Commit 4775bfac authored by Gwenhael Goavec-Merou's avatar Gwenhael Goavec-Merou Committed by Greg Kroah-Hartman

net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset function

[ Upstream commit 21009686 ]

On the one hand, phy_device.c provides a generic reset function if the phy
driver does not provide a soft_reset pointer. This generic reset does not take
into account the state of the phy, with a potential failure if the phy is in
powerdown mode. On the other hand, smsc driver provides a function with both
correct reset behaviour and configuration.

This patch moves the reset part into a new smsc_phy_reset function and provides
the soft_reset pointer to have a correct reset behaviour by default.
Signed-off-by: default avatarGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Reviewed-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 638228c5
......@@ -42,6 +42,22 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
}
static int smsc_phy_config_init(struct phy_device *phydev)
{
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
/* Enable energy detect mode for this SMSC Transceivers */
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
return smsc_phy_ack_interrupt(phydev);
}
static int smsc_phy_reset(struct phy_device *phydev)
{
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
if (rc < 0)
......@@ -66,18 +82,7 @@ static int smsc_phy_config_init(struct phy_device *phydev)
rc = phy_read(phydev, MII_BMCR);
} while (rc & BMCR_RESET);
}
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
/* Enable energy detect mode for this SMSC Transceivers */
rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
if (rc < 0)
return rc;
return smsc_phy_ack_interrupt (phydev);
return 0;
}
static int lan911x_config_init(struct phy_device *phydev)
......@@ -142,6 +147,7 @@ static struct phy_driver smsc_phy_driver[] = {
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
......@@ -164,6 +170,7 @@ static struct phy_driver smsc_phy_driver[] = {
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
......@@ -186,6 +193,7 @@ static struct phy_driver smsc_phy_driver[] = {
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
......@@ -230,6 +238,7 @@ static struct phy_driver smsc_phy_driver[] = {
.config_aneg = genphy_config_aneg,
.read_status = lan87xx_read_status,
.config_init = smsc_phy_config_init,
.soft_reset = smsc_phy_reset,
/* IRQ related */
.ack_interrupt = smsc_phy_ack_interrupt,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment