Commit 473fe736 authored by Mark Brown's avatar Mark Brown Committed by Samuel Ortiz

mfd: Use completion interrupt for WM831x AUXADC

Use the completion interrupt generated by the device rather than
polling for conversions to complete. As a backup we still check
the status of the AUXADC if we don't get a completion, mostly for
systems that don't have the WM831x interrupt infrastructure hooked
up.

Also reduce the timeout for completion of conversions to 5ms from
the previous 10ms, the lower timeout should be sufficient.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: default avatarSamuel Ortiz <sameo@linux.intel.com>
parent d19663ac
......@@ -321,7 +321,6 @@ EXPORT_SYMBOL_GPL(wm831x_set_bits);
*/
int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
{
int tries = 10;
int ret, src;
mutex_lock(&wm831x->auxadc_lock);
......@@ -349,13 +348,14 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
goto disable;
}
do {
msleep(1);
/* Ignore the result to allow us to soldier on without IRQ hookup */
wait_for_completion_timeout(&wm831x->auxadc_done, msecs_to_jiffies(5));
ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
if (ret < 0)
ret = WM831X_AUX_CVT_ENA;
} while ((ret & WM831X_AUX_CVT_ENA) && --tries);
ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
if (ret < 0) {
dev_err(wm831x->dev, "AUXADC status read failed: %d\n", ret);
goto disable;
}
if (ret & WM831X_AUX_CVT_ENA) {
dev_err(wm831x->dev, "Timed out reading AUXADC\n");
......@@ -390,6 +390,15 @@ int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
}
EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
static irqreturn_t wm831x_auxadc_irq(int irq, void *irq_data)
{
struct wm831x *wm831x = irq_data;
complete(&wm831x->auxadc_done);
return IRQ_HANDLED;
}
/**
* wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
*
......@@ -1411,6 +1420,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
mutex_init(&wm831x->io_lock);
mutex_init(&wm831x->key_lock);
mutex_init(&wm831x->auxadc_lock);
init_completion(&wm831x->auxadc_done);
dev_set_drvdata(wm831x->dev, wm831x);
ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
......@@ -1523,6 +1533,16 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
if (ret != 0)
goto err;
if (wm831x->irq_base) {
ret = request_threaded_irq(wm831x->irq_base +
WM831X_IRQ_AUXADC_DATA,
NULL, wm831x_auxadc_irq, 0,
"auxadc", wm831x);
if (ret < 0)
dev_err(wm831x->dev, "AUXADC IRQ request failed: %d\n",
ret);
}
/* The core device is up, instantiate the subdevices. */
switch (parent) {
case WM8310:
......@@ -1593,6 +1613,8 @@ static void wm831x_device_exit(struct wm831x *wm831x)
{
wm831x_otp_exit(wm831x);
mfd_remove_devices(wm831x->dev);
if (wm831x->irq_base)
free_irq(wm831x->irq_base + WM831X_IRQ_AUXADC_DATA, wm831x);
wm831x_irq_exit(wm831x);
kfree(wm831x);
}
......
......@@ -15,6 +15,7 @@
#ifndef __MFD_WM831X_CORE_H__
#define __MFD_WM831X_CORE_H__
#include <linux/completion.h>
#include <linux/interrupt.h>
/*
......@@ -261,6 +262,7 @@ struct wm831x {
int num_gpio;
struct mutex auxadc_lock;
struct completion auxadc_done;
/* The WM831x has a security key blocking access to certain
* registers. The mutex is taken by the accessors for locking
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment