Commit 479e9b94 authored by Peter Hurley's avatar Peter Hurley Committed by Greg Kroah-Hartman

serial: Refactor uart_flush_buffer() from uart_close()

In the context of the final tty & port close, flushing the tx
ring buffer after the hardware has already been shutdown and
the ring buffer freed is neither required nor desirable.

uart_flush_buffer() performs 3 operations:
1. Resets tx ring buffer indices, but the tx ring buffer has
   already been freed and the indices are reset if the port is
   re-opened.
2. Calls uart driver's flush_buffer() method
   5 in-tree uart drivers define flush_buffer() methods:
     amba-pl011, atmel-serial, imx, serial-tegra, timbuart
   These have been refactored into the shutdown() method, if
   required.
3. Kicks the ldisc for more writing, but this is undesirable.
   The file handle is being released; any waiting writer will
   will be kicked out by tty_release() with a warning. Further,
   the N_TTY ldisc may generate SIGIO for a file handle which
   is no longer valid.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 86c80a8e
......@@ -1689,6 +1689,7 @@ static void pl011_shutdown(struct uart_port *port)
plat->exit();
}
pl011_dma_flush_buffer(port);
}
static void
......
......@@ -1801,6 +1801,20 @@ static int atmel_startup(struct uart_port *port)
return retval;
}
/*
* Flush any TX data submitted for DMA. Called when the TX circular
* buffer is reset.
*/
static void atmel_flush_buffer(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
}
/*
* Disable the port
*/
......@@ -1852,20 +1866,8 @@ static void atmel_shutdown(struct uart_port *port)
atmel_free_gpio_irq(port);
atmel_port->ms_irq_enabled = false;
}
/*
* Flush any TX data submitted for DMA. Called when the TX circular
* buffer is reset.
*/
static void atmel_flush_buffer(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
atmel_flush_buffer(port);
}
/*
......
......@@ -1034,6 +1034,20 @@ static int tegra_uart_startup(struct uart_port *u)
return ret;
}
/*
* Flush any TX data submitted for DMA and PIO. Called when the
* TX circular buffer is reset.
*/
static void tegra_uart_flush_buffer(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
tup->tx_bytes = 0;
if (tup->tx_dma_chan)
dmaengine_terminate_all(tup->tx_dma_chan);
return;
}
static void tegra_uart_shutdown(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
......@@ -1046,6 +1060,8 @@ static void tegra_uart_shutdown(struct uart_port *u)
tegra_uart_dma_channel_free(tup, true);
tegra_uart_dma_channel_free(tup, false);
free_irq(u->irq, tup);
tegra_uart_flush_buffer(u);
}
static void tegra_uart_enable_ms(struct uart_port *u)
......@@ -1174,20 +1190,6 @@ static void tegra_uart_set_termios(struct uart_port *u,
return;
}
/*
* Flush any TX data submitted for DMA and PIO. Called when the
* TX circular buffer is reset.
*/
static void tegra_uart_flush_buffer(struct uart_port *u)
{
struct tegra_uart_port *tup = to_tegra_uport(u);
tup->tx_bytes = 0;
if (tup->tx_dma_chan)
dmaengine_terminate_all(tup->tx_dma_chan);
return;
}
static const char *tegra_uart_type(struct uart_port *u)
{
return TEGRA_UART_TYPE;
......
......@@ -1361,7 +1361,6 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
mutex_lock(&port->mutex);
uart_shutdown(tty, state);
uart_flush_buffer(tty);
tty_ldisc_flush(tty);
......
......@@ -273,6 +273,8 @@ static void timbuart_shutdown(struct uart_port *port)
dev_dbg(port->dev, "%s\n", __func__);
free_irq(port->irq, uart);
iowrite32(0, port->membase + TIMBUART_IER);
timbuart_flush_buffer(port);
}
static int get_bindex(int baud)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment