid_hw_open(hdev);
+	if (ret) {
+		hid_err(hdev, "hid hw open failed with %d\n", ret);
+		goto fail_and_close;
+	}
+
+	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "kraken2",
+							  priv, &kraken2_chip_info,
+							  NULL);
+	if (IS_ERR(priv->hwmon_dev)) {
+		ret = PTR_ERR(priv->hwmon_dev);
+		hid_err(hdev, "hwmon registration failed with %d\n", ret);
+		goto fail_and_close;
+	}
+
+	return 0;
+
+fail_and_close:
+	hid_hw_close(hdev);
+fail_and_stop:
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void kraken2_remove(struct hid_device *hdev)
+{
+	struct kraken2_priv_data *priv = hid_get_drvdata(hdev);
+
+	hwmon_device_unregister(priv->hwmon_dev);
+
+	hid_hw_close(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id kraken2_table[] = {
+	{ HID_USB_DEVICE(0x1e71, 0x170e) }, /* NZXT Kraken X42/X52/X62/X72 */
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, kraken2_table);
+
+static struct hid_driver kraken2_driver = {
+	.name = "nzxt-kraken2",
+	.id_table = kraken2_table,
+	.probe = kraken2_probe,
+	.remove = kraken2_remove,
+	.raw_event = kraken2_raw_event,
+};
+
+static int __init kraken2_init(void)
+{
+	return hid_register_driver(&kraken2_driver);
+}
+
+static void __exit kraken2_exit(void)
+{
+	hid_unregister_driver(&kraken2_driver);
+}
+
+/*
+ * When compiled into the kernel, initialize after the hid bus.
+ */
+late_initcall(kraken2_init);
+module_exit(kraken2_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonas Malaco <jonas@protocubo.io>");
+MODULE_DESCRIPTION("Hwmon driver for NZXT Kraken X42/X52/X62/X72 coolers");
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -261,7 +261,7 @@ static ssize_t occ_show_temp_1(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }

 static ssize_t occ_show_temp_2(struct device *dev,
@@ -312,7 +312,7 @@ static ssize_t occ_show_temp_2(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }

 static ssize_t occ_show_temp_10(struct device *dev,
@@ -366,7 +366,7 @@ static ssize_t occ_show_temp_10(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }

 static ssize_t occ_show_freq_1(struct device *dev,
@@ -396,7 +396,7 @@ static ssize_t occ_show_freq_1(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }

 static ssize_t occ_show_freq_2(struct device *dev,
@@ -426,7 +426,7 @@ static ssize_t occ_show_freq_2(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%u\n", val);
+	return sysfs_emit(buf, "%u\n", val);
 }

 static ssize_t occ_show_power_1(struct device *dev,
@@ -465,7 +465,7 @@ static ssize_t occ_show_power_1(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val);
+	return sysfs_emit(buf, "%llu\n", val);
 }

 static u64 occ_get_powr_avg(u64 *accum, u32 *samples)
@@ -494,9 +494,9 @@ static ssize_t occ_show_power_2(struct device *dev,

 	switch (sattr->nr) {
 	case 0:
-		return snprintf(buf, PAGE_SIZE - 1, "%u_%u_%u\n",
-				get_unaligned_be32(&power->sensor_id),
-				power->function_id, power->apss_channel);
+		return sysfs_emit(buf, "%u_%u_%u\n",
+				  get_unaligned_be32(&power->sensor_id),
+				  power->function_id, power->apss_channel);
 	case 1:
 		val = occ_get_powr_avg(&power->accumulator,
 				       &power->update_tag);
@@ -512,7 +512,7 @@ static ssize_t occ_show_power_2(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val);
+	return sysfs_emit(buf, "%llu\n", val);
 }

 static ssize_t occ_show_power_a0(struct device *dev,
@@ -533,8 +533,8 @@ static ssize_t occ_show_power_a0(struct device *dev,

 	switch (sattr->nr) {
 	case 0:
-		return snprintf(buf, PAGE_SIZE - 1, "%u_system\n",
-				get_unaligned_be32(&power->sensor_id));
+		return sysfs_emit(buf, "%u_system\n",
+				  get_unaligned_be32(&power->sensor_id));
 	case 1:
 		val = occ_get_powr_avg(&power->system.accumulator,
 				       &power->system.update_tag);
@@ -547,8 +547,8 @@ static ssize_t occ_show_power_a0(struct device *dev,
 		val = get_unaligned_be16(&power->system.value) * 1000000ULL;
 		break;
 	case 4:
-		return snprintf(buf, PAGE_SIZE - 1, "%u_proc\n",
-				get_unaligned_be32(&power->sensor_id));
+		return sysfs_emit(buf, "%u_proc\n",
+				  get_unaligned_be32(&power->sensor_id));
 	case 5:
 		val = occ_get_powr_avg(&power->proc.accumulator,
 				       &power->proc.update_tag);
@@ -561,8 +561,8 @@ static ssize_t occ_show_power_a0(struct device *dev,
 		val = get_unaligned_be16(&power->proc.value) * 1000000ULL;
 		break;
 	case 8:
-		return snprintf(buf, PAGE_SIZE - 1, "%u_vdd\n",
-				get_unaligned_be32(&power->sensor_id));
+		return sysfs_emit(buf, "%u_vdd\n",
+				  get_unaligned_be32(&power->sensor_id));
 	case 9:
 		val = occ_get_powr_avg(&power->vdd.accumulator,
 				       &power->vdd.update_tag);
@@ -575,8 +575,8 @@ static ssize_t occ_show_power_a0(struct device *dev,
 		val = get_unaligned_be16(&power->vdd.value) * 1000000ULL;
 		break;
 	case 12:
-		return snprintf(buf, PAGE_SIZE - 1, "%u_vdn\n",
-				get_unaligned_be32(&power->sensor_id));
+		return sysfs_emit(buf, "%u_vdn\n",
+				  get_unaligned_be32(&power->sensor_id));
 	case 13:
 		val = occ_get_powr_avg(&power->vdn.accumulator,
 				       &power->vdn.update_tag);
@@ -592,7 +592,7 @@ static ssize_t occ_show_power_a0(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val);
+	return sysfs_emit(buf, "%llu\n", val);
 }

 static ssize_t occ_show_caps_1_2(struct device *dev,
@@ -613,7 +613,7 @@ static ssize_t occ_show_caps_1_2(struct device *dev,

 	switch (sattr->nr) {
 	case 0:
-		return snprintf(buf, PAGE_SIZE - 1, "system\n");
+		return sysfs_emit(buf, "system\n");
 	case 1:
 		val = get_unaligned_be16(&caps->cap) * 1000000ULL;
 		break;
@@ -642,7 +642,7 @@ static ssize_t occ_show_caps_1_2(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val);
+	return sysfs_emit(buf, "%llu\n", val);
 }

 static ssize_t occ_show_caps_3(struct device *dev,
@@ -663,7 +663,7 @@ static ssize_t occ_show_caps_3(struct device *dev,

 	switch (sattr->nr) {
 	case 0:
-		return snprintf(buf, PAGE_SIZE - 1, "system\n");
+		return sysfs_emit(buf, "system\n");
 	case 1:
 		val = get_unaligned_be16(&caps->cap) * 1000000ULL;
 		break;
@@ -689,7 +689,7 @@ static ssize_t occ_show_caps_3(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%llu\n", val);
+	return sysfs_emit(buf, "%llu\n", val);
 }

 static ssize_t occ_store_caps_user(struct device *dev,
@@ -732,21 +732,22 @@ static ssize_t occ_show_extended(struct device *dev,

 	switch (sattr->nr) {
 	case 0:
-		if (extn->flags & EXTN_FLAG_SENSOR_ID)
-			rc = snprintf(buf, PAGE_SIZE - 1, "%u",
-				      get_unaligned_be32(&extn->sensor_id));
-		else
-			rc = snprintf(buf, PAGE_SIZE - 1, "%02x%02x%02x%02x\n",
-				      extn->name[0], extn->name[1],
-				      extn->name[2], extn->name[3]);
+		if (extn->flags & EXTN_FLAG_SENSOR_ID) {
+			rc = sysfs_emit(buf, "%u",
+					get_unaligned_be32(&extn->sensor_id));
+		} else {
+			rc = sysfs_emit(buf, "%02x%02x%02x%02x\n",
+					extn->name[0], extn->name[1],
+					extn->name[2], extn->name[3]);
+		}
 		break;
 	case 1:
-		rc = snprintf(buf, PAGE_SIZE - 1, "%02x\n", extn->flags);
+		rc = sysfs_emit(buf, "%02x\n", extn->flags);
 		break;
 	case 2:
-		rc = snprintf(buf, PAGE_SIZE - 1, "%02x%02x%02x%02x%02x%02x\n",
-			      extn->data[0], extn->data[1], extn->data[2],
-			      extn->data[3], extn->data[4], extn->data[5]);
+		rc = sysfs_emit(buf, "%02x%02x%02x%02x%02x%02x\n",
+				extn->data[0], extn->data[1], extn->data[2],
+				extn->data[3], extn->data[4], extn->data[5]);
 		break;
 	default:
 		return -EINVAL;

--- a/drivers/hwmon/occ/sysfs.c
+++ b/drivers/hwmon/occ/sysfs.c
@@ -67,7 +67,7 @@ static ssize_t occ_sysfs_show(struct device *dev,
 		return -EINVAL;
 	}

-	return snprintf(buf, PAGE_SIZE - 1, "%d\n", val);
+	return sysfs_emit(buf, "%d\n", val);
 }

 static ssize_t occ_error_show(struct device *dev,
@@ -77,7 +77,7 @@ static ssize_t occ_error_show(struct device *dev,

 	occ_update_response(occ);

-	return snprintf(buf, PAGE_SIZE - 1, "%d\n", occ->error);
+	return sysfs_emit(buf, "%d\n", occ->error);
 }

 static SENSOR_DEVICE_ATTR(occ_master, 0444, occ_sysfs_show, NULL, 0);

--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -56,6 +56,25 @@ config SENSORS_BEL_PFE
 	  This driver can also be built as a module. If so, the module will
 	  be called bel-pfe.

+config SENSORS_BPA_RS600
+	tristate "BluTek BPA-RS600 Power Supplies"
+	help
+	  If you say yes here you get hardware monitoring support for BluTek
+	  BPA-RS600 Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called bpa-rs600.
+
+config SENSORS_FSP_3Y
+	tristate "FSP/3Y-Power power supplies"
+	help
+	  If you say yes here you get hardware monitoring support for
+	  FSP/3Y-Power hot-swap power supplies.
+	  Supported models: YH-5151E, YM-2151E
+
+	  This driver can also be built as a module. If so, the module will
+	  be called fsp-3y.
+
 config SENSORS_IBM_CFFPS
 	tristate "IBM Common Form Factor Power Supply"
 	depends on LEDS_CLASS
@@ -84,6 +103,15 @@ config SENSORS_IR35221
 	  This driver can also be built as a module. If so, the module will
 	  be called ir35221.

+config SENSORS_IR36021
+	tristate "Infineon IR36021"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  IR36021.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ir36021.
+
 config SENSORS_IR38064
 	tristate "Infineon IR38064"
 	help
@@ -148,6 +176,15 @@ config SENSORS_LTC3815
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc3815.

+config SENSORS_MAX15301
+	tristate "Maxim MAX15301"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX15301, as well as for Flex BMR461.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max15301.
+
 config SENSORS_MAX16064
 	tristate "Maxim MAX16064"
 	help
@@ -247,6 +284,16 @@ config SENSORS_Q54SJ108A2
 	  This driver can also be built as a module. If so, the module will
 	  be called q54sj108a2.

+config SENSORS_STPDDC60
+	tristate "ST STPDDC60"
+	help
+	  If you say yes here you get hardware monitoring support for ST
+	  STPDDC60 Universal Digital Multicell Controller, as well as for
+	  Flex BMR481.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called stpddc60.
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help
@@ -257,10 +304,10 @@ config SENSORS_TPS40422
 	  be called tps40422.

 config SENSORS_TPS53679
-	tristate "TI TPS53647, TPS53667, TPS53679, TPS53681, TPS53688"
+	tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
 	help
 	  If you say yes here you get hardware monitoring support for TI
-	  TPS53647, TPS53667, TPS53679, TPS53681, and TPS53688.
+	  TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.

 	  This driver can also be built as a module. If so, the module will
 	  be called tps53679.

--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -8,15 +8,19 @@ obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
 obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
 obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
 obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
+obj-$(CONFIG_SENSORS_BPA_RS600)	+= bpa-rs600.o
+obj-$(CONFIG_SENSORS_FSP_3Y)	+= fsp-3y.o
 obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
 obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
 obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
+obj-$(CONFIG_SENSORS_IR36021)	+= ir36021.o
 obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
 obj-$(CONFIG_SENSORS_IRPS5401)	+= irps5401.o
 obj-$(CONFIG_SENSORS_ISL68137)	+= isl68137.o
 obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
 obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
 obj-$(CONFIG_SENSORS_LTC3815)	+= ltc3815.o
+obj-$(CONFIG_SENSORS_MAX15301)	+= max15301.o
 obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
 obj-$(CONFIG_SENSORS_MAX16601)	+= max16601.o
 obj-$(CONFIG_SENSORS_MAX20730)	+= max20730.o
@@ -28,6 +32,7 @@ obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
 obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
 obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
+obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o

--- a/drivers/hwmon/pmbus/adm1266.c
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -510,3 +510,4 @@ module_i2c_driver(adm1266_driver);
 MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
 MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -805,3 +805,4 @@ module_i2c_driver(adm1275_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/bel-pfe.c
+++ b/drivers/hwmon/pmbus/bel-pfe.c
@@ -129,3 +129,4 @@ module_i2c_driver(pfe_pmbus_driver);
 MODULE_AUTHOR("Tao Ren <rentao.bupt@gmail.com>");
 MODULE_DESCRIPTION("PMBus driver for BEL PFE Family Power Supplies");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/bpa-rs600.c
+++ b/drivers/hwmon/pmbus/bpa-rs600.c
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for BluTek BPA-RS600 Power Supplies
+ *
+ * Copyright 2021 Allied Telesis Labs
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define BPARS600_MFR_VIN_MIN	0xa0
+#define BPARS600_MFR_VIN_MAX	0xa1
+#define BPARS600_MFR_IIN_MAX	0xa2
+#define BPARS600_MFR_PIN_MAX	0xa3
+#define BPARS600_MFR_VOUT_MIN	0xa4
+#define BPARS600_MFR_VOUT_MAX	0xa5
+#define BPARS600_MFR_IOUT_MAX	0xa6
+#define BPARS600_MFR_POUT_MAX	0xa7
+
+static int bpa_rs600_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_FAN_CONFIG_12:
+		/*
+		 * Two fans are reported in PMBUS_FAN_CONFIG_12 but there is
+		 * only one fan in the module. Mask out the FAN2 bits.
+		 */
+		ret = pmbus_read_byte_data(client, 0, PMBUS_FAN_CONFIG_12);
+		if (ret >= 0)
+			ret &= ~(PB_FAN_2_INSTALLED | PB_FAN_2_PULSE_MASK);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VIN_UV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MIN);
+		break;
+	case PMBUS_VIN_OV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VIN_MAX);
+		break;
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MIN);
+		break;
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_VOUT_MAX);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IIN_MAX);
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_IOUT_MAX);
+		break;
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_PIN_MAX);
+		break;
+	case PMBUS_POUT_OP_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff, BPARS600_MFR_POUT_MAX);
+		break;
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+		/* These commands return data but it is invalid/un-documented */
+		ret = -ENXIO;
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			ret = -ENXIO;
+		else
+			ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static struct pmbus_driver_info bpa_rs600_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_FAN] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_PIN | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+		PMBUS_HAVE_FAN12 |
+		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_STATUS_FAN12,
+	.read_byte_data = bpa_rs600_read_byte_data,
+	.read_word_data = bpa_rs600_read_word_data,
+};
+
+static int bpa_rs600_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_WORD_DATA
+				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+
+	if (strncmp(buf, "BPA-RS600", 8)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, &bpa_rs600_info);
+}
+
+static const struct i2c_device_id bpa_rs600_id[] = {
+	{ "bpars600", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bpa_rs600_id);
+
+static const struct of_device_id __maybe_unused bpa_rs600_of_match[] = {
+	{ .compatible = "blutek,bpa-rs600" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bpa_rs600_of_match);
+
+static struct i2c_driver bpa_rs600_driver = {
+	.driver = {
+		.name = "bpa-rs600",
+		.of_match_table = of_match_ptr(bpa_rs600_of_match),
+	},
+	.probe_new = bpa_rs600_probe,
+	.id_table = bpa_rs600_id,
+};
+
+module_i2c_driver(bpa_rs600_driver);
+
+MODULE_AUTHOR("Chris Packham");
+MODULE_DESCRIPTION("PMBus driver for BluTek BPA-RS600");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/fsp-3y.c
+++ b/drivers/hwmon/pmbus/fsp-3y.c
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for FSP 3Y-Power PSUs
+ *
+ * Copyright (c) 2021 Václav Kubernát, CESNET
+ *
+ * This driver is mostly reverse engineered with the help of a tool called pmbus_peek written by
+ * David Brownell (and later adopted by Jan Kundrát). The device has some sort of a timing issue
+ * when switching pages, details are explained in the code. The driver support is limited. It
+ * exposes only the values, that have been tested to work correctly. Unsupported values either
+ * aren't supported by the devices or their encondings are unknown.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define YM2151_PAGE_12V_LOG	0x00
+#define YM2151_PAGE_12V_REAL	0x00
+#define YM2151_PAGE_5VSB_LOG	0x01
+#define YM2151_PAGE_5VSB_REAL	0x20
+#define YH5151E_PAGE_12V_LOG	0x00
+#define YH5151E_PAGE_12V_REAL	0x00
+#define YH5151E_PAGE_5V_LOG	0x01
+#define YH5151E_PAGE_5V_REAL	0x10
+#define YH5151E_PAGE_3V3_LOG	0x02
+#define YH5151E_PAGE_3V3_REAL	0x11
+
+enum chips {
+	ym2151e,
+	yh5151e
+};
+
+struct fsp3y_data {
+	struct pmbus_driver_info info;
+	int chip;
+	int page;
+};
+
+#define to_fsp3y_data(x) container_of(x, struct fsp3y_data, info)
+
+static int page_log_to_page_real(int page_log, enum chips chip)
+{
+	switch (chip) {
+	case ym2151e:
+		switch (page_log) {
+		case YM2151_PAGE_12V_LOG:
+			return YM2151_PAGE_12V_REAL;
+		case YM2151_PAGE_5VSB_LOG:
+			return YM2151_PAGE_5VSB_REAL;
+		}
+		return -EINVAL;
+	case yh5151e:
+		switch (page_log) {
+		case YH5151E_PAGE_12V_LOG:
+			return YH5151E_PAGE_12V_REAL;
+		case YH5151E_PAGE_5V_LOG:
+			return YH5151E_PAGE_5V_LOG;
+		case YH5151E_PAGE_3V3_LOG:
+			return YH5151E_PAGE_3V3_REAL;
+		}
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int set_page(struct i2c_client *client, int page_log)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct fsp3y_data *data = to_fsp3y_data(info);
+	int rv;
+	int page_real;
+
+	if (page_log < 0)
+		return 0;
+
+	page_real = page_log_to_page_real(page_log, data->chip);
+	if (page_real < 0)
+		return page_real;
+
+	if (data->page != page_real) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page_real);
+		if (rv < 0)
+			return rv;
+
+		data->page = page_real;
+
+		/*
+		 * Testing showed that the device has a timing issue. After
+		 * setting a page, it takes a while, before the device actually
+		 * gives the correct values from the correct page. 20 ms was
+		 * tested to be enough to not give wrong values (15 ms wasn't
+		 * enough).
+		 */
+		usleep_range(20000, 30000);
+	}
+
+	return 0;
+}
+
+static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int rv;
+
+	rv = set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	int rv;
+
+	/*
+	 * This masks commands which weren't tested to work correctly. Some of
+	 * the masked commands return 0xFFFF. These would probably get tagged as
+	 * invalid by pmbus_core. Other ones do return values which might be
+	 * useful (that is, they are not 0xFFFF), but their encoding is unknown,
+	 * and so they are unsupported.
+	 */
+	switch (reg) {
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_IIN:
+	case PMBUS_READ_IOUT:
+	case PMBUS_READ_PIN:
+	case PMBUS_READ_POUT:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_VOUT:
+	case PMBUS_STATUS_WORD:
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	rv = set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_word_data(client, reg);
+}
+
+static struct pmbus_driver_info fsp3y_info[] = {
+	[ym2151e] = {
+		.pages = 2,
+		.func[YM2151_PAGE_12V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_PIN | PMBUS_HAVE_POUT  |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
+			PMBUS_HAVE_FAN12,
+		.func[YM2151_PAGE_5VSB_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT,
+			PMBUS_HAVE_IIN,
+		.read_word_data = fsp3y_read_word_data,
+		.read_byte_data = fsp3y_read_byte_data,
+	},
+	[yh5151e] = {
+		.pages = 3,
+		.func[YH5151E_PAGE_12V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT  |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3,
+		.func[YH5151E_PAGE_5V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT,
+		.func[YH5151E_PAGE_3V3_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT,
+		.read_word_data = fsp3y_read_word_data,
+		.read_byte_data = fsp3y_read_byte_data,
+	}
+};
+
+static int fsp3y_detect(struct i2c_client *client)
+{
+	int rv;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+
+	rv = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (rv < 0)
+		return rv;
+
+	buf[rv] = '\0';
+
+	if (rv == 8) {
+		if (!strcmp(buf, "YM-2151E"))
+			return ym2151e;
+		else if (!strcmp(buf, "YH-5151E"))
+			return yh5151e;
+	}
+
+	dev_err(&client->dev, "Unsupported model %.*s\n", rv, buf);
+	return -ENODEV;
+}
+
+static const struct i2c_device_id fsp3y_id[] = {
+	{"ym2151e", ym2151e},
+	{"yh5151e", yh5151e},
+	{ }
+};
+
+static int fsp3y_probe(struct i2c_client *client)
+{
+	struct fsp3y_data *data;
+	const struct i2c_device_id *id;
+	int rv;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct fsp3y_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->chip = fsp3y_detect(client);
+	if (data->chip < 0)
+		return data->chip;
+
+	id = i2c_match_id(fsp3y_id, client);
+	if (data->chip != id->driver_data)
+		dev_warn(&client->dev, "Device mismatch: Configured %s (%d), detected %d\n",
+			 id->name, (int)id->driver_data, data->chip);
+
+	rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+	if (rv < 0)
+		return rv;
+	data->page = rv;
+
+	data->info = fsp3y_info[data->chip];
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+MODULE_DEVICE_TABLE(i2c, fsp3y_id);
+
+static struct i2c_driver fsp3y_driver = {
+	.driver = {
+		   .name = "fsp3y",
+		   },
+	.probe_new = fsp3y_probe,
+	.id_table = fsp3y_id
+};
+
+module_i2c_driver(fsp3y_driver);
+
+MODULE_AUTHOR("Václav Kubernát");
+MODULE_DESCRIPTION("PMBus driver for FSP/3Y-Power power supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -625,3 +625,4 @@ module_i2c_driver(ibm_cffps_driver);
 MODULE_AUTHOR("Eddie James");
 MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/inspur-ipsps.c
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -70,7 +70,7 @@ static ssize_t ipsps_string_show(struct device *dev,
 	p = memscan(data, '#', rc);
 	*p = '\0';

-	return snprintf(buf, PAGE_SIZE, "%s\n", data);
+	return sysfs_emit(buf, "%s\n", data);
 }

 static ssize_t ipsps_fw_version_show(struct device *dev,
@@ -91,9 +91,9 @@ static ssize_t ipsps_fw_version_show(struct device *dev,
 	if (rc != 6)
 		return -EPROTO;

-	return snprintf(buf, PAGE_SIZE, "%u.%02u%u-%u.%02u\n",
-			data[1], data[2]/* < 100 */, data[3]/*< 10*/,
-			data[4], data[5]/* < 100 */);
+	return sysfs_emit(buf, "%u.%02u%u-%u.%02u\n",
+			  data[1], data[2]/* < 100 */, data[3]/*< 10*/,
+			  data[4], data[5]/* < 100 */);
 }

 static ssize_t ipsps_mode_show(struct device *dev,
@@ -111,19 +111,19 @@ static ssize_t ipsps_mode_show(struct device *dev,

 	switch (rc) {
 	case MODE_ACTIVE:
-		return snprintf(buf, PAGE_SIZE, "[%s] %s %s\n",
-				MODE_ACTIVE_STRING,
-				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+		return sysfs_emit(buf, "[%s] %s %s\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
 	case MODE_STANDBY:
-		return snprintf(buf, PAGE_SIZE, "%s [%s] %s\n",
-				MODE_ACTIVE_STRING,
-				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+		return sysfs_emit(buf, "%s [%s] %s\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
 	case MODE_REDUNDANCY:
-		return snprintf(buf, PAGE_SIZE, "%s %s [%s]\n",
-				MODE_ACTIVE_STRING,
-				MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+		return sysfs_emit(buf, "%s %s [%s]\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
 	default:
-		return snprintf(buf, PAGE_SIZE, "unspecified\n");
+		return sysfs_emit(buf, "unspecified\n");
 	}
 }

@@ -224,3 +224,4 @@ module_i2c_driver(ipsps_driver);
 MODULE_AUTHOR("John Wang");
 MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ir35221.c
+++ b/drivers/hwmon/pmbus/ir35221.c
@@ -145,3 +145,4 @@ module_i2c_driver(ir35221_driver);
 MODULE_AUTHOR("Samuel Mendoza-Jonas <sam@mendozajonas.com");
 MODULE_DESCRIPTION("PMBus driver for IR35221");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ir36021.c
+++ b/drivers/hwmon/pmbus/ir36021.c
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon IR36021
+ *
+ * Copyright (c) 2021 Allied Telesis
+ */
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info ir36021_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+		| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+		| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+		| PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int ir36021_probe(struct i2c_client *client)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_WORD_DATA
+				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_i2c_block_data(client, PMBUS_MFR_MODEL, 2, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
+		return ret;
+	}
+	if (ret != 2 || buf[0] != 0x01 || buf[1] != 0x2d) {
+		dev_err(&client->dev, "MFR_MODEL unrecognised\n");
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, &ir36021_info);
+}
+
+static const struct i2c_device_id ir36021_id[] = {
+	{ "ir36021", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ir36021_id);
+
+static const struct of_device_id __maybe_unused ir36021_of_id[] = {
+	{ .compatible = "infineon,ir36021" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ir36021_of_id);
+
+static struct i2c_driver ir36021_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "ir36021",
+		.of_match_table = of_match_ptr(ir36021_of_id),
+	},
+	.probe_new = ir36021_probe,
+	.id_table = ir36021_id,
+};
+
+module_i2c_driver(ir36021_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("PMBus driver for Infineon IR36021");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ir38064.c
+++ b/drivers/hwmon/pmbus/ir38064.c
@@ -61,3 +61,4 @@ module_i2c_driver(ir38064_driver);
 MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
 MODULE_DESCRIPTION("PMBus driver for Infineon IR38064");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/irps5401.c
+++ b/drivers/hwmon/pmbus/irps5401.c
@@ -63,3 +63,4 @@ module_i2c_driver(irps5401_driver);
 MODULE_AUTHOR("Robert Hancock");
 MODULE_DESCRIPTION("PMBus driver for Infineon IRPS5401");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/isl68137.c
+++ b/drivers/hwmon/pmbus/isl68137.c
@@ -332,3 +332,4 @@ module_i2c_driver(isl68137_driver);
 MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
 MODULE_DESCRIPTION("PMBus driver for Renesas digital multiphase voltage regulators");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/lm25066.c
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -511,3 +511,4 @@ module_i2c_driver(lm25066_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -883,3 +883,4 @@ module_i2c_driver(ltc2978_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for LTC2978 and compatible chips");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ltc3815.c
+++ b/drivers/hwmon/pmbus/ltc3815.c
@@ -208,3 +208,4 @@ module_i2c_driver(ltc3815_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for LTC3815");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max15301.c
+++ b/drivers/hwmon/pmbus/max15301.c
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX15301
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB
+ *
+ * Even though the specification does not specifically mention it,
+ * extensive empirical testing has revealed that auto-detection of
+ * limit-registers will fail in a random fashion unless the delay
+ * parameter is set to above about 80us. The default delay is set
+ * to 100us to include some safety margin.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static const struct i2c_device_id max15301_id[] = {
+	{"bmr461", 0},
+	{"max15301", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max15301_id);
+
+struct max15301_data {
+	int id;
+	ktime_t access;		/* Chip access time */
+	int delay;		/* Delay between chip accesses in us */
+	struct pmbus_driver_info info;
+};
+
+#define to_max15301_data(x)  container_of(x, struct max15301_data, info)
+
+#define MAX15301_WAIT_TIME		100	/* us	*/
+
+static ushort delay = MAX15301_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in us");
+
+static struct max15301_data max15301_data = {
+	.info = {
+		.pages = 1,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+			| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+			| PMBUS_HAVE_STATUS_TEMP
+			| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+	}
+};
+
+/* This chip needs a delay between accesses */
+static inline void max15301_wait(const struct max15301_data *data)
+{
+	if (data->delay) {
+		s64 delta = ktime_us_delta(ktime_get(), data->access);
+
+		if (delta < data->delay)
+			udelay(data->delay - delta);
+	}
+}
+
+static int max15301_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_read_word_data(client, page, phase, reg);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_read_byte_data(client, page, reg);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_write_word_data(struct i2c_client *client, int page, int reg,
+				    u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_write_word_data(client, page, reg, word);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_write_byte(client, page, value);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_probe(struct i2c_client *client)
+{
+	int status;
+	u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+	const struct i2c_device_id *mid;
+	struct pmbus_driver_info *info = &max15301_data.info;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	status = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, device_id);
+	if (status < 0) {
+		dev_err(&client->dev, "Failed to read Device Id\n");
+		return status;
+	}
+	for (mid = max15301_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	max15301_data.delay = delay;
+
+	info->read_byte_data = max15301_read_byte_data;
+	info->read_word_data = max15301_read_word_data;
+	info->write_byte = max15301_write_byte;
+	info->write_word_data = max15301_write_word_data;
+
+	return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver max15301_driver = {
+	.driver = {
+		   .name = "max15301",
+		   },
+	.probe_new = max15301_probe,
+	.id_table = max15301_id,
+};
+
+module_i2c_driver(max15301_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX15301");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max16064.c
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -111,3 +111,4 @@ module_i2c_driver(max16064_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max16601.c
+++ b/drivers/hwmon/pmbus/max16601.c
@@ -359,3 +359,4 @@ module_i2c_driver(max16601_driver);
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX16601");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max20730.c
+++ b/drivers/hwmon/pmbus/max20730.c
@@ -785,3 +785,4 @@ module_i2c_driver(max20730_driver);
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX20710 / MAX20730 / MAX20734 / MAX20743");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max20751.c
+++ b/drivers/hwmon/pmbus/max20751.c
@@ -51,3 +51,4 @@ module_i2c_driver(max20751_driver);
 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max31785.c
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -403,3 +403,4 @@ module_i2c_driver(max31785_driver);
 MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
 MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max34440.c
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -529,3 +529,4 @@ module_i2c_driver(max34440_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/max8688.c
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -191,3 +191,4 @@ module_i2c_driver(max8688_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/mp2975.c
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -766,3 +766,4 @@ module_i2c_driver(mp2975_driver);
 MODULE_AUTHOR("Vadim Pasternak <vadimp@nvidia.com>");
 MODULE_DESCRIPTION("PMBus driver for MPS MP2975 device");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/pm6764tr.c
+++ b/drivers/hwmon/pmbus/pm6764tr.c
@@ -73,3 +73,4 @@ module_i2c_driver(pm6764tr_driver);
 MODULE_AUTHOR("Charles Hsu");
 MODULE_DESCRIPTION("PMBus driver for  ST PM6764TR");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/pmbus.c
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -246,3 +246,4 @@ module_i2c_driver(pmbus_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("Generic PMBus driver");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -475,6 +475,7 @@ extern const struct regulator_ops pmbus_regulator_ops;
 /* Function declarations */

 void pmbus_clear_cache(struct i2c_client *client);
+void pmbus_set_update(struct i2c_client *client, u8 reg, bool update);
 int pmbus_set_page(struct i2c_client *client, int page, int phase);
 int pmbus_read_word_data(struct i2c_client *client, int page, int phase,
 			 u8 reg);

--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
--- a/drivers/hwmon/pmbus/pxe1610.c
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -41,6 +41,15 @@ static int pxe1610_identify(struct i2c_client *client,
 				info->vrm_version[i] = vr13;
 				break;
 			default:
+				/*
+				 * If prior pages are available limit operation
+				 * to them
+				 */
+				if (i != 0) {
+					info->pages = i;
+					return 0;
+				}
+
 				return -ENODEV;
 			}
 		}
@@ -139,3 +148,4 @@ module_i2c_driver(pxe1610_driver);
 MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
 MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/q54sj108a2.c
+++ b/drivers/hwmon/pmbus/q54sj108a2.c
@@ -420,3 +420,4 @@ module_i2c_driver(q54sj108a2_driver);
 MODULE_AUTHOR("Xiao.Ma <xiao.mx.ma@deltaww.com>");
 MODULE_DESCRIPTION("PMBus driver for Delta Q54SJ108A2 series modules");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/stpddc60.c
+++ b/drivers/hwmon/pmbus/stpddc60.c
--- a/drivers/hwmon/pmbus/tps40422.c
+++ b/drivers/hwmon/pmbus/tps40422.c
@@ -51,3 +51,4 @@ module_i2c_driver(tps40422_driver);
 MODULE_AUTHOR("Zhu Laiwen <richard.zhu@nsn.com>");
 MODULE_DESCRIPTION("PMBus driver for TI TPS40422");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/tps53679.c
+++ b/drivers/hwmon/pmbus/tps53679.c
--- a/drivers/hwmon/pmbus/ucd9000.c
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -629,3 +629,4 @@ module_i2c_driver(ucd9000_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/ucd9200.c
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -209,3 +209,4 @@ module_i2c_driver(ucd9200_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/xdpe12284.c
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -168,3 +168,4 @@ module_i2c_driver(xdpe122_driver);
 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
 MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -404,3 +404,4 @@ module_i2c_driver(zl6100_driver);
 MODULE_AUTHOR("Guenter Roeck");
 MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
--- a/drivers/hwmon/sch5627.c
+++ b/drivers/hwmon/sch5627.c
--- a/drivers/hwmon/sch5636.c
+++ b/drivers/hwmon/sch5636.c
--- a/drivers/hwmon/smm665.c
+++ b/drivers/hwmon/smm665.c
--- a/drivers/hwmon/stts751.c
+++ b/drivers/hwmon/stts751.c
--- a/drivers/hwmon/vexpress-hwmon.c
+++ b/drivers/hwmon/vexpress-hwmon.c
--- a/drivers/hwmon/xgene-hwmon.c
+++ b/drivers/hwmon/xgene-hwmon.c
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c