Skip to content

L
linux
Commit 485790d0 authored by Maya Erez's avatar Maya Erez Committed by Kalle Valo
Browse files
Options

wil6210: add support for Talyn-MB (Talyn ver 2.0) device 

Add changes to support initialization of Talyn-MB wil6210
device:
- Add definition for Talyn-MB new JTAG id
- Define talyn_mb_fw_mapping array
- Add Talyn-MB reset sequence
Signed-off-by: default avatarMaya Erez <merez@codeaurora.org>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 8530b4e7
Hide whitespace changes
Inline Side-by-side
Showing with 113 additions and 12 deletions
drivers/net/wireless/ath/wil6210/main.c
View file @ 485790d0
......@@ -736,14 +736,24 @@ static void wil_bl_prepare_halt(struct wil6210_priv *wil)
static inline void wil_halt_cpu(struct wil6210_priv *wil)
{
wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
wil_w(wil, RGF_USER_MAC_CPU_0, BIT_USER_MAC_CPU_MAN_RST);
if (wil->hw_version >= HW_VER_TALYN_MB) {
wil_w(wil, RGF_USER_USER_CPU_0_TALYN_MB,
BIT_USER_USER_CPU_MAN_RST);
wil_w(wil, RGF_USER_MAC_CPU_0_TALYN_MB,
BIT_USER_MAC_CPU_MAN_RST);
} else {
wil_w(wil, RGF_USER_USER_CPU_0, BIT_USER_USER_CPU_MAN_RST);
wil_w(wil, RGF_USER_MAC_CPU_0, BIT_USER_MAC_CPU_MAN_RST);
}
}
static inline void wil_release_cpu(struct wil6210_priv *wil)
{
/* Start CPU */
wil_w(wil, RGF_USER_USER_CPU_0, 1);
if (wil->hw_version >= HW_VER_TALYN_MB)
wil_w(wil, RGF_USER_USER_CPU_0_TALYN_MB, 1);
else
wil_w(wil, RGF_USER_USER_CPU_0, 1);
}
static void wil_set_oob_mode(struct wil6210_priv *wil, u8 mode)
......@@ -811,10 +821,17 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x3ff81f);
wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0xf);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xFE000000);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003F);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xFFE7FE00);
if (wil->hw_version >= HW_VER_TALYN_MB) {
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0x7e000000);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003f);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0xc00000f0);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xffe7fe00);
} else {
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_2, 0xfe000000);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_1, 0x0000003f);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_3, 0x000000f0);
wil_w(wil, RGF_USER_CLKS_CTL_SW_RST_VEC_0, 0xffe7fe00);
}
wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_0, 0x0);
wil_w(wil, RGF_USER_CLKS_CTL_EXT_SW_RST_VEC_1, 0x0);
......@@ -1042,8 +1059,14 @@ static int wil_get_otp_info(struct wil6210_priv *wil)
struct net_device *ndev = wil->main_ndev;
struct wiphy *wiphy = wil_to_wiphy(wil);
u8 mac[8];
int mac_addr;
if (wil->hw_version >= HW_VER_TALYN_MB)
mac_addr = RGF_OTP_MAC_TALYN_MB;
else
mac_addr = RGF_OTP_MAC;
wil_memcpy_fromio_32(mac, wil->csr + HOSTADDR(RGF_OTP_MAC),
wil_memcpy_fromio_32(mac, wil->csr + HOSTADDR(mac_addr),
sizeof(mac));
if (!is_valid_ether_addr(mac)) {
wil_err(wil, "Invalid MAC %pM\n", mac);
......@@ -1147,8 +1170,13 @@ static void wil_pre_fw_config(struct wil6210_priv *wil)
/* it is W1C, clear by writing back same value */
wil_s(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, ICR), 0);
wil_w(wil, RGF_CAF_ICR + offsetof(struct RGF_ICR, IMV), ~0);
/* clear PAL_UNIT_ICR (potential D0->D3 leftover) */
wil_s(wil, RGF_PAL_UNIT_ICR + offsetof(struct RGF_ICR, ICR), 0);
/* clear PAL_UNIT_ICR (potential D0->D3 leftover)
* In Talyn-MB host cannot access this register due to
* access control, hence PAL_UNIT_ICR is cleared by the FW
*/
if (wil->hw_version < HW_VER_TALYN_MB)
wil_s(wil, RGF_PAL_UNIT_ICR + offsetof(struct RGF_ICR, ICR),
0);
if (wil->fw_calib_result > 0) {
__le32 val = cpu_to_le32(wil->fw_calib_result |
......
drivers/net/wireless/ath/wil6210/pcie_bus.c
View file @ 485790d0
......@@ -85,7 +85,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
wil->rgf_ucode_assert_code_addr = SPARROW_RGF_UCODE_ASSERT_CODE;
break;
case JTAG_DEV_ID_TALYN:
wil->hw_name = "Talyn";
wil->hw_name = "Talyn-MA";
wil->hw_version = HW_VER_TALYN;
memcpy(fw_mapping, talyn_fw_mapping, sizeof(talyn_fw_mapping));
wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
......@@ -94,6 +94,15 @@ int wil_set_capabilities(struct wil6210_priv *wil)
BIT_NO_FLASH_INDICATION)
set_bit(hw_capa_no_flash, wil->hw_capa);
break;
case JTAG_DEV_ID_TALYN_MB:
wil->hw_name = "Talyn-MB";
wil->hw_version = HW_VER_TALYN_MB;
memcpy(fw_mapping, talyn_mb_fw_mapping,
sizeof(talyn_mb_fw_mapping));
wil->rgf_fw_assert_code_addr = TALYN_RGF_FW_ASSERT_CODE;
wil->rgf_ucode_assert_code_addr = TALYN_RGF_UCODE_ASSERT_CODE;
set_bit(hw_capa_no_flash, wil->hw_capa);
break;
default:
wil_err(wil, "Unknown board hardware, chip_id 0x%08x, chip_revision 0x%08x\n",
jtag_id, chip_revision);
......
drivers/net/wireless/ath/wil6210/wil6210.h
View file @ 485790d0
......@@ -311,14 +311,20 @@ struct RGF_ICR {
#define RGF_USER_JTAG_DEV_ID (0x880b34) /* device ID */
#define JTAG_DEV_ID_SPARROW (0x2632072f)
#define JTAG_DEV_ID_TALYN (0x7e0e1)
#define JTAG_DEV_ID_TALYN_MB (0x1007e0e1)
#define RGF_USER_REVISION_ID (0x88afe4)
#define RGF_USER_REVISION_ID_MASK (3)
#define REVISION_ID_SPARROW_B0 (0x0)
#define REVISION_ID_SPARROW_D0 (0x3)
#define RGF_OTP_MAC_TALYN_MB (0x8a0304)
#define RGF_OTP_MAC (0x8a0620)
/* Talyn-MB */
#define RGF_USER_USER_CPU_0_TALYN_MB (0x8c0138)
#define RGF_USER_MAC_CPU_0_TALYN_MB (0x8c0154)
/* crash codes for FW/Ucode stored here */
/* ASSERT RGFs */
......@@ -332,6 +338,7 @@ enum {
HW_VER_SPARROW_B0, /* REVISION_ID_SPARROW_B0 */
HW_VER_SPARROW_D0, /* REVISION_ID_SPARROW_D0 */
HW_VER_TALYN, /* JTAG_DEV_ID_TALYN */
HW_VER_TALYN_MB /* JTAG_DEV_ID_TALYN_MB */
};
/* popular locations */
......@@ -349,7 +356,8 @@ enum {
/* Hardware definitions end */
#define SPARROW_FW_MAPPING_TABLE_SIZE 10
#define TALYN_FW_MAPPING_TABLE_SIZE 13
#define MAX_FW_MAPPING_TABLE_SIZE 13
#define TALYN_MB_FW_MAPPING_TABLE_SIZE 19
#define MAX_FW_MAPPING_TABLE_SIZE 19
struct fw_map {
u32 from; /* linker address - from, inclusive */
......@@ -363,6 +371,7 @@ struct fw_map {
extern const struct fw_map sparrow_fw_mapping[SPARROW_FW_MAPPING_TABLE_SIZE];
extern const struct fw_map sparrow_d0_mac_rgf_ext;
extern const struct fw_map talyn_fw_mapping[TALYN_FW_MAPPING_TABLE_SIZE];
extern const struct fw_map talyn_mb_fw_mapping[TALYN_MB_FW_MAPPING_TABLE_SIZE];
extern struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
/**
......
drivers/net/wireless/ath/wil6210/wmi.c
View file @ 485790d0
......@@ -164,6 +164,61 @@ const struct fw_map talyn_fw_mapping[] = {
{0x800000, 0x808000, 0xa78000, "uc_data", false},
};
/**
* @talyn_mb_fw_mapping provides memory remapping table for Talyn-MB
*
* array size should be in sync with the declaration in the wil6210.h
*
* Talyn MB memory mapping:
* Linker address PCI/Host address
* 0x880000 .. 0xc80000 4Mb BAR0
* 0x800000 .. 0x820000 0xa00000 .. 0xa20000 128k DCCM
* 0x840000 .. 0x858000 0xa20000 .. 0xa38000 96k PERIPH
*/
const struct fw_map talyn_mb_fw_mapping[] = {
/* FW code RAM 768k */
{0x000000, 0x0c0000, 0x900000, "fw_code", true},
/* FW data RAM 128k */
{0x800000, 0x820000, 0xa00000, "fw_data", true},
/* periph. data RAM 96k */
{0x840000, 0x858000, 0xa20000, "fw_peri", true},
/* various RGF 40k */
{0x880000, 0x88a000, 0x880000, "rgf", true},
/* AGC table 4k */
{0x88a000, 0x88b000, 0x88a000, "AGC_tbl", true},
/* Pcie_ext_rgf 4k */
{0x88b000, 0x88c000, 0x88b000, "rgf_ext", true},
/* mac_ext_rgf 2256b */
{0x88c000, 0x88c8d0, 0x88c000, "mac_rgf_ext", true},
/* ext USER RGF 4k */
{0x88d000, 0x88e000, 0x88d000, "ext_user_rgf", true},
/* SEC PKA 16k */
{0x890000, 0x894000, 0x890000, "sec_pka", true},
/* SEC KDF RGF 3096b */
{0x898000, 0x898c18, 0x898000, "sec_kdf_rgf", true},
/* SEC MAIN 2124b */
{0x89a000, 0x89a84c, 0x89a000, "sec_main", true},
/* OTP 4k */
{0x8a0000, 0x8a1000, 0x8a0000, "otp", true},
/* DMA EXT RGF 64k */
{0x8b0000, 0x8c0000, 0x8b0000, "dma_ext_rgf", true},
/* DUM USER RGF 528b */
{0x8c0000, 0x8c0210, 0x8c0000, "dum_user_rgf", true},
/* DMA OFU 296b */
{0x8c2000, 0x8c2128, 0x8c2000, "dma_ofu", true},
/* ucode debug 4k */
{0x8c3000, 0x8c4000, 0x8c3000, "ucode_debug", true},
/* upper area 1536k */
{0x900000, 0xa80000, 0x900000, "upper", true},
/* UCODE areas - accessible by debugfs blobs but not by
* wmi_addr_remap. UCODE areas MUST be added AFTER FW areas!
*/
/* ucode code RAM 256k */
{0x000000, 0x040000, 0xa38000, "uc_code", false},
/* ucode data RAM 32k */
{0x800000, 0x808000, 0xa78000, "uc_data", false},
};
struct fw_map fw_mapping[MAX_FW_MAPPING_TABLE_SIZE];
struct blink_on_off_time led_blink_time[] = {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7