Merge tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix boot issue on single core Lantiq Danube devices

 - fix boot issue on Loongson64 platforms

 - fix improper FPU setup

 - fix missing prototypes issues

* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
  MIPS: loongson64: set nid for reserved memblock region
  Revert "MIPS: loongson64: set nid for reserved memblock region"
  MIPS: lantiq: register smp_ops on non-smp platforms
  MIPS: loongson64: set nid for reserved memblock region
  MIPS: reserve exception vector space ONLY ONCE
  MIPS: BCM63XX: Fix missing prototypes
  MIPS: sgi-ip32: Fix missing prototypes
  MIPS: sgi-ip30: Fix missing prototypes
  MIPS: fw arc: Fix missing prototypes
  MIPS: sgi-ip27: Fix missing prototypes
  MIPS: Alchemy: Fix missing prototypes
  MIPS: Cobalt: Fix missing prototypes

arch/mips/alchemy/common/prom.c

@@ -40,6 +40,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <prom.h>
 
 int prom_argc;
 char **prom_argv;

arch/mips/alchemy/common/setup.c

@@ -30,13 +30,11 @@
 #include <linux/mm.h>
 #include <linux/dma-map-ops.h> /* for dma_default_coherent */
 
+#include <asm/bootinfo.h>
 #include <asm/mipsregs.h>
 
 #include <au1000.h>
 
-extern void __init board_setup(void);
-extern void __init alchemy_set_lpj(void);
-
 static bool alchemy_dma_coherent(void)
 {
 	switch (alchemy_get_cputype()) {

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -702,7 +702,7 @@ static struct ssb_sprom bcm63xx_sprom = {
 	.boardflags_hi		= 0x0000,
 };
 
-int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+static int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
 {
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		memcpy(out, &bcm63xx_sprom, sizeof(struct ssb_sprom));

arch/mips/bcm63xx/dev-rng.c

@@ -26,7 +26,7 @@ static struct platform_device bcm63xx_rng_device = {
 	.resource	= rng_resources,
 };
 
-int __init bcm63xx_rng_register(void)
+static int __init bcm63xx_rng_register(void)
 {
 	if (!BCMCPU_IS_6368())
 		return -ENODEV;

arch/mips/bcm63xx/dev-uart.c

@@ -10,6 +10,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
 
 static struct resource uart0_resources[] = {
 	{

arch/mips/bcm63xx/dev-wdt.c

@@ -34,7 +34,7 @@ static struct platform_device bcm63xx_wdt_device = {
 	},
 };
 
-int __init bcm63xx_wdt_register(void)
+static int __init bcm63xx_wdt_register(void)
 {
 	wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT);
 	wdt_resources[0].end = wdt_resources[0].start;

arch/mips/bcm63xx/irq.c

@@ -72,7 +72,7 @@ static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
  */
 
 #define BUILD_IPIC_INTERNAL(width)					\
-void __dispatch_internal_##width(int cpu)				\
+static void __dispatch_internal_##width(int cpu)			\
 {									\
 	u32 pending[width / 32];					\
 	unsigned int src, tgt;						\

arch/mips/bcm63xx/setup.c

@@ -159,7 +159,7 @@ void __init plat_mem_setup(void)
 	board_setup();
 }
 
-int __init bcm63xx_register_devices(void)
+static int __init bcm63xx_register_devices(void)
 {
 	/* register gpiochip */
 	bcm63xx_gpio_init();

arch/mips/bcm63xx/timer.c

@@ -178,7 +178,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us)
 
 EXPORT_SYMBOL(bcm63xx_timer_set);
 
-int bcm63xx_timer_init(void)
+static int bcm63xx_timer_init(void)
 {
 	int ret, irq;
 	u32 reg;

arch/mips/cobalt/setup.c

@@ -23,9 +23,6 @@
 
 #include <cobalt.h>
 
-extern void cobalt_machine_restart(char *command);
-extern void cobalt_machine_halt(void);
-
 const char *get_system_type(void)
 {
 	switch (cobalt_board_id) {

arch/mips/fw/arc/memory.c

@@ -37,7 +37,7 @@ static unsigned int nr_prom_mem __initdata;
  */
 #define ARC_PAGE_SHIFT	12
 
-struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
+static struct linux_mdesc * __init ArcGetMemoryDescriptor(struct linux_mdesc *Current)
 {
 	return (struct linux_mdesc *) ARC_CALL1(get_mdesc, Current);
 }

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -597,6 +597,9 @@
 
 #include <asm/cpu.h>
 
+void alchemy_set_lpj(void);
+void board_setup(void);
+
 /* helpers to access the SYS_* registers */
 static inline unsigned long alchemy_rdsys(int regofs)
 {

arch/mips/include/asm/mach-cobalt/cobalt.h

@@ -19,4 +19,7 @@ extern int cobalt_board_id;
 #define COBALT_BRD_ID_QUBE2    0x5
 #define COBALT_BRD_ID_RAQ2     0x6
 
+void cobalt_machine_halt(void);
+void cobalt_machine_restart(char *command);
+
 #endif /* __ASM_COBALT_H */

arch/mips/kernel/elf.c

@@ -11,6 +11,7 @@
 
 #include <asm/cpu-features.h>
 #include <asm/cpu-info.h>
+#include <asm/fpu.h>
 
 #ifdef CONFIG_MIPS_FP_SUPPORT
 
@@ -309,6 +310,11 @@ void mips_set_personality_nan(struct arch_elf_state *state)
 	struct cpuinfo_mips *c = &boot_cpu_data;
 	struct task_struct *t = current;
 
+	/* Do this early so t->thread.fpu.fcr31 won't be clobbered in case
+	 * we are preempted before the lose_fpu(0) in start_thread.
+	 */
+	lose_fpu(0);
+
 	t->thread.fpu.fcr31 = c->fpu_csr31;
 	switch (state->nan_2008) {
 	case 0:

arch/mips/kernel/traps.c

@@ -2007,7 +2007,13 @@ unsigned long vi_handlers[64];
 
 void reserve_exception_space(phys_addr_t addr, unsigned long size)
 {
-	memblock_reserve(addr, size);
+	/*
+	 * reserve exception space on CPUs other than CPU0
+	 * is too late, since memblock is unavailable when APs
+	 * up
+	 */
+	if (smp_processor_id() == 0)
+		memblock_reserve(addr, size);
 }
 
 void __init *set_except_vector(int n, void *addr)

arch/mips/lantiq/prom.c

@@ -108,10 +108,9 @@ void __init prom_init(void)
 	prom_init_cmdline();
 
 #if defined(CONFIG_MIPS_MT_SMP)
-	if (cpu_has_mipsmt) {
-		lantiq_smp_ops = vsmp_smp_ops;
+	lantiq_smp_ops = vsmp_smp_ops;
+	if (cpu_has_mipsmt)
 		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
-		register_smp_ops(&lantiq_smp_ops);
-	}
+	register_smp_ops(&lantiq_smp_ops);
 #endif
 }

arch/mips/loongson64/init.c

@@ -103,6 +103,9 @@ void __init szmem(unsigned int node)
 	if (loongson_sysconf.vgabios_addr)
 		memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
 				SZ_256K);
+	/* set nid for reserved memory */
+	memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
+			&memblock.reserved, node);
 }
 
 #ifndef CONFIG_NUMA

arch/mips/loongson64/numa.c

@@ -132,6 +132,8 @@ static void __init node_mem_init(unsigned int node)
 
 		/* Reserve pfn range 0~node[0]->node_start_pfn */
 		memblock_reserve(0, PAGE_SIZE * start_pfn);
+		/* set nid for reserved memory on node 0 */
+		memblock_set_node(0, 1ULL << 44, &memblock.reserved, 0);
 	}
 }
 

arch/mips/sgi-ip27/Makefile

@@ -5,7 +5,7 @@
 
 obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \
 	   ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \
-	   ip27-hubio.o ip27-xtalk.o
+	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o

arch/mips/sgi-ip27/ip27-berr.c

@@ -22,6 +22,8 @@
 #include <asm/traps.h>
 #include <linux/uaccess.h>
 
+#include "ip27-common.h"
+
 static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 {
 	static char *err_type[2][8] = {
@@ -57,7 +59,7 @@ static void dump_hub_information(unsigned long errst0, unsigned long errst1)
 	       [st0.pi_stat0_fmt.s0_err_type] ? : "invalid");
 }
 
-int ip27_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip27_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	unsigned long errst0, errst1;
 	int data = regs->cp0_cause & 4;

arch/mips/sgi-ip27/ip27-common.h

@@ -10,6 +10,7 @@ extern void hub_rt_clock_event_init(void);
 extern void hub_rtc_init(nasid_t nasid);
 extern void install_cpu_nmi_handler(int slice);
 extern void install_ipi(void);
+extern void ip27_be_init(void);
 extern void ip27_reboot_setup(void);
 extern const struct plat_smp_ops ip27_smp_ops;
 extern unsigned long node_getfirstfree(nasid_t nasid);
@@ -17,4 +18,5 @@ extern void per_cpu_init(void);
 extern void replicate_kernel_text(void);
 extern void setup_replication_mask(void);
 
+
 #endif /* __IP27_COMMON_H */

arch/mips/sgi-ip27/ip27-hubio.c

-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 1992-1997, 2000-2003 Silicon Graphics, Inc.
- * Copyright (C) 2004 Christoph Hellwig.
- *
- * Support functions for the HUB ASIC - mostly PIO mapping related.
- */
-
-#include <linux/bitops.h>
-#include <linux/string.h>
-#include <linux/mmzone.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/agent.h>
-#include <asm/sn/io.h>
-#include <asm/xtalk/xtalk.h>
-
-
-static int force_fire_and_forget = 1;
-
-/**
- * hub_pio_map	-  establish a HUB PIO mapping
- *
- * @nasid:	nasid to perform PIO mapping on
- * @widget:	widget ID to perform PIO mapping for
- * @xtalk_addr: xtalk_address that needs to be mapped
- * @size:	size of the PIO mapping
- *
- **/
-unsigned long hub_pio_map(nasid_t nasid, xwidgetnum_t widget,
-			  unsigned long xtalk_addr, size_t size)
-{
-	unsigned i;
-
-	/* use small-window mapping if possible */
-	if ((xtalk_addr % SWIN_SIZE) + size <= SWIN_SIZE)
-		return NODE_SWIN_BASE(nasid, widget) + (xtalk_addr % SWIN_SIZE);
-
-	if ((xtalk_addr % BWIN_SIZE) + size > BWIN_SIZE) {
-		printk(KERN_WARNING "PIO mapping at hub %d widget %d addr 0x%lx"
-				" too big (%ld)\n",
-				nasid, widget, xtalk_addr, size);
-		return 0;
-	}
-
-	xtalk_addr &= ~(BWIN_SIZE-1);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++) {
-		if (test_and_set_bit(i, hub_data(nasid)->h_bigwin_used))
-			continue;
-
-		/*
-		 * The code below does a PIO write to setup an ITTE entry.
-		 *
-		 * We need to prevent other CPUs from seeing our updated
-		 * memory shadow of the ITTE (in the piomap) until the ITTE
-		 * entry is actually set up; otherwise, another CPU might
-		 * attempt a PIO prematurely.
-		 *
-		 * Also, the only way we can know that an entry has been
-		 * received  by the hub and can be used by future PIO reads/
-		 * writes is by reading back the ITTE entry after writing it.
-		 *
-		 * For these two reasons, we PIO read back the ITTE entry
-		 * after we write it.
-		 */
-		IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr);
-		__raw_readq(IIO_ITTE_GET(nasid, i));
-
-		return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE);
-	}
-
-	printk(KERN_WARNING "unable to establish PIO mapping for at"
-			" hub %d widget %d addr 0x%lx\n",
-			nasid, widget, xtalk_addr);
-	return 0;
-}
-
-
-/*
- * hub_setup_prb(nasid, prbnum, credits, conveyor)
- *
- *	Put a PRB into fire-and-forget mode if conveyor isn't set.  Otherwise,
- *	put it into conveyor belt mode with the specified number of credits.
- */
-static void hub_setup_prb(nasid_t nasid, int prbnum, int credits)
-{
-	union iprb_u prb;
-	int prb_offset;
-
-	/*
-	 * Get the current register value.
-	 */
-	prb_offset = IIO_IOPRB(prbnum);
-	prb.iprb_regval = REMOTE_HUB_L(nasid, prb_offset);
-
-	/*
-	 * Clear out some fields.
-	 */
-	prb.iprb_ovflow = 1;
-	prb.iprb_bnakctr = 0;
-	prb.iprb_anakctr = 0;
-
-	/*
-	 * Enable or disable fire-and-forget mode.
-	 */
-	prb.iprb_ff = force_fire_and_forget ? 1 : 0;
-
-	/*
-	 * Set the appropriate number of PIO credits for the widget.
-	 */
-	prb.iprb_xtalkctr = credits;
-
-	/*
-	 * Store the new value to the register.
-	 */
-	REMOTE_HUB_S(nasid, prb_offset, prb.iprb_regval);
-}
-
-/**
- * hub_set_piomode  -  set pio mode for a given hub
- *
- * @nasid:	physical node ID for the hub in question
- *
- * Put the hub into either "PIO conveyor belt" mode or "fire-and-forget" mode.
- * To do this, we have to make absolutely sure that no PIOs are in progress
- * so we turn off access to all widgets for the duration of the function.
- *
- * XXX - This code should really check what kind of widget we're talking
- * to.	Bridges can only handle three requests, but XG will do more.
- * How many can crossbow handle to widget 0?  We're assuming 1.
- *
- * XXX - There is a bug in the crossbow that link reset PIOs do not
- * return write responses.  The easiest solution to this problem is to
- * leave widget 0 (xbow) in fire-and-forget mode at all times.	This
- * only affects pio's to xbow registers, which should be rare.
- **/
-static void hub_set_piomode(nasid_t nasid)
-{
-	u64 ii_iowa;
-	union hubii_wcr_u ii_wcr;
-	unsigned i;
-
-	ii_iowa = REMOTE_HUB_L(nasid, IIO_OUTWIDGET_ACCESS);
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, 0);
-
-	ii_wcr.wcr_reg_value = REMOTE_HUB_L(nasid, IIO_WCR);
-
-	if (ii_wcr.iwcr_dir_con) {
-		/*
-		 * Assume a bridge here.
-		 */
-		hub_setup_prb(nasid, 0, 3);
-	} else {
-		/*
-		 * Assume a crossbow here.
-		 */
-		hub_setup_prb(nasid, 0, 1);
-	}
-
-	/*
-	 * XXX - Here's where we should take the widget type into
-	 * when account assigning credits.
-	 */
-	for (i = HUB_WIDGET_ID_MIN; i <= HUB_WIDGET_ID_MAX; i++)
-		hub_setup_prb(nasid, i, 3);
-
-	REMOTE_HUB_S(nasid, IIO_OUTWIDGET_ACCESS, ii_iowa);
-}
-
-/*
- * hub_pio_init	 -  PIO-related hub initialization
- *
- * @hub:	hubinfo structure for our hub
- */
-void hub_pio_init(nasid_t nasid)
-{
-	unsigned i;
-
-	/* initialize big window piomaps for this hub */
-	bitmap_zero(hub_data(nasid)->h_bigwin_used, HUB_NUM_BIG_WINDOW);
-	for (i = 0; i < HUB_NUM_BIG_WINDOW; i++)
-		IIO_ITTE_DISABLE(nasid, i);
-
-	hub_set_piomode(nasid);
-}

arch/mips/sgi-ip27/ip27-irq.c

@@ -23,6 +23,8 @@
 #include <asm/sn/intr.h>
 #include <asm/sn/irq_alloc.h>
 
+#include "ip27-common.h"
+
 struct hub_irq_data {
 	u64	*irq_mask[2];
 	cpuid_t	cpu;

arch/mips/sgi-ip27/ip27-memory.c

@@ -23,6 +23,7 @@
 #include <asm/page.h>
 #include <asm/pgalloc.h>
 #include <asm/sections.h>
+#include <asm/sgialib.h>
 
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>

arch/mips/sgi-ip27/ip27-nmi.c

@@ -11,6 +11,8 @@
 #include <asm/sn/arch.h>
 #include <asm/sn/agent.h>
 
+#include "ip27-common.h"
+
 #if 0
 #define NODE_NUM_CPUS(n)	CNODE_NUM_CPUS(n)
 #else
@@ -23,16 +25,7 @@
 typedef unsigned long machreg_t;
 
 static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-
-/*
- * Let's see what else we need to do here. Set up sp, gp?
- */
-void nmi_dump(void)
-{
-	void cont_nmi_dump(void);
-
-	cont_nmi_dump();
-}
+static void nmi_dump(void);
 
 void install_cpu_nmi_handler(int slice)
 {
@@ -53,7 +46,7 @@ void install_cpu_nmi_handler(int slice)
  * into the eframe format for the node under consideration.
  */
 
-void nmi_cpu_eframe_save(nasid_t nasid, int slice)
+static void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 {
 	struct reg_struct *nr;
 	int		i;
@@ -129,7 +122,7 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	pr_emerg("\n");
 }
 
-void nmi_dump_hub_irq(nasid_t nasid, int slice)
+static void nmi_dump_hub_irq(nasid_t nasid, int slice)
 {
 	u64 mask0, mask1, pend0, pend1;
 
@@ -153,7 +146,7 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice)
  * Copy the cpu registers which have been saved in the IP27prom format
  * into the eframe format for the node under consideration.
  */
-void nmi_node_eframe_save(nasid_t nasid)
+static void nmi_node_eframe_save(nasid_t nasid)
 {
 	int slice;
 
@@ -170,8 +163,7 @@ void nmi_node_eframe_save(nasid_t nasid)
 /*
  * Save the nmi cpu registers for all cpus in the system.
  */
-void
-nmi_eframes_save(void)
+static void nmi_eframes_save(void)
 {
 	nasid_t nasid;
 
@@ -179,8 +171,7 @@ nmi_eframes_save(void)
 		nmi_node_eframe_save(nasid);
 }
 
-void
-cont_nmi_dump(void)
+static void nmi_dump(void)
 {
 #ifndef REAL_NMI_SIGNAL
 	static atomic_t nmied_cpus = ATOMIC_INIT(0);

arch/mips/sgi-ip30/ip30-console.c

@@ -3,6 +3,7 @@
 #include <linux/io.h>
 
 #include <asm/sn/ioc3.h>
+#include <asm/setup.h>
 
 static inline struct ioc3_uartregs *console_uart(void)
 {

arch/mips/sgi-ip30/ip30-setup.c

@@ -14,6 +14,7 @@
 #include <linux/percpu.h>
 #include <linux/memblock.h>
 
+#include <asm/bootinfo.h>
 #include <asm/smp-ops.h>
 #include <asm/sgialib.h>
 #include <asm/time.h>

arch/mips/sgi-ip32/crime.c

@@ -18,6 +18,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/mace.h>
 
+#include "ip32-common.h"
+
 struct sgi_crime __iomem *crime;
 struct sgi_mace __iomem *mace;
 
@@ -39,7 +41,7 @@ void __init crime_init(void)
 	       id, rev, field, (unsigned long) CRIME_BASE);
 }
 
-irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_memerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat, addr;
 	int fatal = 0;
@@ -90,7 +92,7 @@ irqreturn_t crime_memerr_intr(unsigned int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-irqreturn_t crime_cpuerr_intr(unsigned int irq, void *dev_id)
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id)
 {
 	unsigned long stat = crime->cpu_error_stat & CRIME_CPU_ERROR_MASK;
 	unsigned long addr = crime->cpu_error_addr & CRIME_CPU_ERROR_ADDR_MASK;

arch/mips/sgi-ip32/ip32-berr.c

@@ -18,6 +18,8 @@
 #include <asm/ptrace.h>
 #include <asm/tlbdebug.h>
 
+#include "ip32-common.h"
+
 static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
 {
 	int data = regs->cp0_cause & 4;

arch/mips/sgi-ip32/ip32-common.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __IP32_COMMON_H
+#define __IP32_COMMON_H
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+
+void __init crime_init(void);
+irqreturn_t crime_memerr_intr(int irq, void *dev_id);
+irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
+void __init ip32_be_init(void);
+void ip32_prepare_poweroff(void);
+
+#endif /* __IP32_COMMON_H */

arch/mips/sgi-ip32/ip32-irq.c

@@ -28,6 +28,8 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 /* issue a PIO read to make sure no PIO writes are pending */
 static inline void flush_crime_bus(void)
 {
@@ -107,10 +109,6 @@ static inline void flush_mace_bus(void)
  * is quite different anyway.
  */
 
-/* Some initial interrupts to set up */
-extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
-extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-
 /*
  * This is for pure CRIME interrupts - ie not MACE.  The advantage?
  * We get to split the register in half and do faster lookups.

arch/mips/sgi-ip32/ip32-memory.c

@@ -15,6 +15,7 @@
 #include <asm/ip32/crime.h>
 #include <asm/bootinfo.h>
 #include <asm/page.h>
+#include <asm/sgialib.h>
 
 extern void crime_init(void);
 

arch/mips/sgi-ip32/ip32-reset.c

@@ -29,6 +29,8 @@
 #include <asm/ip32/crime.h>
 #include <asm/ip32/ip32_ints.h>
 
+#include "ip32-common.h"
+
 #define POWERDOWN_TIMEOUT	120
 /*
  * Blink frequency during reboot grace period and when panicked.

arch/mips/sgi-ip32/ip32-setup.c

@@ -26,8 +26,7 @@
 #include <asm/ip32/mace.h>
 #include <asm/ip32/ip32_ints.h>
 
-extern void ip32_be_init(void);
-extern void crime_init(void);
+#include "ip32-common.h"
 
 #ifdef CONFIG_SGI_O2MACE_ETH
 /*