usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory

Moves the s3c-hsotg driver into the dwc2 directory and uses the
dwc2 defines in hw.h. Renames s3c-hsotg.c to gadget.c.

NOTE: You can build both host and peripheral as a dynamically
linked module, but be aware that if you insmod dwc2_gadget, then
rmmod it, then insmod dwc2 and dwc2_platform for host mode, this
will not work. As the step to rmmod dwc2_gadget.ko will turn off
the clock to the USB IP. The dwc2 host driver currently does not
look to turn on a clock yet. A patch to fix that will be coming
soon.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
[ jh,rb - For gadget part only: ]
Tested-by: Jingoo Han <jg1.han@samsung.com>
Tested-by: Robert Baldyga <r.baldyga@samsung.com>
[ pz: Folded Kconfig/Makefile changes, which were originally in
  a separate patch, into this one, to avoid a build breakage.
  Modified Kconfig/Makefile changes a bit. Tested host part only. ]
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc2/Kconfig

 config USB_DWC2
-	tristate "DesignWare USB2 DRD Core Support"
+	bool "DesignWare USB2 DRD Core Support"
 	depends on USB
 	help
-	  Say Y or M here if your system has a Dual Role HighSpeed
-	  USB controller based on the DesignWare HSOTG IP Core.
+	  Say Y here if your system has a Dual Role Hi-Speed USB
+	  controller based on the DesignWare HSOTG IP Core.
 
-	  If you choose to build this driver as dynamically linked
-	  modules, the core module will be called dwc2.ko, the
-	  PCI bus interface module (if you have a PCI bus system)
-	  will be called dwc2_pci.ko and the platform interface module
-	  (for controllers directly connected to the CPU) will be called
-	  dwc2_platform.ko.
+	  For host mode, if you choose to build the driver as dynamically
+	  linked modules, the core module will be called dwc2.ko, the PCI
+	  bus interface module (if you have a PCI bus system) will be
+	  called dwc2_pci.ko, and the platform interface module (for
+	  controllers directly connected to the CPU) will be called
+	  dwc2_platform.ko. For gadget mode, there will be a single
+	  module called dwc2_gadget.ko.
 
-	  NOTE: This driver at present only implements the Host mode
-	  of the controller. The existing s3c-hsotg driver supports
-	  Peripheral mode, but only for the Samsung S3C platforms.
-	  There are plans to merge the s3c-hsotg driver with this
-	  driver in the near future to create a dual-role driver.
+	  NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The
+	  host and gadget drivers are still currently separate drivers.
+	  There are plans to merge the dwc2_gadget driver with the dwc2
+	  host driver in the near future to create a dual-role driver.
 
 if USB_DWC2
 
+config USB_DWC2_HOST
+	tristate "Host only mode"
+	depends on USB
+	help
+	  The Designware USB2.0 high-speed host controller
+	  integrated into many SoCs.
+
+config USB_DWC2_PLATFORM
+	bool "DWC2 Platform"
+	depends on USB_DWC2_HOST
+	default USB_DWC2_HOST
+	help
+	  The Designware USB2.0 platform interface module for
+	  controllers directly connected to the CPU. This is only
+	  used for host mode.
+
+config USB_DWC2_PCI
+	bool "DWC2 PCI"
+	depends on USB_DWC2_HOST && PCI
+	default USB_DWC2_HOST
+	help
+	  The Designware USB2.0 PCI interface module for controllers
+	  connected to a PCI bus. This is only used for host mode.
+
+comment "Gadget mode requires USB Gadget support to be enabled"
+
+config USB_DWC2_PERIPHERAL
+	tristate "Gadget only mode"
+	depends on USB_GADGET
+	help
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs.
+
 config USB_DWC2_DEBUG
 	bool "Enable Debugging Messages"
 	help

drivers/usb/dwc2/Makefile

 ccflags-$(CONFIG_USB_DWC2_DEBUG)	+= -DDEBUG
 ccflags-$(CONFIG_USB_DWC2_VERBOSE)	+= -DVERBOSE_DEBUG
 
-obj-$(CONFIG_USB_DWC2)			+= dwc2.o
-
-dwc2-y					+= core.o core_intr.o
-
-# NOTE: This driver at present only implements the Host mode
-# of the controller. The existing s3c-hsotg driver supports
-# Peripheral mode, but only for the Samsung S3C platforms.
-# There are plans to merge the s3c-hsotg driver with this
-# driver in the near future to create a dual-role driver. Once
-# that is done, Host mode will become an optional feature that
-# is selected with a config option.
-
+obj-$(CONFIG_USB_DWC2_HOST)		+= dwc2.o
+dwc2-y					:= core.o core_intr.o
 dwc2-y					+= hcd.o hcd_intr.o
 dwc2-y					+= hcd_queue.o hcd_ddma.o
 
-ifneq ($(CONFIG_PCI),)
-	obj-$(CONFIG_USB_DWC2)		+= dwc2_pci.o
+# NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
+# this location and renamed gadget.c. When building for dynamically linked
+# modules, dwc2_gadget.ko will get built for peripheral mode. For host mode,
+# the core module will be dwc2.ko, the PCI bus interface module will called
+# dwc2_pci.ko and the platform interface module will be called dwc2_platform.ko.
+# At present the host and gadget driver will be separate drivers, but there
+# are plans in the near future to create a dual-role driver.
+
+ifneq ($(CONFIG_USB_DWC2_PCI),)
+	obj-$(CONFIG_USB_DWC2_HOST)	+= dwc2_pci.o
+	dwc2_pci-y			:= pci.o
+endif
+
+ifneq ($(CONFIG_USB_DWC2_PLATFORM),)
+	obj-$(CONFIG_USB_DWC2_HOST)	+= dwc2_platform.o
+	dwc2_platform-y			:= platform.o
 endif
-obj-$(CONFIG_USB_DWC2)			+= dwc2_platform.o
 
-dwc2_pci-y				+= pci.o
-dwc2_platform-y				+= platform.o
+obj-$(CONFIG_USB_DWC2_PERIPHERAL)	+= dwc2_gadget.o
+dwc2_gadget-y				:= gadget.o

drivers/usb/gadget/Kconfig

@@ -300,12 +300,6 @@ config USB_PXA27X
 	   dynamically linked module called "pxa27x_udc" and force all
 	   gadget drivers to also be dynamically linked.
 
-config USB_S3C_HSOTG
-	tristate "Designware/S3C HS/OtG USB Device controller"
-	help
-	  The Designware USB2.0 high-speed gadget controller
-	  integrated into many SoCs.
-
 config USB_S3C2410
 	tristate "S3C2410 USB Device Controller"
 	depends on ARCH_S3C24XX

drivers/usb/gadget/Makefile

@@ -26,7 +26,6 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
-obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_S3C_HSUDC)	+= s3c-hsudc.o
 obj-$(CONFIG_USB_LPC32XX)	+= lpc32xx_udc.o
 obj-$(CONFIG_USB_EG20T)		+= pch_udc.o