Merge branch 'exynos-dp-next' of git://github.com/jingoo/linux into for-linus

Exynos DP changes for the 3.8 merge window.

- Device Tree support for Samsung Exynos DP
- SW Link training is cleaned up.
- HPD interrupt is supported.

* 'exynos-dp-next' of git://github.com/jingoo/linux:
  video: exynos_dp: remove redundant parameters
  video: exynos_dp: Fix incorrect setting for INT_CTL
  video: exynos_dp: Reset and initialize DP before requesting irq
  video: exynos_dp: Enable hotplug interrupts
  video: exynos_dp: Move hotplug into a workqueue
  video: exynos_dp: Remove sink control to D0
  video: exynos_dp: Fix bug when checking dp->irq
  video: exynos_dp: Improve EDID error handling
  video: exynos_dp: Get pll lock before pattern set
  video: exynos_dp: Clean up SW link training
  video: exynos_dp: Check DPCD return codes
  video: exynos_dp: device tree documentation
  video: exynos_dp: Add device tree support to DP driver

Documentation/devicetree/bindings/video/exynos_dp.txt

+The Exynos display port interface should be configured based on
+the type of panel connected to it.
+
+We use two nodes:
+	-dp-controller node
+	-dptx-phy node(defined inside dp-controller node)
+
+For the DP-PHY initialization, we use the dptx-phy node.
+Required properties for dptx-phy:
+	-reg:
+		Base address of DP PHY register.
+	-samsung,enable-mask:
+		The bit-mask used to enable/disable DP PHY.
+
+For the Panel initialization, we read data from dp-controller node.
+Required properties for dp-controller:
+	-compatible:
+		should be "samsung,exynos5-dp".
+	-reg:
+		physical base address of the controller and length
+		of memory mapped region.
+	-interrupts:
+		interrupt combiner values.
+	-interrupt-parent:
+		phandle to Interrupt combiner node.
+	-samsung,color-space:
+		input video data format.
+			COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
+	-samsung,dynamic-range:
+		dynamic range for input video data.
+			VESA = 0, CEA = 1
+	-samsung,ycbcr-coeff:
+		YCbCr co-efficients for input video.
+			COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
+	-samsung,color-depth:
+		number of bits per colour component.
+			COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
+	-samsung,link-rate:
+		link rate supported by the panel.
+			LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
+	-samsung,lane-count:
+		number of lanes supported by the panel.
+			LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+
+Optional properties for dp-controller:
+	-interlaced:
+		interlace scan mode.
+			Progressive if defined, Interlaced if not defined
+	-vsync-active-high:
+		VSYNC polarity configuration.
+			High if defined, Low if not defined
+	-hsync-active-high:
+		HSYNC polarity configuration.
+			High if defined, Low if not defined
+
+Example:
+
+SOC specific portion:
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x10000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+
+		dptx-phy {
+			reg = <0x10040720>;
+			samsung,enable-mask = <1>;
+		};
+
+	};
+
+Board Specific portion:
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};

drivers/video/exynos/exynos_dp_core.h

@@ -13,6 +13,13 @@
 #ifndef _EXYNOS_DP_CORE_H
 #define _EXYNOS_DP_CORE_H
 
+enum dp_irq_type {
+	DP_IRQ_TYPE_HP_CABLE_IN,
+	DP_IRQ_TYPE_HP_CABLE_OUT,
+	DP_IRQ_TYPE_HP_CHANGE,
+	DP_IRQ_TYPE_UNKNOWN,
+};
+
 struct link_train {
 	int eq_loop;
 	int cr_loop[4];
@@ -29,9 +36,12 @@ struct exynos_dp_device {
 	struct clk		*clock;
 	unsigned int		irq;
 	void __iomem		*reg_base;
+	void __iomem		*phy_addr;
+	unsigned int		enable_mask;
 
 	struct video_info	*video_info;
 	struct link_train	link_train;
+	struct work_struct	hotplug_work;
 };
 
 /* exynos_dp_reg.c */
@@ -50,6 +60,8 @@ void exynos_dp_set_analog_power_down(struct exynos_dp_device *dp,
 				bool enable);
 void exynos_dp_init_analog_func(struct exynos_dp_device *dp);
 void exynos_dp_init_hpd(struct exynos_dp_device *dp);
+enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp);
+void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp);
 void exynos_dp_reset_aux(struct exynos_dp_device *dp);
 void exynos_dp_init_aux(struct exynos_dp_device *dp);
 int exynos_dp_get_plug_in_status(struct exynos_dp_device *dp);
@@ -107,11 +119,7 @@ u32 exynos_dp_get_lane3_link_training(struct exynos_dp_device *dp);
 void exynos_dp_reset_macro(struct exynos_dp_device *dp);
 void exynos_dp_init_video(struct exynos_dp_device *dp);
 
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp,
-				u32 color_depth,
-				u32 color_space,
-				u32 dynamic_range,
-				u32 ycbcr_coeff);
+void exynos_dp_set_video_color_format(struct exynos_dp_device *dp);
 int exynos_dp_is_slave_video_stream_clock_on(struct exynos_dp_device *dp);
 void exynos_dp_set_video_cr_mn(struct exynos_dp_device *dp,
 			enum clock_recovery_m_value_type type,
@@ -121,8 +129,7 @@ void exynos_dp_set_video_timing_mode(struct exynos_dp_device *dp, u32 type);
 void exynos_dp_enable_video_master(struct exynos_dp_device *dp, bool enable);
 void exynos_dp_start_video(struct exynos_dp_device *dp);
 int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp);
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
-			struct video_info *video_info);
+void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp);
 void exynos_dp_enable_scrambling(struct exynos_dp_device *dp);
 void exynos_dp_disable_scrambling(struct exynos_dp_device *dp);
 

drivers/video/exynos/exynos_dp_reg.c

@@ -19,11 +19,11 @@
 #include "exynos_dp_core.h"
 #include "exynos_dp_reg.h"
 
-#define COMMON_INT_MASK_1 (0)
-#define COMMON_INT_MASK_2 (0)
-#define COMMON_INT_MASK_3 (0)
-#define COMMON_INT_MASK_4 (0)
-#define INT_STA_MASK (0)
+#define COMMON_INT_MASK_1	0
+#define COMMON_INT_MASK_2	0
+#define COMMON_INT_MASK_3	0
+#define COMMON_INT_MASK_4	(HOTPLUG_CHG | HPD_LOST | PLUG)
+#define INT_STA_MASK		INT_HPD
 
 void exynos_dp_enable_video_mute(struct exynos_dp_device *dp, bool enable)
 {
@@ -88,7 +88,7 @@ void exynos_dp_init_analog_param(struct exynos_dp_device *dp)
 void exynos_dp_init_interrupt(struct exynos_dp_device *dp)
 {
 	/* Set interrupt pin assertion polarity as high */
-	writel(INT_POL, dp->reg_base + EXYNOS_DP_INT_CTL);
+	writel(INT_POL1 | INT_POL0, dp->reg_base + EXYNOS_DP_INT_CTL);
 
 	/* Clear pending regisers */
 	writel(0xff, dp->reg_base + EXYNOS_DP_COMMON_INT_STA_1);
@@ -324,7 +324,7 @@ void exynos_dp_init_analog_func(struct exynos_dp_device *dp)
 	writel(reg, dp->reg_base + EXYNOS_DP_FUNC_EN_2);
 }
 
-void exynos_dp_init_hpd(struct exynos_dp_device *dp)
+void exynos_dp_clear_hotplug_interrupts(struct exynos_dp_device *dp)
 {
 	u32 reg;
 
@@ -333,12 +333,38 @@ void exynos_dp_init_hpd(struct exynos_dp_device *dp)
 
 	reg = INT_HPD;
 	writel(reg, dp->reg_base + EXYNOS_DP_INT_STA);
+}
+
+void exynos_dp_init_hpd(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	exynos_dp_clear_hotplug_interrupts(dp);
 
 	reg = readl(dp->reg_base + EXYNOS_DP_SYS_CTL_3);
 	reg &= ~(F_HPD | HPD_CTRL);
 	writel(reg, dp->reg_base + EXYNOS_DP_SYS_CTL_3);
 }
 
+enum dp_irq_type exynos_dp_get_irq_type(struct exynos_dp_device *dp)
+{
+	u32 reg;
+
+	/* Parse hotplug interrupt status register */
+	reg = readl(dp->reg_base + EXYNOS_DP_COMMON_INT_STA_4);
+
+	if (reg & PLUG)
+		return DP_IRQ_TYPE_HP_CABLE_IN;
+
+	if (reg & HPD_LOST)
+		return DP_IRQ_TYPE_HP_CABLE_OUT;
+
+	if (reg & HOTPLUG_CHG)
+		return DP_IRQ_TYPE_HP_CHANGE;
+
+	return DP_IRQ_TYPE_UNKNOWN;
+}
+
 void exynos_dp_reset_aux(struct exynos_dp_device *dp)
 {
 	u32 reg;
@@ -491,7 +517,7 @@ int exynos_dp_read_byte_from_dpcd(struct exynos_dp_device *dp,
 	int i;
 	int retval;
 
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 3; i++) {
 		/* Clear AUX CH data buffer */
 		reg = BUF_CLR;
 		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
@@ -552,7 +578,7 @@ int exynos_dp_write_bytes_to_dpcd(struct exynos_dp_device *dp,
 		else
 			cur_data_count = count - start_offset;
 
-		for (i = 0; i < 10; i++) {
+		for (i = 0; i < 3; i++) {
 			/* Select DPCD device address */
 			reg = AUX_ADDR_7_0(reg_addr + start_offset);
 			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
@@ -617,7 +643,7 @@ int exynos_dp_read_bytes_from_dpcd(struct exynos_dp_device *dp,
 			cur_data_count = count - start_offset;
 
 		/* AUX CH Request Transaction process */
-		for (i = 0; i < 10; i++) {
+		for (i = 0; i < 3; i++) {
 			/* Select DPCD device address */
 			reg = AUX_ADDR_7_0(reg_addr + start_offset);
 			writel(reg, dp->reg_base + EXYNOS_DP_AUX_ADDR_7_0);
@@ -700,17 +726,15 @@ int exynos_dp_read_byte_from_i2c(struct exynos_dp_device *dp,
 	int i;
 	int retval;
 
-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 3; i++) {
 		/* Clear AUX CH data buffer */
 		reg = BUF_CLR;
 		writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
 
 		/* Select EDID device */
 		retval = exynos_dp_select_i2c_device(dp, device_addr, reg_addr);
-		if (retval != 0) {
-			dev_err(dp->dev, "Select EDID device fail!\n");
+		if (retval != 0)
 			continue;
-		}
 
 		/*
 		 * Set I2C transaction and read data
@@ -750,7 +774,7 @@ int exynos_dp_read_bytes_from_i2c(struct exynos_dp_device *dp,
 	int retval = 0;
 
 	for (i = 0; i < count; i += 16) {
-		for (j = 0; j < 100; j++) {
+		for (j = 0; j < 3; j++) {
 			/* Clear AUX CH data buffer */
 			reg = BUF_CLR;
 			writel(reg, dp->reg_base + EXYNOS_DP_BUFFER_DATA_CTL);
@@ -1034,24 +1058,20 @@ void exynos_dp_init_video(struct exynos_dp_device *dp)
 	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_8);
 }
 
-void exynos_dp_set_video_color_format(struct exynos_dp_device *dp,
-			u32 color_depth,
-			u32 color_space,
-			u32 dynamic_range,
-			u32 ycbcr_coeff)
+void exynos_dp_set_video_color_format(struct exynos_dp_device *dp)
 {
 	u32 reg;
 
 	/* Configure the input color depth, color space, dynamic range */
-	reg = (dynamic_range << IN_D_RANGE_SHIFT) |
-		(color_depth << IN_BPC_SHIFT) |
-		(color_space << IN_COLOR_F_SHIFT);
+	reg = (dp->video_info->dynamic_range << IN_D_RANGE_SHIFT) |
+		(dp->video_info->color_depth << IN_BPC_SHIFT) |
+		(dp->video_info->color_space << IN_COLOR_F_SHIFT);
 	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_2);
 
 	/* Set Input Color YCbCr Coefficients to ITU601 or ITU709 */
 	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_3);
 	reg &= ~IN_YC_COEFFI_MASK;
-	if (ycbcr_coeff)
+	if (dp->video_info->ycbcr_coeff)
 		reg |= IN_YC_COEFFI_ITU709;
 	else
 		reg |= IN_YC_COEFFI_ITU601;
@@ -1178,8 +1198,7 @@ int exynos_dp_is_video_stream_on(struct exynos_dp_device *dp)
 	return 0;
 }
 
-void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
-			struct video_info *video_info)
+void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp)
 {
 	u32 reg;
 
@@ -1190,17 +1209,17 @@ void exynos_dp_config_video_slave_mode(struct exynos_dp_device *dp,
 
 	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 	reg &= ~INTERACE_SCAN_CFG;
-	reg |= (video_info->interlaced << 2);
+	reg |= (dp->video_info->interlaced << 2);
 	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 
 	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 	reg &= ~VSYNC_POLARITY_CFG;
-	reg |= (video_info->v_sync_polarity << 1);
+	reg |= (dp->video_info->v_sync_polarity << 1);
 	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 
 	reg = readl(dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 	reg &= ~HSYNC_POLARITY_CFG;
-	reg |= (video_info->h_sync_polarity << 0);
+	reg |= (dp->video_info->h_sync_polarity << 0);
 	writel(reg, dp->reg_base + EXYNOS_DP_VIDEO_CTL_10);
 
 	reg = AUDIO_MODE_SPDIF_MODE | VIDEO_MODE_SLAVE_MODE;

drivers/video/exynos/exynos_dp_reg.h

@@ -242,7 +242,8 @@
 
 /* EXYNOS_DP_INT_CTL */
 #define SOFT_INT_CTRL				(0x1 << 2)
-#define INT_POL					(0x1 << 0)
+#define INT_POL1				(0x1 << 1)
+#define INT_POL0				(0x1 << 0)
 
 /* EXYNOS_DP_SYS_CTL_1 */
 #define DET_STA					(0x1 << 2)