Commit 47c15532 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare

hwmon: (lm78) Fix I/O resource conflict with PNP

Only request I/O ports 0x295-0x296 instead of the full I/O address
range. This solves a conflict with PNP resources on a few motherboards.

Also request the I/O ports in two parts (4 low ports, 4 high ports)
during device detection, otherwise the PNP resource make the request
(and thus the detection) fail.

This is the exact same fix that was applied to driver w83781d in
March 2008 to address the same problem:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=2961cb22ef02850d90e7a12c28a14d74e327df8dSigned-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent f908037a
......@@ -655,7 +655,7 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
/* Reserve the ISA region */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!request_region(res->start, LM78_EXTENT, "lm78")) {
if (!request_region(res->start + LM78_ADDR_REG_OFFSET, 2, "lm78")) {
err = -EBUSY;
goto exit;
}
......@@ -699,7 +699,7 @@ static int __devinit lm78_isa_probe(struct platform_device *pdev)
device_remove_file(&pdev->dev, &dev_attr_name);
kfree(data);
exit_release_region:
release_region(res->start, LM78_EXTENT);
release_region(res->start + LM78_ADDR_REG_OFFSET, 2);
exit:
return err;
}
......@@ -711,7 +711,7 @@ static int __devexit lm78_isa_remove(struct platform_device *pdev)
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &lm78_group);
device_remove_file(&pdev->dev, &dev_attr_name);
release_region(data->client.addr, LM78_EXTENT);
release_region(data->client.addr + LM78_ADDR_REG_OFFSET, 2);
kfree(data);
return 0;
......@@ -837,8 +837,17 @@ static int __init lm78_isa_found(unsigned short address)
{
int val, save, found = 0;
if (!request_region(address, LM78_EXTENT, "lm78"))
/* We have to request the region in two parts because some
boards declare base+4 to base+7 as a PNP device */
if (!request_region(address, 4, "lm78")) {
pr_debug("lm78: Failed to request low part of region\n");
return 0;
}
if (!request_region(address + 4, 4, "lm78")) {
pr_debug("lm78: Failed to request high part of region\n");
release_region(address, 4);
return 0;
}
#define REALLY_SLOW_IO
/* We need the timeouts for at least some LM78-like
......@@ -901,7 +910,8 @@ static int __init lm78_isa_found(unsigned short address)
val & 0x80 ? "LM79" : "LM78", (int)address);
release:
release_region(address, LM78_EXTENT);
release_region(address + 4, 4);
release_region(address, 4);
return found;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment